[PATCH V4 17/23] acpi, mcfg: Add default PCI config accessors implementation and initial support for related quirks.
Lorenzo Pieralisi
lorenzo.pieralisi at arm.com
Wed Mar 2 02:42:44 PST 2016
On Mon, Feb 29, 2016 at 01:33:41PM +0530, Jayachandran Chandrashekaran Nair wrote:
> On Thu, Feb 4, 2016 at 10:58 PM, Tomasz Nowicki <tn at semihalf.com> wrote:
> > We use generic accessors from access.c by default. However, we already
> > know platforms that need special handling while accessing to PCI config
> > space. These platforms will need different accessors set matched against
> > platform ID, domain, bus touple. Therefore we are going to add (in future)
> > DECLARE_ACPI_MCFG_FIXUP which will register platform specific custom
> > accessors. For now, we let pci_mcfg_get_ops to take acpi_pci_root structure
> > as an arguments and left some space for quirk matching algorithm.
> >
> > Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
> > Tested-by: Duc Dang <dhdang at apm.com>
> > Tested-by: Dongdong Liu <liudongdong3 at huawei.com>
> > Tested-by: Hanjun Guo <hanjun.guo at linaro.org>
> > Tested-by: Graeme Gregory <graeme.gregory at linaro.org>
> > Tested-by: Sinan Kaya <okaya at codeaurora.org>
> > ---
> > drivers/acpi/mcfg.c | 30 ++++++++++++++++++++++++++++++
> > include/linux/pci-acpi.h | 8 ++++++++
> > 2 files changed, 38 insertions(+)
> >
> > diff --git a/drivers/acpi/mcfg.c b/drivers/acpi/mcfg.c
> > index dca4c4e..dfc2d14 100644
> > --- a/drivers/acpi/mcfg.c
> > +++ b/drivers/acpi/mcfg.c
> > @@ -34,6 +34,36 @@ int __weak raw_pci_write(unsigned int domain, unsigned int bus,
> > return PCIBIOS_DEVICE_NOT_FOUND;
> > }
> >
> > +void __iomem *
> > +pci_mcfg_dev_base(struct pci_bus *bus, unsigned int devfn, int offset)
> > +{
> > + struct pci_mmcfg_region *cfg;
> > +
> > + cfg = pci_mmconfig_lookup(pci_domain_nr(bus), bus->number);
>
> In the existing code, calls to pci_mmconfig_lookup() is done inside an
> rcu_read_lock/rcu_read_unlock pair. Any reason that is not required here?
>
> Also, you can avoid having to do the lookup every time by saving a cfg pointer
> see http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/396921.html
Yes, this is much better (and sysdata usage is self-contained, it does
not trickle into other bits of the kernel - ie arch code), it should be
integrated in the final version of the patchset.
> > + if (cfg && cfg->virt)
> > + return cfg->virt +
> > + (PCI_MMCFG_BUS_OFFSET(bus->number) | (devfn << 12)) +
> > + offset;
>
> PCI_MMCFG_OFFSET(bus->number, devfn) would be better
Ditto.
Thanks,
Lorenzo
>
> > + return NULL;
> > +}
> > +
> > +/* Default generic PCI config accessors */
> > +static struct pci_ops default_pci_mcfg_ops = {
> > + .map_bus = pci_mcfg_dev_base,
> > + .read = pci_generic_config_read,
> > + .write = pci_generic_config_write,
> > +};
> > +
> > +struct pci_ops *pci_mcfg_get_ops(struct acpi_pci_root *root)
> > +{
> > + /*
> > + * TODO: Match against platform specific quirks and return
> > + * corresponding PCI config space accessor set.
> > + */
> > +
> > + return &default_pci_mcfg_ops;
> > +}
>
> Is it necessary to make these non-static, even in the next patch, the
> functions are only used from this file.
>
> > +
> > int __init acpi_parse_mcfg(struct acpi_table_header *header)
> > {
> > struct acpi_table_mcfg *mcfg;
> > diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> > index 65b91f3..c974586 100644
> > --- a/include/linux/pci-acpi.h
> > +++ b/include/linux/pci-acpi.h
> > @@ -83,10 +83,18 @@ void acpi_pci_remove_bus(struct pci_bus *bus);
> > #ifdef CONFIG_PCI_MMCONFIG
> > int pci_mmcfg_setup_map(struct acpi_pci_root_info *ci);
> > void pci_mmcfg_teardown_map(struct acpi_pci_root_info *ci);
> > +struct pci_ops *pci_mcfg_get_ops(struct acpi_pci_root *root);
> > +void __iomem *
> > +pci_mcfg_dev_base(struct pci_bus *bus, unsigned int devfn, int offset);
> > #else
> > static inline int pci_mmcfg_setup_map(struct acpi_pci_root_info *ci)
> > { return 0; }
> > static inline void pci_mmcfg_teardown_map(struct acpi_pci_root_info *ci) { }
> > +static inline struct pci_ops *pci_mcfg_get_ops(struct acpi_pci_root *root)
> > +{ return NULL; }
> > +static inline void __iomem *
> > +pci_mcfg_dev_base(struct pci_bus *bus, unsigned int devfn, int offset)
> > +{ return NULL; }
> > #endif
> > #ifdef CONFIG_ACPI_PCI_SLOT
>
> JC.
>
More information about the linux-arm-kernel
mailing list