[PATCH v14 0/17] Add Analogix Core Display Port Driver
Caesar Wang
caesar.upstream at gmail.com
Thu Mar 17 23:41:09 PDT 2016
Hi all,
I pick this series up and test on C101PA chromebook, after Heiko update
the 3 patches.
[v14.1,09/17] drm: rockchip: dp: add rockchip platform dp driver
[v14.1,04/17] drm: bridge: analogix/dp: fix some obvious code style
[v14.1,01/17] drm: bridge: analogix/dp: split exynos dp driver to bridge
directory
C101PA chromebook:
http://www.amazon.co.uk/10-1-Inch-Chromebook-Rockchip-Integrated-Graphics/dp/B0107N7WT6/ref=lp_758129031_1_4?s=computers&ie=UTF8&qid=1458282912&sr=1-4
So, verified for the rockchip eDp contrller on my github.
https://github.com/Caesar-github/rockchip/tree/veyron/next-stable-chromeos
在 2016年02月15日 19:08, Yakir Yang 写道:
> Hi all,
>
> The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
> share the same IP, so a lot of parts can be re-used. I split the common
> code into bridge directory, then rk3288 and exynos only need to keep
> some platform code. Cause I can't find the exact IP name of exynos dp
> controller, so I decide to name dp core driver with "analogix" which I
> find in rk3288 eDP TRM
>
> But there are still three light registers setting different between
> exynos and rk3288.
> 1. RK3288 have five special pll registers which not indicate in exynos
> dp controller.
> 2. The address of DP_PHY_PD(dp phy power manager register) are different
> between rk3288 and exynos.
> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
> register).
>
> Due to Mark Yao have introduced the ATOMIC support to Rockchip drm, so it's
> okay to use the ATOMIC helpers functions in connector_funcs. No need to splict
> the connector init to platform driver anymore, and this is the biggest change
> since version 11.
>
> This v14 didn't have lots of new changes which seems not the correct time to
> upgrade the version number, but I have changed ordering of patches (adding 2
> more, and removing 2 out). Especially to prevent confusing people, so I updated
> the whole series.
>
> Thanks,
> - Yakir
>
>
> Changes in v14:
> - Rebase the new changes in imx-dp driver
> - Split up this patch into 3 parts, make this easy to review (Heiko)
> - Remove the Rockchip DP PHY to an separate thread (Heiko)
> https://patchwork.kernel.org/patch/8312701/
>
> Changes in v13:
> - Use .enable instead of preprare/commit in encoder_helper_funcs (Heiko)
> - Fix the missing parameters with drm_encoder_init() helper function. (Heiko)
>
> Changes in v12:
> - Move the connector init to analogix_dp driver, and using ATOMIC helper (Heiko)
> - Add the ack from Jingoo
> - Remove the enum link_rate_type struct, using the marcos in drm_dp_helper.h (Jingoo)
>
> Changes in v11:
> - Uses tabs to fix the indentation issues in analogix_dp_core.h (Heiko)
> - Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
> - Add the ack from Rob Herring
> - Revert parts of Gustavo Padovan's changes in commit:
> drm/exynos: do not start enabling DP at bind() phase
> Add dp phy poweron function in bind time.
> - Move the panel prepare from get_modes time to bind time, and move
> the panel unprepare from bridge->disable to unbind time. (Heiko)
>
> Changes in v10:
> - Add the ack from Rob Herring
> - Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here (Heiko)
> - Add the ack from Rob Herring
> - Remove the surplus "plat_data" check. (Heiko)
> - switch (dp->plat_data && dp->plat_data->dev_type) {
> + switch (dp->plat_data->dev_type) {
>
> Changes in v9:
> - Document more details for 'ports' property.
