[PATCH v2 1/2] ARM: dts: imx25-pinfunc: add all UART mux modes
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Wed Mar 9 11:44:33 PST 2016
Apart from a few additions this also contains two fixes where the daisy
chain input selection register was missing. Moreover dropped _MUX from
some pins for consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Changes since (implicit) v1, sent with
Message-Id: 1457435901-15886-1-git-send-email-u.kleine-koenig at pengutronix.de:
- really add all modes and some more droppings of _MUX
arch/arm/boot/dts/imx25-pinfunc.h | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 848ffa785b63..a050f0f2a57f 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -119,11 +119,11 @@
#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000
#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000
-#define MX25_PAD_ECB__UART5_TXD_MUX 0x060 0x270 0x000 0x13 0x000
+#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x13 0x000
#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000
#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000
-#define MX25_PAD_LBA__UART5_RXD_MUX 0x064 0x274 0x578 0x13 0x000
+#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x13 0x000
#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000
#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
@@ -237,17 +237,21 @@
#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000
#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
+#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x12 0x000
#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
+#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x12 0x000
#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000
+#define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x12 0x000
#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001
#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
+#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x12 0x000
#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
@@ -291,13 +295,13 @@
#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001
#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x11 0x001
#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x11 0x000
#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000
#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
@@ -360,7 +364,7 @@
#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000
#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x000 0x12 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x12 0x000
#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000
#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000
@@ -384,18 +388,22 @@
#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000
#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x10 0x000
+#define MX25_PAD_UART1_RXD__UART2_DTR 0x170 0x368 0x000 0x13 0x000
#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x15 0x000
#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x10 0x000
+#define MX25_PAD_UART1_TXD__UART2_DSR 0x174 0x36c 0x000 0x13 0x000
#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x15 0x000
#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000
#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001
#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x12 0x000
+#define MX25_PAD_UART1_RTS__UART2_DCD 0x178 0x370 0x000 0x13 0x000
#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000
#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000
#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x11 0x001
+#define MX25_PAD_UART1_CTS__UART2_RI 0x17c 0x374 0x000 0x13 0x001
#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x15 0x000
#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000
@@ -440,33 +448,39 @@
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__UART3_RXD 0x1a8 0x3a0 0x568 0x11 0x001
#define MX25_PAD_KPP_ROW0__UART1_DTR 0x1a8 0x3a0 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW1__UART3_TXD 0x1ac 0x3a4 0x000 0x11 0x000
+#define MX25_PAD_KPP_ROW1__UART1_DSR 0x1ac 0x3a4 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW2__UART3_RTS 0x1b0 0x3a8 0x000 0x11 0x000
#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002
#define MX25_PAD_KPP_ROW2__UART1_DCD 0x1b0 0x3a8 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW3__UART3_CTS 0x1b4 0x3ac 0x000 0x11 0x000
#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__UART1_RI 0x1b4 0x3ac 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000
#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX 0x1b8 0x3b0 0x570 0x11 0x001
+#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x11 0x001
#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000
#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000
#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX 0x1bc 0x3b4 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x11 0x000
#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000
#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000
#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x56c 0x11 0x001
#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x12 0x000
#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x15 0x000
@@ -560,6 +574,7 @@
#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000
#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000
#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x16 0x002
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
@@ -567,6 +582,7 @@
#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000
#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001
#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000
+#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x16 0x000
#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000
#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000
--
2.7.0
More information about the linux-arm-kernel
mailing list