[PATCH] dmaengine: pl330: Fix some race conditions in residue calculation

Vinod Koul vinod.koul at intel.com
Tue Mar 8 06:15:51 PST 2016


On Tue, Mar 08, 2016 at 10:40:11AM +0000, Jon Medhurst (Tixy) wrote:
> On Tue, 2016-03-08 at 09:42 +0530, Vinod Koul wrote:
> > On Wed, Feb 24, 2016 at 01:14:34PM +0000, Jon Medhurst (Tixy) wrote:
> > > The residue calculation in pl330_tx_status doesn't handle transitional
> > > states that occur at the time one descriptor (A) is completed and the
> > > next (B) is started. Specifically, both A and B can simultaneously be in
> > > the BUSY state and at this time the thread's 'req_running' may (or may
> > > not) be -1.
> > 
> > you are under lock so descriptor state wont be update while we are it.
> > 
> > Also the query for residue is for "a descriptor" not whatever is the current
> > running descriptor...
> > 
> > > 
> > > To cope with this situation we change the code to ensure A is treated as
> > > complete and B as having not yet started. Prior to the change, the code
> > > would calculate a transferred byte count as if both A and B had
> > > completed.
> > 
> > You query for either A or B not both!
> 
> I've probably been using wrong/ambiguous terminology...
> 
> In my description I'm using 'descriptor' to refer to a 'struct
> dma_pl330_desc', I guess other people assume 'struct
> dma_async_tx_descriptor'?

Nope

> The situation I was debugging was audio playback, where ASoC ends up
> calling pl330_prep_dma_cyclic() with a period one quarter the length of
> the buffer it is using, so that results in four dma_pl330_desc
> 'descriptors' being created to cover that buffer. These later get
> submitted to a DMA channel (struct dma_pl330_chan) which has a list of
> these that it is processing (the 'work_list').
> 
> The residual calculation that currently exists in pl08x_dma_tx_status()
> is iterating this work_list and summing the length of currently
> transferring 'descriptor' with those later pending ones. I believe that
> is correct behaviour because these 'descriptors' (dma_pl330_desc) are
> all internal implementation details of the driver, and the dmaengine
> API's are dealing in units of 'dma_async_tx_descriptor' ?

Not really. If you look closely dma_pl330_desc contains
dma_async_tx_descriptor. A descriptor represents a tranasaction and is
certainly not internal detail of your driver

The reside is requested for "a descriptor". For example if you have prepared
two descriptors A and B and submitted them, then you can request status and
reside for A and you need to calculate that for A only and not take into
account status of B

> 
> If the current code is OK in this regard, it is definitely buggy because
> it doesn't cope with the situation when two dma_pl330_desc's are in the
> state 'BUSY' a, which I have seen occur when debugging this issue, had
> worked out can happen by analysing the code, and is acknowledged by the
> in-source comments for enum desc_status...
> 
> 	/*
> 	 * Sitting on the work_list and already submitted
> 	 * to the PL330 core. Not more than two descriptors
> 	 * of a channel can be BUSY at any time.
> 	 */
> 	BUSY,
> 
> In my problematic usecase I have userside code calling ALSA ioctls to
> poll the current audio playback position which results in
> pl08x_dma_tx_status() being called multiple times a second. After only a
> second or two the buggy situation gets hit, resulting in a
> miscalculation that ASoC interprets as a buffer underflow and so it
> stops the stream.
> 
> I spent several days debugging this, with enough ad hoc tests and
> printk's littered everywhere to be very confident as to how things are
> going wrong - what I'm not not totally confident of is how things should
> be properly fixed.

There maybe a problem but this patch and the fix dont explain that

> 
> This patch appears to fix the situation that I was hitting, but it
> really looks like there isn't any locking that prevent this polling use
> of pl08x_dma_tx_status() from happening concurrently with the irq
> handler reprogramming the hardware for the next dma_pl330_desc. I didn't
> attempt any fix for that for fear of introducing bugs in what looks like
> complex code, and because it's not a problem I saw happen in practice.
> 
> -- Tixy
> 
> > 
> > > 
> > > Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function")
> > > 
> > > Signed-off-by: Jon Medhurst <tixy at linaro.org>
> > > ---
> > > 
> > > I discovered this issue when trying to work out why audio stopped
> > > working on ARM's Juno platform and bisected it to commit aee4d1fac887.
> > > Whilst this patch seems to fix the problems I was seeing, I can't help
> > > but think there are more race conditions with this code. E.g. if the
> > > running descriptor changes under us, pl330_get_current_xferred_count
> > > can end up reading values from hardware that relate to a different
> > > descriptor. And if we're really unlucky, the reading of the 'val' and
> > > 'addr' values in pl330_get_current_xferred_count can come from different
> > > descriptors. I don't know if there is any locks we can use to prevent
> > > such races or if we need to try and detect when things have changed and
> > > redo/abort the residue calculation...
> > > 
> > >  drivers/dma/pl330.c | 24 ++++++++++++++++++++----
> > >  1 file changed, 20 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> > > index 17ee758..55e3c5f 100644
> > > --- a/drivers/dma/pl330.c
> > > +++ b/drivers/dma/pl330.c
> > > @@ -2240,6 +2240,7 @@ pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
> > >  	struct dma_pl330_desc *desc, *running = NULL;
> > >  	struct dma_pl330_chan *pch = to_pchan(chan);
> > >  	unsigned int transferred, residual = 0;
> > > +	bool first_busy;
> > >  
> > >  	ret = dma_cookie_status(chan, cookie, txstate);
> > >  
> > > @@ -2253,16 +2254,31 @@ pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
> > >  
> > >  	if (pch->thread->req_running != -1)
> > >  		running = pch->thread->req[pch->thread->req_running].desc;
> > > +	first_busy = true;
> > >  
> > >  	/* Check in pending list */
> > >  	list_for_each_entry(desc, &pch->work_list, node) {
> > >  		if (desc->status == DONE)
> > >  			transferred = desc->bytes_requested;
> > > -		else if (running && desc == running)
> > > -			transferred =
> > > -				pl330_get_current_xferred_count(pch, desc);
> > > -		else
> > > +		else if (desc->status == BUSY && first_busy) {
> > > +			first_busy = false;
> > > +			if (running && desc == running) {
> > > +				transferred =
> > > +					pl330_get_current_xferred_count(pch, desc);
> > > +			} else {
> > > +				/* BUSY but not running means it's just completed */
> > > +				transferred = desc->bytes_requested;
> > > +			}
> > > +		} else {
> > > +			/*
> > > +			 * Descriptor is either in PREP state queued for future
> > > +			 * transfer or it is the second BUSY descriptor we have
> > > +			 * seen. The latter case means it has just, or is about
> > > +			 * to be, started, so treat it as having not yet
> > > +			 * transferred any bytes, the same as PREP.
> > > +			 */
> > >  			transferred = 0;
> > > +		}
> > >  		residual += desc->bytes_requested - transferred;
> > >  		if (desc->txd.cookie == cookie) {
> > >  			switch (desc->status) {
> > > -- 
> > > 2.1.4
> > > 
> > > 
> > 
> 
> 

-- 
~Vinod



More information about the linux-arm-kernel mailing list