[PATCH V5 01/15] ACPI: MCFG: Move mmcfg_list management to drivers/acpi

[Bjorn Helgaas]

Hi Tomasz, Jayachandran, et al,

On Tue, Feb 16, 2016 at 02:53:31PM +0100, Tomasz Nowicki wrote:
> From: Jayachandran C <jchandra at broadcom.com>
> 
> Move pci_mmcfg_list handling to a drivers/acpi/pci_mcfg.c. This is
> to share the API and code with ARM64 later. The corresponding
> declarations are moved from asm/pci_x86.h to linux/pci-acpi.h
> 
> As a part of this we introduce three functions that can be
> implemented by the arch code: pci_mmconfig_map_resource() to map a
> mcfg entry, pci_mmconfig_unmap_resource to do the corresponding
> unmap and pci_mmconfig_enabled to see if the arch setup of
> mcfg entries was successful. We also provide weak implementations
> of these, which will be used from ARM64. On x86, we retain the
> old logic by providing platform specific implementation.
> 
> This patch is purely rearranging code, it should not have any
> impact on the logic of MCFG parsing or list handling.

I definitely want to figure out how to make this work well on ARM64.
I need to ponder this some more, so these are just some initial
thoughts.

My first impression is that (a) the x86 MCFG code is an unmitigated
disaster, and (b) we're trying a little too hard to make that mess
generic.  I think we might be better served if we came up with some
cleaner, more generic code that we can use for ARM64 today, and
migrate x86 toward that over time.

My concern is that if we elevate the current x86 code to be
"arch-independent", we will be perpetuating some interfaces and
designs that shouldn't be allowed to escape arch/x86.

Some of the code that moved to drivers/acpi/pci_mcfg.c is not really
ACPI-specific, and could potentially be used for non-ACPI bridges that
support ECAM.  I'd like to see that sort of code moved to a new file
like drivers/pci/ecam.c.

There's a little bit of overlap here with the ECAM code in
pci-host-generic.c.  I'm not sure whether or how to include that, but
it's a very good example of how simple this *should* be: probe the
host bridge, discover the ECAM region, request the region, ioremap it,
done.

> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> new file mode 100644
> index 0000000..ea84365
> --- /dev/null
> +++ b/drivers/acpi/pci_mcfg.c
> ...
> +int __weak pci_mmconfig_map_resource(struct device *dev,
> +	struct pci_mmcfg_region *mcfg)
> +{
> +	struct resource *tmp;
> +	void __iomem *vaddr;
> +
> +	tmp = insert_resource_conflict(&iomem_resource, &mcfg->res);
> +	if (tmp) {
> +		dev_warn(dev, "MMCONFIG %pR conflicts with %s %pR\n",
> +			&mcfg->res, tmp->name, tmp);
> +		return -EBUSY;
> +	}

I think this is a mistake in the x86 MCFG support that we should not
carry over to a generic implementation.  We should not use the MCFG
table for resource reservation because MCFG is not defined by the ACPI
spec and an OS need not include support for it.  The platform must
indicate in some other, more generic way, that ECAM space is reserved.
This probably means ECAM space should be declared in a PNP0C02 _CRS
method (see the PCI Firmware Spec r3.0, sec 4.1.2, note 2).

We might need some kind of x86-specific quirk that does this, or a
pcibios hook or something here; I just don't think it should be
generic.

> +int __init pci_mmconfig_parse_table(void)
> +{
> +	return acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
> +}

I don't like the fact that we parse the entire MCFG table at once
here.  I think we should look for the information we need when we are
claiming a PCI host bridge, e.g., in acpi_pci_root_add().  This might
not be a great fit for the way ACPI table management works, but I
think it's better to do things on-demand rather than just-in-case.

> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> index 89ab057..e9450ef 100644
> --- a/include/linux/pci-acpi.h
> +++ b/include/linux/pci-acpi.h
> @@ -106,6 +106,39 @@ extern const u8 pci_acpi_dsm_uuid[];
>  #define RESET_DELAY_DSM		0x08
>  #define FUNCTION_DELAY_DSM	0x09
>  
> +/* common API to maintain list of MCFG regions */
> +/* "PCI MMCONFIG %04x [bus %02x-%02x]" */
> +#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
> +
> +struct pci_mmcfg_region {
> +	struct list_head list;
> +	struct resource res;
> +	u64 address;
> +	char __iomem *virt;
> +	u16 segment;
> +	u8 start_bus;
> +	u8 end_bus;
> +	char name[PCI_MMCFG_RESOURCE_NAME_LEN];
> +};
> +
> +extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
> +			       phys_addr_t addr);
> +extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
> +
> +extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
> +extern struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
> +							int end, u64 addr);
> +extern int pci_mmconfig_map_resource(struct device *dev,
> +	struct pci_mmcfg_region *mcfg);
> +extern void pci_mmconfig_unmap_resource(struct pci_mmcfg_region *mcfg);
> +extern int pci_mmconfig_enabled(void);
> +extern int __init pci_mmconfig_parse_table(void);
> +
> +extern struct list_head pci_mmcfg_list;
> +
> +#define PCI_MMCFG_BUS_OFFSET(bus)      ((bus) << 20)
> +#define PCI_MMCFG_OFFSET(bus, devfn)   ((bus) << 20 | (devfn) << 12)
> +

With the exception of pci_mmconfig_parse_table(), nothing here is
ACPI-specific.  I'd like to see the PCI ECAM-related interfaces
(hopefully not these exact ones, but a more rational set) put in
something like include/linux/pci-ecam.h.

>  #else	/* CONFIG_ACPI */
>  static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
>  static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }

Bjorn