[PATCH v2] ARM: dts: artpec: update clock bindings in artpec6.dtsi

Lars Persson lars.persson at axis.com
Mon Mar 14 02:01:43 PDT 2016


The clock binding for the main clock controller was changed to an
indexed controller style binding on request of the clk
maintainers. This updates the dtsi to use the new bindings.

Signed-off-by: Lars Persson <larper at axis.com>
---
v2: Use numerical clock indexes to enable merge before the clock driver bindings
are in the tree.

 arch/arm/boot/dts/artpec6.dtsi | 99 +++++++++---------------------------------
 1 file changed, 20 insertions(+), 79 deletions(-)

diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 3043016..3fac4c4 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -91,96 +91,32 @@
 		clock-frequency = <50000000>;
 	};
 
-	/* PLL1 is used by CPU and some peripherals */
-	pll1_clk: pll1_clk at f8000000 {
+	eth_phy_ref_clk: eth_phy_ref_clk {
 		#clock-cells = <0>;
-		compatible = "axis,artpec6-pll1-clock";
-		reg = <0xf8000000 4>;
-		clocks = <&ext_clk>;
-	};
-
-	cpu_clk: cpu_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&pll1_clk>;
-		clock-output-names = "cpu_clk";
-	};
-
-	cpu_clkdiv2: cpu_clkdiv2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&cpu_clk>;
-	};
-
-	cpu_clkdiv4: cpu_clkdiv4 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <4>;
-		clock-mult = <1>;
-		clocks = <&cpu_clk>;
-	};
-
-	apb_pclk: apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <8>;
-		clock-mult = <1>;
-		clocks = <&cpu_clk>;
-		clock-output-names = "apb_pclk";
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
 	};
 
-	/* PLL2 is used by a number of peripherals, including UDL */
-	pll2: pll2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <24>;
+	clkctrl: clkctrl at 0xf8000000 {
+		#clock-cells = <1>;
+		compatible = "axis,artpec6-clkctrl";
+		reg = <0xf8000000 0x48>;
 		clocks = <&ext_clk>;
+		clock-names = "sys_refclk";
 	};
 
-	/* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */
-	pll2div2: pll2div2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&pll2>;
-	};
-
-	pll2div12: pll2div12 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <12>;
-		clock-mult = <1>;
-		clocks = <&pll2>;
-	};
-
-	pll2div24: pll2div24 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <24>;
-		clock-mult = <1>;
-		clocks = <&pll2>;
-		clock-output-names = "uart_clk";
-	};
-
-
 	gtimer at faf00200 {
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0xfaf00200 0x20>;
 		interrupts = <GIC_PPI 11 0xf01>;
-		clocks = <&cpu_clkdiv2>;
+		clocks = <&clkctrl 1>;
 	};
 
 	timer at faf00600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xfaf00600 0x20>;
 		interrupts = <GIC_PPI 13 0xf04>;
-		clocks = <&cpu_clkdiv2>;
+		clocks = <&clkctrl 1>;
 		status = "disabled";
 	};
 
@@ -220,7 +156,8 @@
 
 		ethernet: ethernet at f8010000 {
 			clock-names = "phy_ref_clk", "apb_pclk";
-			clocks = <&ext_clk>, <&apb_pclk>;
+			clocks = <&eth_phy_ref_clk>,
+				<&clkctrl 4>;
 			compatible = "snps,dwc-qos-ethernet-4.10";
 			interrupt-parent = <&intc>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -238,7 +175,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8036000 0x1000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pll2div24>, <&apb_pclk>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -246,7 +184,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8037000 0x1000>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pll2div24>, <&apb_pclk>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -254,7 +193,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8038000 0x1000>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pll2div24>, <&apb_pclk>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -262,7 +202,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8039000 0x1000>;
 			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pll2div24>, <&apb_pclk>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
-- 
2.1.4




More information about the linux-arm-kernel mailing list