[PATCH] arm64: dts: r8a7795: Add CAN FD support

[Sergei Shtylyov]

Hello.

On 3/1/2016 1:04 PM, Ramesh Shanmugasundaram wrote:

> Adds CAN FD controller node for r8a7795.
>
> Note: CAN FD controller register base address specified in R-Car Gen3
> Hardware User Manual v0.5E is incorrect. The correct address is:
>
> CAN FD - 0xe66c0000
>
> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram at bp.renesas.com>
> ---
> Hi All,
>
>     This patch is based on linux-next (tag:next-20160225) with the following
>     patches applied on top.
>
>     [PATCH v2] arm64: dts: r8a7795: Add CAN external clock support
>     [PATCH] arm64: dts: r8a7795: Add CAN support
>
>     The respective CAN subsystem changes are submitted separately here (https://www.mail-archive.com/linux-renesas-soc@vger.kernel.org/msg01388.html)
>
> Thanks,
> Ramesh
> ---
>   arch/arm64/boot/dts/renesas/r8a7795.dtsi | 24 ++++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> index a88f8d8..5049ba6 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -553,6 +553,30 @@
>   			status = "disabled";
>   		};
>
> +		canfd: canfd at e66c0000 {

    The node name should still be "can at e66c0000", I think.

MBR, Sergei