[PATCH V4 0/5] PCIe Xilinx generic driver for Microblaze and

[Bjorn Helgaas]

On Thu, Feb 11, 2016 at 09:58:06PM +0530, Bharat Kumar Gogada wrote:
> This patch series does modifications to pcie-xilinx.c, to support common
> driver on both Zynq and Microblaze architectures.
> Microblaze pci-common.c has been modified to support generic driver.
> 
> Bharat Kumar Gogada (5):
>   PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
>   PCI: xilinx: Removing struct hw_pci structure.
>   PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both
>      Zynq and Microblaze
>   PCI: xilinx: Updating Zynq PCI binding documentation with 
>     Microblaze node.
>   Microblaze: Modifying microblaze PCI subsytem to support  generic
>     Xilinx  AXI PCIe Host Bridge IP driver
> 
>  .../devicetree/bindings/pci/xilinx-pcie.txt        |  32 +++-
>  arch/microblaze/Kconfig                            |   3 +
>  arch/microblaze/pci/pci-common.c                   |  56 ++----
>  drivers/pci/host/Kconfig                           |   2 +-
>  drivers/pci/host/pcie-xilinx.c                     | 191 +++------------------
>  5 files changed, 66 insertions(+), 218 deletions(-)

I applied this series to my pci/host-xilinx branch for v4.6.

Michal, you only explicitly acked the last patch, but that only makes
sense if I apply the whole series, so I applied your ack to all the
patches.

Someday somebody should rework pci_fixup_irqs() so that doesn't have
to be arch-dependent.

I reworked the changelogs as below.

Bjorn


commit 01cf9d524ff0
Author: Bharat Kumar Gogada <bharat.kumar.gogada at xilinx.com>
Date:   Thu Feb 11 21:58:11 2016 +0530

    microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver
    
    Modify the Microblaze PCI subsystem to work with the generic
    drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq.
    
    [bhelgaas: changelog]
    Signed-off-by: Bharat Kumar Gogada <bharatku at xilinx.com>
    Signed-off-by: Ravi Kiran Gummaluri <rgummal at xilinx.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
    Acked-by: Michal Simek <michal.simek at xilinx.com>

commit e5d4b2006c97
Author: Bharat Kumar Gogada <bharat.kumar.gogada at xilinx.com>
Date:   Thu Feb 11 21:58:10 2016 +0530

    PCI: xilinx: Update Zynq binding with Microblaze node
    
    Update Zynq PCI binding documentation with Microblaze node.
    
    [bhelgaas: fix "microbalze_0_intc" typo]
    Signed-off-by: Bharat Kumar Gogada <bharatku at xilinx.com>
    Signed-off-by: Ravi Kiran Gummaluri <rgummal at xilinx.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
    Acked-by: Rob Herring <robh at kernel.org>
    Acked-by: Michal Simek <michal.simek at xilinx.com>

commit 2c51391d2559
Author: Bharat Kumar Gogada <bharat.kumar.gogada at xilinx.com>
Date:   Thu Feb 11 21:58:09 2016 +0530

    PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze
    
    The Xilinx AXI PCIe Host Bridge Soft IP driver was previously only
    supported on ARM (in particular, on ARCH_ZYNC), and pci_fixup_irqs() is
    available there.  But Microblaze will do IRQ fixup in pcibios_add_device(),
    so pci_fixup_irqs() is not available on Microblaze.
    
    Don't call pci_fixup_irqs() on Microblaze, so the driver can work on both
    Zynq and Microblaze Architectures.
    
    [bhelgaas: revise changelog to show similarity to bdb8a1844f31 ("PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM")]
    Signed-off-by: Bharat Kumar Gogada <bharatku at xilinx.com>
    Signed-off-by: Ravi Kiran Gummaluri <rgummal at xilinx.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
    Reviewed-by: Arnd Bergmann <arnd at arndb.de>
    Acked-by: Michal Simek <michal.simek at xilinx.com>

commit 4c01f3b089a0
Author: Bharat Kumar Gogada <bharat.kumar.gogada at xilinx.com>
Date:   Thu Feb 11 21:58:08 2016 +0530

    PCI: xilinx: Remove dependency on ARM-specific struct hw_pci
    
    The Xilinx PCIe host controller driver uses pci_common_init_dev(), which
    is ARM-specific and requires the ARM struct hw_pci.  The part of
    pci_common_init_dev() that is needed is limited and can be done here
    without using hw_pci.
    
    Create and scan the root bus directly without using the ARM
    pci_common_init_dev() interface.
    
    [bhelgaas: revise changelog to show similarity to 79953dd22c1d ("PCI: rcar: Remove dependency on ARM-specific struct hw_pci")]
    Signed-off-by: Bharat Kumar Gogada <bharatku at xilinx.com>
    Signed-off-by: Ravi Kiran Gummaluri <rgummal at xilinx.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
    Reviewed-by: Arnd Bergmann <arnd at arndb.de>
    Acked-by: Michal Simek <michal.simek at xilinx.com>

commit 0259882e342e
Author: Bharat Kumar Gogada <bharat.kumar.gogada at xilinx.com>
Date:   Thu Feb 11 21:58:07 2016 +0530

    PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT
    
    Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF
    DT parser.
    
    [bhelgaas: revise changelog to show similarity to 0021d22b73d6 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")]
    Signed-off-by: Bharat Kumar Gogada <bharatku at xilinx.com>
    Signed-off-by: Ravi Kiran Gummaluri <rgummal at xilinx.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
    Reviewed-by: Arnd Bergmann <arnd at arndb.de>
    Acked-by: Michal Simek <michal.simek at xilinx.com>