[PATCH v2 04/11] ARM: davinci: da8xx: add usb phy clocks
Sergei Shtylyov
sergei.shtylyov at cogentembedded.com
Thu Mar 17 05:12:08 PDT 2016
On 3/17/2016 5:26 AM, David Lechner wrote:
> Up to this point, the USB phy clock configuration was handled manually in
> the board files and in the usb drivers. This adds proper clocks so that
> the usb drivers can use clk_get and clk_enable and not have to worry about
> the details. Also, the related code is removed from the board files.
>
> Signed-off-by: David Lechner <david at lechnology.com>
[...]
> diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
> index 7187e7f..ee942b0 100644
> --- a/arch/arm/mach-davinci/da830.c
> +++ b/arch/arm/mach-davinci/da830.c
[...]
> @@ -346,6 +347,12 @@ static struct clk i2c1_clk = {
> .gpsc = 1,
> };
>
> +static struct clk usb_ref_clk = {
> + .name = "usb_ref_clk",
I'd leave out "_clk" for consistency.
[...]
> @@ -353,6 +360,139 @@ static struct clk usb11_clk = {
[...]
> +static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent)
> +{
> + u32 __iomem *cfgchip2;
> + u32 val;
> +
> + /*
> + * Can't use DA8XX_SYSCFG0_VIRT() here since this can be called before
> + * da8xx_syscfg0_base is initialized.
> + */
> + cfgchip2 = ioremap(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG, 4);
You should be able to use IO_ADDRESS(), no?
[...]
> @@ -420,7 +560,10 @@ static struct clk_lookup da830_clks[] = {
> CLK("davinci_mdio.0", "fck", &emac_clk),
> CLK(NULL, "gpio", &gpio_clk),
> CLK("i2c_davinci.2", NULL, &i2c1_clk),
> + CLK(NULL, "usb_ref_clk", &usb_ref_clk),
I'd leave out "_clk" agai.
> CLK(NULL, "usb11", &usb11_clk),
> + CLK(NULL, "usb20_phy", &usb20_phy_clk),
> + CLK(NULL, "usb11_phy", &usb11_phy_clk),
> CLK(NULL, "emif3", &emif3_clk),
> CLK(NULL, "arm", &arm_clk),
> CLK(NULL, "rmii", &rmii_clk),
> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
> index 8c8f31e..8089a82 100644
> --- a/arch/arm/mach-davinci/da850.c
> +++ b/arch/arm/mach-davinci/da850.c
Same comments on this file...
MBR, Sergei
More information about the linux-arm-kernel
mailing list