[PATCH v6 09/11] drm/hisilicon: Add support for external bridge

Xinliang Liu xinliang.liu at linaro.org
Tue Mar 1 02:34:59 PST 2016


On 1 March 2016 at 02:53, Archit Taneja <architt at codeaurora.org> wrote:
>
>
> On 2/26/2016 2:10 PM, Xinliang Liu wrote:
>>
>> Add support for external HDMI bridge.
>>
>> v6: None.
>> v5: None.
>> v4: None.
>> v3:
>> - Fix a typo: s/exteranl/external.
>> v2:
>> - Remove abtraction layer.
>>
>
> Reviewed-by: Archit Taneja <architt at codeaurora.org>

Thanks :-)

Best,
-xinliang

>
>
>> Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
>> ---
>>   drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c | 52
>> ++++++++++++++++++++++++++++
>>   1 file changed, 52 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
>> b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
>> index f15798b61451..c2c406446513 100644
>> --- a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
>> +++ b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
>> @@ -79,6 +79,7 @@ struct dsi_hw_ctx {
>>
>>   struct dw_dsi {
>>         struct drm_encoder encoder;
>> +       struct drm_bridge *bridge;
>>         struct mipi_dsi_host host;
>>         struct drm_display_mode cur_mode;
>>         struct dsi_hw_ctx *ctx;
>> @@ -688,6 +689,25 @@ static int dsi_host_init(struct device *dev, struct
>> dw_dsi *dsi)
>>         return 0;
>>   }
>>
>> +static int dsi_bridge_init(struct drm_device *dev, struct dw_dsi *dsi)
>> +{
>> +       struct drm_encoder *encoder = &dsi->encoder;
>> +       struct drm_bridge *bridge = dsi->bridge;
>> +       int ret;
>> +
>> +       /* associate the bridge to dsi encoder */
>> +       encoder->bridge = bridge;
>> +       bridge->encoder = encoder;
>> +
>> +       ret = drm_bridge_attach(dev, bridge);
>> +       if (ret) {
>> +               DRM_ERROR("failed to attach external bridge\n");
>> +               return ret;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>>   static int dsi_bind(struct device *dev, struct device *master, void
>> *data)
>>   {
>>         struct dsi_data *ddata = dev_get_drvdata(dev);
>> @@ -703,6 +723,10 @@ static int dsi_bind(struct device *dev, struct device
>> *master, void *data)
>>         if (ret)
>>                 return ret;
>>
>> +       ret = dsi_bridge_init(drm_dev, dsi);
>> +       if (ret)
>> +               return ret;
>> +
>>         return 0;
>>   }
>>
>> @@ -719,8 +743,36 @@ static const struct component_ops dsi_ops = {
>>   static int dsi_parse_dt(struct platform_device *pdev, struct dw_dsi
>> *dsi)
>>   {
>>         struct dsi_hw_ctx *ctx = dsi->ctx;
>> +       struct device_node *np = pdev->dev.of_node;
>> +       struct device_node *endpoint, *bridge_node;
>> +       struct drm_bridge *bridge;
>>         struct resource *res;
>>
>> +       /*
>> +        * Get the endpoint node. In our case, dsi has one output port1
>> +        * to which the external HDMI bridge is connected.
>> +        */
>> +       endpoint = of_graph_get_endpoint_by_regs(np, 1, -1);
>> +       if (!endpoint) {
>> +               DRM_ERROR("no valid endpoint node\n");
>> +               return -ENODEV;
>> +       }
>> +       of_node_put(endpoint);
>> +
>> +       bridge_node = of_graph_get_remote_port_parent(endpoint);
>> +       if (!bridge_node) {
>> +               DRM_ERROR("no valid bridge node\n");
>> +               return -ENODEV;
>> +       }
>> +       of_node_put(bridge_node);
>> +
>> +       bridge = of_drm_find_bridge(bridge_node);
>> +       if (!bridge) {
>> +               DRM_INFO("wait for external HDMI bridge driver.\n");
>> +               return -EPROBE_DEFER;
>> +       }
>> +       dsi->bridge = bridge;
>> +
>>         ctx->pclk = devm_clk_get(&pdev->dev, "pclk");
>>         if (IS_ERR(ctx->pclk)) {
>>                 DRM_ERROR("failed to get pclk clock\n");
>>
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project



More information about the linux-arm-kernel mailing list