[PATCH 0/6] arc_emac: fixes the emac issues oand cleanup emac drivers

Caesar Wang caesar.upstream at gmail.com
Sat Mar 12 20:04:41 PST 2016



在 2016年03月12日 02:46, Sergei Shtylyov 写道:
> Hello.
>
> On 03/11/2016 05:48 PM, Caesar Wang wrote:
>
> [...]
>
>>>> Hi Rob, David:
>>>> PATCH[1/6-2/6]: ====>
>>>> net: arc_emac: make the rockchip emac document more compatible
>>>> net: arc_emac: add phy-reset-* are optional for device tree
>>>>
>>>> The patches change the rockchip emac document for more compatible and
>>>> Add the phy-reset-* property for document.
>>>>
>>>> This patch adds the following property for arc_emac.
>>>>
>>>> phy-reset-* include the following:
>>>> 1) phy-reset-gpios:
>>>> The phy-reset-gpios is an optional property for arc emac device 
>>>> tree boot.
>>>> Change the binding document to match the driver code.
>>>>
>>>> 2) phy-reset-duration:
>>>> Different boards may require different phy reset duration. Add 
>>>> property
>>>> phy-reset-duration for device tree probe, so that the boards that need
>>>> a longer reset duration can specify it in their device tree.
>>>>
>>>> 3) phy-reset-active-high:
>>>> We need that for a custom hardware that needs the reverse reset 
>>>> sequence.
>>>
>>>    Why not infer this from the "phy-reset-gpios" prop?
>>
>> See:
>> https://patchwork.kernel.org/patch/8564511/
> >
>> phy-reset-active-high : If present then the reset sequence using the 
>> GPIO
>>   specified in the "phy-reset-gpios" property is reversed (H=reset 
>> state,
>>   L=operation state).
>
>    Referring to your own suggested bindings isn't an answer. If the 
> driver that you're copying from here (fec) had a reason to handle the 
> GPIO sense with the help of an extra prop (legacy code), it doesn't 
> mean your new driver needs to mimic this as well, AFAIU...

I know your suggestion is a fair request.

Oh, that copy from the 'freescale/fec_main.c' ....

So, The exist way was old and unwise in mainline. :(

wxt at nb:~/kernel/drivers/net/ethernet$ ag reset-gpios
micrel/ks8851.c
1427:    gpio = of_get_named_gpio_flags(spi->dev.of_node, "reset-gpios",

arc/emac_main.c
787:    phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
797:        dev_err(dev, "failed to get phy-reset-gpios: %d\n", err);

arc/emac_main.c~
784:    phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
794:        dev_err(dev, "failed to get phy-reset-gpios: %d\n", err);

davicom/dm9000.c
1451:    reset_gpios = of_get_named_gpio_flags(dev->of_node, 
"reset-gpios", 0,

freescale/fec_main.c
3206:    phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
3216:        dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", 
err);

cadence/macb.c
2958:        int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0);

...


Anyway, I will update it with your suggestion.

Thanks,


Caesar





>
>> Thanks,
>>
>> Caesar
>
> MBR, Sergei
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


-- 
Thanks,
Caesar




More information about the linux-arm-kernel mailing list