>
> Changes in v8:
> - Correct the right document path of display-timing.txt (Heiko)
> - Correct the misspell of 'from' to 'frm'. (Heiko)
> - Modify the commit subject name. (Heiko)
>
> Changes in v7:
> - Back to use the of_property_read_bool() interfacs to provoid backward
> compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
> to avoid -EOVERFLOW error (Krzysztof)
>
> Changes in v6:
> - Fix the Kconfig recursive dependency (Javier)
> - Fix Peach Pit hpd property name error:
> - hpd-gpio = <&gpx2 6 0>;
> + hpd-gpios = <&gpx2 6 0>;
>
> Changes in v5:
> - Correct the check condition of gpio_is_valid when driver try to get
> the "hpd-gpios" DT propery. (Heiko)
> - Move the platform attach callback in the front of core driver bridge
> attch function. Cause once platform failed at attach, core driver should
> still failed, so no need to init connector before platform attached (Krzysztof)
> - Keep code style no changes with the previous exynos_dp_code.c in this
> patch, and update commit message about the new export symbol (Krzysztof)
> - Gather the device type patch (v4 11/16) into this one. (Krzysztof)
> - leave out the connector registration to analogix platform driver. (Thierry)
> - Resequence this patch after analogix_dp driver have been split
> from exynos_dp code, and rephrase reasonable commit message, and
> remove some controversial style (Krzysztof)
> - analogix_dp_write_byte_to_dpcd(
> - dp, DP_TEST_RESPONSE,
> + analogix_dp_write_byte_to_dpcd(dp,
> + DP_TEST_RESPONSE,
> DP_TEST_EDID_CHECKSUM_WRITE);
> - Switch video timing type to "u32", so driver could use "of_property_read_u32"
> to get the backword timing values. Krzysztof suggest me that driver could use
> the "of_property_read_bool" to get backword timing values, but that interfacs
> would modify the original drm_display_mode timing directly (whether those
> properties exists or not).
> - Correct the misspell in commit message. (Krzysztof)
> - Remove the empty line at the end of document, and correct the endpoint
> numbers in the example DT node, and remove the regulator iomux setting
> in driver code while using the pinctl in devicetree instead. (Heiko)
> - Add device type declared, cause the previous "platform device type
> support (v4 11/16)" already merge into (v5 02/14).
> - Implement connector registration code. (Thierry)
> - Split binding doc's from driver changes. (Rob)
> - Add eDP hotplug pinctrl property. (Heiko)
>
> Changes in v4:
> - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob)
> - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo)
> - Create a separate folder for analogix code in bridge/ (Archit)
> - Update commit message more readable. (Jingoo)
> - Adjust the order from 05 to 04
> - Provide backword compatibility with samsung. (Krzysztof)
> - Split all DTS changes, and provide backward compatibility. Mark old
> properties as deprecated but still support them. (Krzysztof)
> - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
> - Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
> "analogix,color-space" & "analogix,color-depth" &
> "analogix,link-rate" & "analogix,lane-count" &
> "analogix,ycbcr-coeff" & "analogix,dynamic-range" &
> "vsync-active-high" & "hsync-active-high" & "interlaces"
> - Separate all DTS changes to a separate patch. (Krzysztof)
> - Remove some deprecated DT properties in rockchip dp document.
> - Seprate the link-rate and lane-count limit out with the device_type
> flag. (Thierry)
> - Take Jingoo suggest, add commit messages.
> - Call drm_panel_prepare() in .get_modes function, ensure panel should
> power on before driver try to read edid message.
>
> Changes in v3:
> - Move exynos's video_timing code to analogix_dp-exynos platform driver,
> add get_modes method to struct analogix_dp_plat_data. (Thierry)
> - Rename some "samsung*" dts propery to "analogix*". (Heiko)
> - The link_rate and lane_count shouldn't config to the DT property value
> directly, but we can take those as hardware limite. For example, RK3288
> only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
> like "link-rate = 0x0a" "lane-count = 4". (Thierry)
> - Dynamic parse video timing info from struct drm_display_mode and
> struct drm_display_info. (Thierry)
> - Add devicetree binding documents. (Heiko)
> - Remove sync pol & colorimetry properies from the new analogix dp driver
> devicetree binding. (Thierry)
> - Update the exist exynos dtsi file with the latest DP DT properies.
> - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m",
> and leave "sclk_edp" to analogix dp core driver which name to "dp",
> and leave "pclk_edp" to rockchip dp platform driver which name to
> "pclk". (Thierry & Heiko)
> - Add devicetree binding document. (Heiko)
> - Remove "rockchip,panel" DT property, take use of remote point to get panel
> node. (Heiko)
> - Add the new function point dp_platdata->get_modes() init.
> - Add "analogix,need-force-hpd" to indicate whether driver need foce
> hpd when hpd detect failed.
> - move dp hpd detect to connector detect function.
> - Add edid modes parse support
>
> Changes in v2:
> - Remove new copyright (Jingoo)
> - Fix compiled failed due to analogix_dp_device misspell
> - Improved commit message more readable, and avoid using some
> uncommon style like bellow: (Joe Preches)
> - retval = exynos_dp_read_bytes_from_i2c(...
> ...);
> + retval =
> + exynos_dp_read_bytes_from_i2c(......);
> - Get panel node with remote-endpoint method, and create devicetree binding
> for driver. (Heiko)
> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
> leave those clock to rockchip dp phy driver.
> - Fix compile failed dut to phy_pd_addr variable misspell error
>
> Heiko Stuebner (2):
> drm/exynos: dp: rename implementation specific driver part
> drm: bridge: analogix/dp: rename register constants
>
> Yakir Yang (15):
> drm: bridge: analogix/dp: split exynos dp driver to bridge directory
> drm: bridge: analogix/dp: fix some obvious code style
> drm: bridge: analogix/dp: remove duplicate configuration of link rate
> and link count
> drm: bridge: analogix/dp: dynamic parse sync_pol & interlace &
> dynamic_range
> dt-bindings: add document for analogix display port driver
> ARM: dts: exynos/dp: remove some properties that deprecated by
> analogix_dp driver
> drm: rockchip: dp: add rockchip platform dp driver
> dt-bindings: add document for rockchip variant of analogix_dp
> drm: bridge: analogix/dp: add some rk3288 special registers setting
> drm: bridge: analogix/dp: add max link rate and lane count limit for
> RK3288
> drm: bridge: analogix/dp: try force hpd after plug in lookup failed
> drm: bridge: analogix/dp: move hpd detect to connector detect function
> drm: bridge: analogix/dp: add edid modes parse in get_modes method
> drm: bridge: analogix/dp: add panel prepare/unprepare in
> suspend/resume time
> drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable
> time
>
> .../bindings/display/bridge/analogix_dp.txt | 52 +
> .../bindings/display/exynos/exynos_dp.txt | 93 +-
> .../display/rockchip/analogix_dp-rockchip.txt | 92 ++
> arch/arm/boot/dts/exynos5250-arndale.dts | 2 -
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 -
> arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 +-
> arch/arm/boot/dts/exynos5250-spring.dts | 4 +-
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 +-
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 -
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 -
> drivers/gpu/drm/bridge/Kconfig | 2 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/analogix/Kconfig | 3 +
> drivers/gpu/drm/bridge/analogix/Makefile | 1 +
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1430 ++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 281 ++++
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 1320 +++++++++++++++++
> .../analogix/analogix_dp_reg.h} | 270 ++--
> drivers/gpu/drm/exynos/Kconfig | 3 +-
> drivers/gpu/drm/exynos/Makefile | 2 +-
> drivers/gpu/drm/exynos/exynos_dp.c | 324 +++++
> drivers/gpu/drm/exynos/exynos_dp_core.c | 1510 --------------------
> drivers/gpu/drm/exynos/exynos_dp_core.h | 282 ----
> drivers/gpu/drm/exynos/exynos_dp_reg.c | 1263 ----------------
> drivers/gpu/drm/rockchip/Kconfig | 9 +
> drivers/gpu/drm/rockchip/Makefile | 1 +
> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 384 +++++
> include/drm/bridge/analogix_dp.h | 41 +
> 28 files changed, 4115 insertions(+), 3269 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> create mode 100644 Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
> create mode 100644 drivers/gpu/drm/bridge/analogix/Kconfig
> create mode 100644 drivers/gpu/drm/bridge/analogix/Makefile
> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> rename drivers/gpu/drm/{exynos/exynos_dp_reg.h => bridge/analogix/analogix_dp_reg.h} (62%)
> create mode 100644 drivers/gpu/drm/exynos/exynos_dp.c
> delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c
> delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
> delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c
> create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> create mode 100644 include/drm/bridge/analogix_dp.h
>
--
Thanks,
Caesar
More information about the linux-arm-kernel
mailing list