[patch RESEND net] net: hns: fix the bug about mtu setting

Kejian Yan yankejian at huawei.com
Wed Mar 9 02:10:01 PST 2016


In chip V1, the maximum mtu value is 9600 for service ports and 1514 for
debug ports. And in chip V2, it is 9728 for service ports and 1514 for
debug ports. But it is always configurates as 9600 before this patch. This
patch will configurate the right mtu value.

Signed-off-by: Kejian Yan <yankejian at huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 7 ++++++-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h | 2 ++
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 3 +++
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h | 2 ++
 4 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 5ef0e96..65b8d91 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -467,8 +467,13 @@ int hns_mac_set_mtu(struct hns_mac_cb *mac_cb, u32 new_mtu)
 	struct mac_driver *drv = hns_mac_get_drv(mac_cb);
 	u32 buf_size = mac_cb->dsaf_dev->buf_size;
 	u32 new_frm = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+	u32 max_frm = AE_IS_VER1(mac_cb->dsaf_dev->dsaf_ver) ?
+			MAC_MAX_MTU : MAC_MAX_MTU_V2;
 
-	if ((new_mtu < MAC_MIN_MTU) || (new_frm > MAC_MAX_MTU) ||
+	if (mac_cb->mac_type == HNAE_PORT_DEBUG)
+		max_frm = MAC_MAX_MTU_DBG;
+
+	if ((new_mtu < MAC_MIN_MTU) || (new_frm > max_frm) ||
 	    (new_frm > HNS_RCB_RING_MAX_BD_PER_PKT * buf_size))
 		return -EINVAL;
 
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
index 0b05219..fc51e3d 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
@@ -26,7 +26,9 @@ struct dsaf_device;
 
 #define MAC_DEFAULT_MTU	(ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN + ETH_DATA_LEN)
 #define MAC_MAX_MTU		9600
+#define MAC_MAX_MTU_V2		9728
 #define MAC_MIN_MTU		68
+#define MAC_MAX_MTU_DBG         MAC_DEFAULT_MTU
 
 #define MAC_DEFAULT_PAUSE_TIME 0xff
 
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
index f302ef9..7a61c57 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
@@ -343,6 +343,9 @@ static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb)
 	if (!AE_IS_VER1(dsaf_dev->dsaf_ver)) {
 		hns_ppe_set_vlan_strip(ppe_cb, 0);
 
+		dsaf_write_dev(ppe_cb, PPE_CFG_MAX_FRAME_LEN_REG,
+			       HNS_PPEV2_MAX_FRAME_LEN);
+
 		/* set default RSS key in h/w */
 		hns_ppe_set_rss_key(ppe_cb, ppe_cb->rss_key);
 
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h
index 0f5cb69..e9c0ec2 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h
@@ -30,6 +30,8 @@
 #define HNS_PPEV2_RSS_KEY_SIZE 40 /* in bytes or 320 bits */
 #define HNS_PPEV2_RSS_KEY_NUM (HNS_PPEV2_RSS_KEY_SIZE / sizeof(u32))
 
+#define HNS_PPEV2_MAX_FRAME_LEN 0X980
+
 enum ppe_qid_mode {
 	PPE_QID_MODE0 = 0, /* fixed queue id mode */
 	PPE_QID_MODE1,	   /* switch:128VM non switch:6Port/4VM/4TC */
-- 
1.9.1




More information about the linux-arm-kernel mailing list