[PATCH 3/3] phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.
David Daney
ddaney.cavm at gmail.com
Fri Mar 11 08:47:02 PST 2016
From: David Daney <david.daney at cavium.com>
The Cavium Thunder SoCs have multiple MIDO buses that are part of a
single PCI device. To model this in the device tree we call the PCI
parent device a "cavium,thunder-8890-mdio-nexus", it has several
children, one for each MDIO bus.
The MDIO bus hardware is identical to that found in the OCTEON SoCs,
so we use that code for things that are not part of the PCI driver
probe/remove
Signed-off-by: David Daney <david.daney at cavium.com>
---
.../devicetree/bindings/net/cavium-mdio.txt | 61 +++++++-
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-thunder.c | 154 +++++++++++++++++++++
4 files changed, 225 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/phy/mdio-thunder.c
diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt
index 04cb749..020df08 100644
--- a/Documentation/devicetree/bindings/net/cavium-mdio.txt
+++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt
@@ -1,9 +1,12 @@
* System Management Interface (SMI) / MDIO
Properties:
-- compatible: "cavium,octeon-3860-mdio"
+- compatible: One of:
- Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+ "cavium,octeon-3860-mdio": Compatibility with all cn3XXX, cn5XXX
+ and cn6XXX SOCs.
+
+ "cavium,thunder-8890-mdio": Compatibility with all cn8XXX SOCs.
- reg: The base address of the MDIO bus controller register bank.
@@ -25,3 +28,57 @@ Example:
reg = <0>;
};
};
+
+
+* System Management Interface (SMI) / MDIO Nexus
+
+ Several mdio buses may be gathered as children of a single PCI
+ device, this PCI device is the nexus of the buses.
+
+Properties:
+
+- compatible: "cavium,thunder-8890-mdio-nexus";
+
+- reg: The PCI device and function numbers of the nexus device.
+
+- #address-cells: Must be <2>.
+
+- #size-cells: Must be <2>.
+
+- ranges: As needed for mapping of the MDIO bus device registers.
+
+- assigned-addresses: As needed for mapping of the MDIO bus device registers.
+
+Example:
+
+ mdio-nexus at 1,3 {
+ compatible = "cavium,thunder-8890-mdio-nexus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0b00 0 0 0 0>; /* DEVFN = 0x0b (1:3) */
+ assigned-addresses = <0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+ ranges = <0x87e0 0x05000000 0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+
+ mdio0 at 87e0,05003800 {
+ compatible = "cavium,thunder-8890-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x87e0 0x05003800 0x0 0x30>;
+
+ ethernet-phy at 0 {
+ ...
+ reg = <0>;
+ };
+ };
+ mdio0 at 87e0,05003880 {
+ compatible = "cavium,thunder-8890-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x87e0 0x05003880 0x0 0x30>;
+
+ ethernet-phy at 0 {
+ ...
+ reg = <0>;
+ };
+ };
+ };
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 40faec9..075a4cc 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -196,6 +196,17 @@ config MDIO_OCTEON
buses. It is required by the Octeon and ThunderX ethernet device
drivers on some systems.
+config MDIO_THUNDER
+ tristate "Support for MDIO buses on on ThunderX SOCs"
+ depends on 64BIT
+ depends on PCI
+ select MDIO_CAVIUM
+ help
+ This driver supports the MDIO interfaces found on Cavium
+ ThunderX SoCs when the MDIO bus device appears on as a PCI
+ device.
