[PATCH v3 1/2] MFD: imx6sx: Add PCIe register definitions for iomuxc gpr

[Lee Jones]

On Thu, 25 Feb 2016, Christoph Fritz wrote:

> This patch adds macros to define masks and bits for imx6sx
> PCIe registers. This is based on a patch by Richard Zhu.
> 
> Signed-off-by: Christoph Fritz <chf.fritz at googlemail.com>
> ---
>  include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 5 +++++
>  1 file changed, 5 insertions(+)

I will change the non-conformant $SUBJECT line for you this time, but
please be more vigilant in the future.

Patch applied.

> diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> index 558a485..238c8db 100644
> --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> @@ -422,6 +422,7 @@
>  #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK		(0x1 << 26)
>  #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE	(0x1 << 26)
>  #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE	(0x0 << 26)
> +#define IMX6SX_GPR5_PCIE_BTNRST_RESET			BIT(19)
>  #define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK			(0x3 << 4)
>  #define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN		(0x0 << 4)
>  #define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD			(0x1 << 4)
> @@ -435,6 +436,10 @@
>  #define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS			(0x1 << 1)
>  #define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK			(0x1 << 1)
>  
> +#define IMX6SX_GPR12_PCIE_TEST_POWERDOWN		BIT(30)
> +#define IMX6SX_GPR12_PCIE_RX_EQ_MASK			(0x7 << 0)
> +#define IMX6SX_GPR12_PCIE_RX_EQ_2			(0x2 << 0)
> +
>  /* For imx6ul iomux gpr register field define */
>  #define IMX6UL_GPR1_ENET1_CLK_DIR		(0x1 << 17)
>  #define IMX6UL_GPR1_ENET2_CLK_DIR		(0x1 << 18)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog