[PATCH] clocksource/arm_global_timer.c: Reduce the rating from 300 to 150

[Grygorii Strashko]

Hi Mike,

On 03/17/2016 09:15 AM, Mike Looijmans wrote:
> The arm_global_timer clock runs on the CPU clock, and does not correct
> for cpufreq scaling. This makes the clock not very suitable as a
> clocksource, and basically any clock running on an independent
> oscilator is preferable. Few clocksources have a rating over 300,
> so this clock usually gets selected as clock source.
> 
> On the Zynq-7000 for example, the TTC clock on the chip is preferred
> to the global timer, because the TTC can at least compensate for
> cpufreq scaling. That makes the TTC (which rates itself 200) a much
> better clock source than the ARM global timer.
> 
> Reduce the rating to 150 to make systems select the ARM global timer
> as a last resort instead of a first choice.

Yeh. All this clocksource/clockevent/sched_clock selection process is not really clear and
not always works in case of muliplatform build :..(

For example, I've had opposite case recently :( I have to reduce rating of OMAP gp_timer (300->290),
so it will be possible to use ARM GT as clocksource when no-CPUFrq and no-CPUIdle.

When I've tried to deal with it, I've been thinking about smth. like this:
- explicitly define set and initialization sequence of devices
 chosen {
	linux,clocksource = <&clksrc1>, <&clksrc2>..
	linux,clockevent = <&clkevt1>, <&clkevt2>..

- or mark devices's nodes
  timer1: timer at 4ae18000 {
		compatible = "ti,omap5430-timer";
		linux,clocksource;
		linux,clockevent;

but I were not able to proceed further due lack of time (^ might cause difficult DT discussion). 

Would it work for you if it will be possible to simply disable ARM GT when needed [1]?

[1] http://www.spinics.net/lists/arm-kernel/msg480166.html

> 
> Signed-off-by: Mike Looijmans <mike.looijmans at topic.nl>
> ---
>   drivers/clocksource/arm_global_timer.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
> index 9df0d16..bb410eb 100644
> --- a/drivers/clocksource/arm_global_timer.c
> +++ b/drivers/clocksource/arm_global_timer.c
> @@ -209,7 +209,7 @@ static void gt_resume(struct clocksource *cs)
>   
>   static struct clocksource gt_clocksource = {
>   	.name	= "arm_global_timer",
> -	.rating	= 300,
> +	.rating	= 150,
>   	.read	= gt_clocksource_read,
>   	.mask	= CLOCKSOURCE_MASK(64),
>   	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
> 


-- 
regards,
-grygorii