+
+
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 041b3d9..fcdbb92 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_AT803X_PHY) += at803x.o
diff --git a/drivers/net/phy/mdio-thunder.c b/drivers/net/phy/mdio-thunder.c
new file mode 100644
index 0000000..5646169
--- /dev/null
+++ b/drivers/net/phy/mdio-thunder.c
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009-2016 Cavium, Inc.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+
+#include "mdio-cavium.h"
+
+struct thunder_mdiobus_nexus {
+ void __iomem *bar0;
+ struct cavium_mdiobus *buses[4];
+};
+
+static int thunder_mdiobus_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device_node *node;
+ struct fwnode_handle *fwn;
+ struct thunder_mdiobus_nexus *nexus;
+ int err;
+ int i;
+
+ nexus = devm_kzalloc(&pdev->dev, sizeof(*nexus), GFP_KERNEL);
+ if (!nexus)
+ return -ENOMEM;
+
+ pci_set_drvdata(pdev, nexus);
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ pci_set_drvdata(pdev, NULL);
+ return err;
+ }
+
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ dev_err(&pdev->dev, "pci_request_regions failed\n");
+ goto err_disable_device;
+ }
+
+ nexus->bar0 = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!nexus->bar0) {
+ err = -ENOMEM;
+ goto err_release_regions;
+ }
+
+ i = 0;
+ device_for_each_child_node(&pdev->dev, fwn) {
+ struct resource r;
+ struct mii_bus *mii_bus;
+ struct cavium_mdiobus *bus;
+ union cvmx_smix_en smi_en;
+
+ /* If it is not an OF node we cannot handle it yet, so
+ * exit the loop.
+ */
+ node = to_of_node(fwn);
+ if (!node)
+ break;
+
+ err = of_address_to_resource(node, 0, &r);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Couldn't translate address for \"%s\"\n",
+ node->name);
+ break;
+ }
+
+ mii_bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*bus));
+ if (!mii_bus)
+ break;
+ bus = mii_bus->priv;
+ bus->mii_bus = mii_bus;
+
+ nexus->buses[i] = bus;
+ i++;
+
+ bus->register_base = (u64)nexus->bar0 +
+ r.start - pci_resource_start(pdev, 0);
+
+ smi_en.u64 = 0;
+ smi_en.s.en = 1;
+ oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
+ bus->mii_bus->name = KBUILD_MODNAME;
+ snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%llx", r.start);
+ bus->mii_bus->parent = &pdev->dev;
+ bus->mii_bus->read = cavium_mdiobus_read;
+ bus->mii_bus->write = cavium_mdiobus_write;
+
+ err = of_mdiobus_register(bus->mii_bus, node);
+ if (err)
+ dev_err(&pdev->dev, "of_mdiobus_register failed\n");
+
+ dev_info(&pdev->dev, "Added bus at %llx\n", r.start);
+ if (i >= ARRAY_SIZE(nexus->buses))
+ break;
+ }
+ return 0;
+
+err_release_regions:
+ pci_release_regions(pdev);
+
+err_disable_device:
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void thunder_mdiobus_pci_remove(struct pci_dev *pdev)
+{
+ int i;
+ struct thunder_mdiobus_nexus *nexus = pci_get_drvdata(pdev);
+
+ for (i = 0; i < ARRAY_SIZE(nexus->buses); i++) {
+ struct cavium_mdiobus *bus = nexus->buses[i];
+
+ if (!bus)
+ continue;
+
+ mdiobus_unregister(bus->mii_bus);
+ mdiobus_free(bus->mii_bus);
+ oct_mdio_writeq(0, bus->register_base + SMI_EN);
+ }
+ pci_set_drvdata(pdev, NULL);
+}
+
+static const struct pci_device_id thunder_mdiobus_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa02b) },
+ { 0, } /* End of table. */
+};
+MODULE_DEVICE_TABLE(pci, thunder_mdiobus_id_table);
+
+static struct pci_driver thunder_mdiobus_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = thunder_mdiobus_id_table,
+ .probe = thunder_mdiobus_pci_probe,
+ .remove = thunder_mdiobus_pci_remove,
+};
+
+module_pci_driver(thunder_mdiobus_driver);
+
+MODULE_DESCRIPTION("Cavium ThunderX MDIO bus driver");
+MODULE_LICENSE("GPL");
--
1.7.11.7
More information about the linux-arm-kernel
mailing list