[PATCH v5 6/9] dmaengine: rcar-dmac: group slave configuration

[Niklas Söderlund]

Group slave address and transfer size in own structs for source and
destination. This is in preparation for hooking up the dma-mapping API
to the slave addresses.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
---
 drivers/dma/sh/rcar-dmac.c | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 01cf82f..b3911fe 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -118,14 +118,22 @@ struct rcar_dmac_desc_page {
 	sizeof(struct rcar_dmac_xfer_chunk))
 
 /*
+ * struct rcar_dmac_chan_slave - Slave configuration
+ * @slave_addr: slave memory address
+ * @xfer_size: size (in bytes) of hardware transfers
+ */
+struct rcar_dmac_chan_slave {
+	phys_addr_t slave_addr;
+	unsigned int xfer_size;
+};
+
+/*
  * struct rcar_dmac_chan - R-Car Gen2 DMA Controller Channel
  * @chan: base DMA channel object
  * @iomem: channel I/O memory base
  * @index: index of this channel in the controller
- * @src_xfer_size: size (in bytes) of hardware transfers on the source side
- * @dst_xfer_size: size (in bytes) of hardware transfers on the destination side
- * @src_slave_addr: slave source memory address
- * @dst_slave_addr: slave destination memory address
+ * @src: slave memory address and size on the source side
+ * @dst: slave memory address and size on the destination side
  * @mid_rid: hardware MID/RID for the DMA client using this channel
  * @lock: protects the channel CHCR register and the desc members
  * @desc.free: list of free descriptors
@@ -142,10 +150,8 @@ struct rcar_dmac_chan {
 	void __iomem *iomem;
 	unsigned int index;
 
-	unsigned int src_xfer_size;
-	unsigned int dst_xfer_size;
-	phys_addr_t src_slave_addr;
-	phys_addr_t dst_slave_addr;
+	struct rcar_dmac_chan_slave src;
+	struct rcar_dmac_chan_slave dst;
 	int mid_rid;
 
 	spinlock_t lock;
@@ -793,13 +799,13 @@ static void rcar_dmac_chan_configure_desc(struct rcar_dmac_chan *chan,
 	case DMA_DEV_TO_MEM:
 		chcr = RCAR_DMACHCR_DM_INC | RCAR_DMACHCR_SM_FIXED
 		     | RCAR_DMACHCR_RS_DMARS;
-		xfer_size = chan->src_xfer_size;
+		xfer_size = chan->src.xfer_size;
 		break;
 
 	case DMA_MEM_TO_DEV:
 		chcr = RCAR_DMACHCR_DM_FIXED | RCAR_DMACHCR_SM_INC
 		     | RCAR_DMACHCR_RS_DMARS;
-		xfer_size = chan->dst_xfer_size;
+		xfer_size = chan->dst.xfer_size;
 		break;
 
 	case DMA_MEM_TO_MEM:
@@ -1038,7 +1044,7 @@ rcar_dmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 	}
 
 	dev_addr = dir == DMA_DEV_TO_MEM
-		 ? rchan->src_slave_addr : rchan->dst_slave_addr;
+		 ? rchan->src.slave_addr : rchan->dst.slave_addr;
 	return rcar_dmac_chan_prep_sg(rchan, sgl, sg_len, dev_addr,
 				      dir, flags, false);
 }
@@ -1093,7 +1099,7 @@ rcar_dmac_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr,
 	}
 
 	dev_addr = dir == DMA_DEV_TO_MEM
-		 ? rchan->src_slave_addr : rchan->dst_slave_addr;
+		 ? rchan->src.slave_addr : rchan->dst.slave_addr;
 	desc = rcar_dmac_chan_prep_sg(rchan, sgl, sg_len, dev_addr,
 				      dir, flags, true);
 
@@ -1110,10 +1116,10 @@ static int rcar_dmac_device_config(struct dma_chan *chan,
 	 * We could lock this, but you shouldn't be configuring the
 	 * channel, while using it...
 	 */
-	rchan->src_slave_addr = cfg->src_addr;
-	rchan->dst_slave_addr = cfg->dst_addr;
-	rchan->src_xfer_size = cfg->src_addr_width;
-	rchan->dst_xfer_size = cfg->dst_addr_width;
+	rchan->src.slave_addr = cfg->src_addr;
+	rchan->dst.slave_addr = cfg->dst_addr;
+	rchan->src.xfer_size = cfg->src_addr_width;
+	rchan->dst.xfer_size = cfg->dst_addr_width;
 
 	return 0;
 }
-- 
2.7.2