[RFC v3 12/12] ARM64: dts: Define CPU power domain for MSM8916

[Lina Iyer]

Define power domain and the power states for the domain as defined by
the PSCI firmware. The 8916 firmware supports OS initiated method of
powering off the CPU clusters.

Cc: <devicetree at vger.kernel.org>
Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index b7839a8..62dade8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -63,6 +63,7 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		CPU1: cpu at 1 {
@@ -71,6 +72,7 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		CPU2: cpu at 2 {
@@ -79,6 +81,7 @@
 			reg = <0x2>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		CPU3: cpu at 3 {
@@ -87,6 +90,7 @@
 			reg = <0x3>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		idle-states {
@@ -101,6 +105,27 @@
 		};
 	};
 
+	CPU_PD: cpu-pd at 0 {
+		#power-domain-cells = <0>;
+		power-states = <&CLUSTER_RET>, <&CLUSTER_PWR_DWN>;
+	};
+
+	pd-power-states {
+		CLUSTER_RET: power-state at 1 {
+			state-param = <0x1000010>;
+			entry-latency-us = <500>;
+			exit-latency-us = <500>;
+			residency-us = <2000>;
+		 };
+
+		CLUSTER_PWR_DWN: power-state at 2 {
+			state-param = <0x1000030>;
+			entry-latency-us = <2000>;
+			exit-latency-us = <2000>;
+			residency-us = <6000>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
-- 
2.1.4