[PATCH 03/17] dt-bindings: Add PLX Technology RPS IRQ Controller bindings

Neil Armstrong narmstrong at baylibre.com
Thu Mar 3 03:39:56 PST 2016


Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 .../bindings/interrupt-controller/plxtech,rps-irq.txt   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt
new file mode 100644
index 0000000..db117a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt
@@ -0,0 +1,17 @@
+PLX Technology OXNAS SoCs Family RPS Interrupt Controller
+=========================================================
+
+Required properties:
+- compatible: Should be "plxtech,nas782x-rps"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Should be 1
+
+example:
+
+intc: interrupt-controller at 0 {
+	compatible = "plxtech,nas782x-rps";
+	interrupt-controller;
+	reg = <0 0x200>;
+	#interrupt-cells = <1>;
+};
-- 
1.9.1




More information about the linux-arm-kernel mailing list