[PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
Gary Bisson
gary.bisson at boundarydevices.com
Tue Mar 15 07:04:25 PDT 2016
Based on i.MX6 SoloX with 1GB of RAM.
https://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Gary Bisson <gary.bisson at boundarydevices.com>
---
Changelog v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 732 +++++++++++++++++++++++++++++++
2 files changed, 733 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 279ec61..6a2bbc4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 0000000..9f3056c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,732 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+ aliases {
+ fb_lcd = &lcdif1;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <®_3p3v>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p8v: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can1_3v3: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_otg1_vbus: regulator at 4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator at 5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wlan>;
+ compatible = "regulator-fixed";
+ clocks = <&clks IMX6SX_CLK_CKO>;
+ clock-names = "slow";
+ reg = <5>;
+ regulator-name = "wlan-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6sx-nitrogen6sx-sgtl5000";
+ cpu-dai = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80 at 0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ read-only;
+ };
+ partition at C0000 {
+ label = "env";
+ reg = <0xC0000 0x2000>;
+ read-only;
+ };
+ partition at C2000 {
+ label = "Kernel";
+ reg = <0xC2000 0x11e000>;
+ };
+ partition at 1E0000 {
+ label = "M4";
+ reg = <0x1E0000 0x20000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy at 4 {
+ reg = <4>;
+ };
+
+ ethphy2: ethernet-phy at 5 {
+ reg = <5>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks IMX6SX_CLK_CKO2>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_1p8v>;
+ VDDD-supply = <®_1p8v>;
+ assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+ <&clks IMX6SX_CLK_CKO2>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+ assigned-clock-rates = <0>, <24000000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif1>;
+ lcd-supply = <®_3p3v>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ clock-frequency = <74160000>;
+ hactive = <1280>;
+ vactive = <720>;
+ hback-porch = <220>;
+ hfront-porch = <110>;
+ vback-porch = <20>;
+ vfront-porch = <5>;
+ hsync-len = <40>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-master";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ disable-over-current;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ cap-sdio-irq;
+ vqmmc-1-8-v;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcmf: bcrmf at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ wlcore: wlcore at 2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vqmmc-1-8-v;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6sx-nitrogen6sx {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0
+ MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0
+ MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0
+ MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0
+ >;
+ };
+
+ pinctrl_bt_rfkill: bt-rfkillgrp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0
+ MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0
+ MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0
+ MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0
+ MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0
+ MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0
+ MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0
+ MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0
+ MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0
+ MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0
+ MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0
+ MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0
+ /* Test points */
+ MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcdif1: lcdif1grp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ >;
+ };
+
+ pinctrl_lvds: lvdsgrp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0xb0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0
+ MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0
+ MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_reg_wlan: reg-wlangrp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0
+ MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0
+ MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0
+ MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1
+ MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071
+ >;
+ };
+ pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+ };
+};
--
2.7.0
More information about the linux-arm-kernel
mailing list