[PATCH] ARM: dts: r8a7790: Remove unnecessary clock-output-names properties
Simon Horman
horms+renesas at verge.net.au
Tue Mar 15 17:44:01 PDT 2016
* Fixed rate and fixed factor clocks do not require an
clock-output-names property.
* Since 1fae91ec99fb ("clk: shmobile: div6: Extract cpg_div6_register()")
Renesas div6 clocks do not require a clock-output-names property.
In the above cases there is only one clock output and its name is taken
from that of the clock node.
Accordingly, remove the unnecessary clock-output-names properties and
as necessary the nodes.
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 88 ++++++++++++++----------------------------
1 file changed, 28 insertions(+), 60 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index b71b3e20b6e4..634f7e05ba6b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1038,20 +1038,18 @@
ranges;
/* External root clock */
- extal_clk: extal_clk {
+ extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overriden by the board. */
clock-frequency = <0>;
- clock-output-names = "extal";
};
/* External PCIe clock - can be overridden by the board */
- pcie_bus_clk: pcie_bus_clk {
+ pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
- clock-output-names = "pcie_bus";
status = "disabled";
};
@@ -1063,19 +1061,16 @@
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
- clock-output-names = "audio_clk_a";
};
audio_clk_b: audio_clk_b {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
- clock-output-names = "audio_clk_b";
};
audio_clk_c: audio_clk_c {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
- clock-output-names = "audio_clk_c";
};
/* External SCIF clock */
@@ -1088,11 +1083,10 @@
};
/* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal_clk {
+ usb_extal_clk: usb_extal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
- clock-output-names = "usb_extal";
};
/* External CAN clock */
@@ -1101,7 +1095,6 @@
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
- clock-output-names = "can_clk";
status = "disabled";
};
@@ -1119,201 +1112,176 @@
};
/* Variable factor clocks */
- sd2_clk: sd2_clk at e6150078 {
+ sd2_clk: sd2 at e6150078 {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150078 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "sd2";
};
- sd3_clk: sd3_clk at e615026c {
+ sd3_clk: sd3 at e615026c {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "sd3";
};
- mmc0_clk: mmc0_clk at e6150240 {
+ mmc0_clk: mmc0 at e6150240 {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150240 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "mmc0";
};
- mmc1_clk: mmc1_clk at e6150244 {
+ mmc1_clk: mmc1 at e6150244 {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150244 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "mmc1";
};
- ssp_clk: ssp_clk at e6150248 {
+ ssp_clk: ssp at e6150248 {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150248 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "ssp";
};
- ssprs_clk: ssprs_clk at e615024c {
+ ssprs_clk: ssprs at e615024c {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe615024c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "ssprs";
};
/* Fixed factor clocks */
- pll1_div2_clk: pll1_div2_clk {
+ pll1_div2_clk: pll1_div2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
- clock-output-names = "pll1_div2";
};
- z2_clk: z2_clk {
+ z2_clk: z2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
- clock-output-names = "z2";
};
- zg_clk: zg_clk {
+ zg_clk: zg {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <3>;
clock-mult = <1>;
- clock-output-names = "zg";
};
- zx_clk: zx_clk {
+ zx_clk: zx {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <3>;
clock-mult = <1>;
- clock-output-names = "zx";
};
- zs_clk: zs_clk {
+ zs_clk: zs {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <6>;
clock-mult = <1>;
- clock-output-names = "zs";
};
- hp_clk: hp_clk {
+ hp_clk: hp {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <12>;
clock-mult = <1>;
- clock-output-names = "hp";
};
- i_clk: i_clk {
+ i_clk: i {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
- clock-output-names = "i";
};
- b_clk: b_clk {
+ b_clk: b {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <12>;
clock-mult = <1>;
- clock-output-names = "b";
};
- p_clk: p_clk {
+ p_clk: p {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <24>;
clock-mult = <1>;
- clock-output-names = "p";
};
- cl_clk: cl_clk {
+ cl_clk: cl {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <48>;
clock-mult = <1>;
- clock-output-names = "cl";
};
- m2_clk: m2_clk {
+ m2_clk: m2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <8>;
clock-mult = <1>;
- clock-output-names = "m2";
};
- imp_clk: imp_clk {
+ imp_clk: imp {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <4>;
clock-mult = <1>;
- clock-output-names = "imp";
};
- rclk_clk: rclk_clk {
+ rclk_clk: rclk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <(48 * 1024)>;
clock-mult = <1>;
- clock-output-names = "rclk";
};
- oscclk_clk: oscclk_clk {
+ oscclk_clk: oscclk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <(12 * 1024)>;
clock-mult = <1>;
- clock-output-names = "oscclk";
};
- zb3_clk: zb3_clk {
+ zb3_clk: zb3 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
#clock-cells = <0>;
clock-div = <4>;
clock-mult = <1>;
- clock-output-names = "zb3";
};
- zb3d2_clk: zb3d2_clk {
+ zb3d2_clk: zb3d2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
#clock-cells = <0>;
clock-div = <8>;
clock-mult = <1>;
- clock-output-names = "zb3d2";
};
- ddr_clk: ddr_clk {
+ ddr_clk: ddr {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
#clock-cells = <0>;
clock-div = <8>;
clock-mult = <1>;
- clock-output-names = "ddr";
};
- mp_clk: mp_clk {
+ mp_clk: mp {
compatible = "fixed-factor-clock";
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-div = <15>;
clock-mult = <1>;
- clock-output-names = "mp";
};
- cp_clk: cp_clk {
+ cp_clk: cp {
compatible = "fixed-factor-clock";
clocks = <&extal_clk>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
- clock-output-names = "cp";
};
/* Gate clocks */
--
2.1.4
More information about the linux-arm-kernel
mailing list