[PATCH v6 04/11] drm/hisilicon: Add plane driver for ADE
Xinliang Liu
xinliang.liu at linaro.org
Tue Mar 1 01:45:19 PST 2016
Hi,
On 1 March 2016 at 02:48, Archit Taneja <architt at codeaurora.org> wrote:
>
>
> On 2/26/2016 2:10 PM, Xinliang Liu wrote:
>>
>> Add plane funcs and helper funcs for ADE.
>>
>> v6: None.
>> v5: None.
>> v4: None.
>> v3:
>> - A few cleanup.
>> v2:
>> - Remove abtraction layer.
>>
>> Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
>> ---
>> drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 535
>> +++++++++++++++++++++++-
>> 1 file changed, 534 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>> b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>> index bb93616dcf3d..aa2cf75cab39 100644
>> --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>> @@ -27,13 +27,23 @@
>> #include <drm/drm_crtc_helper.h>
>> #include <drm/drm_atomic.h>
>> #include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_plane_helper.h>
>> +#include <drm/drm_gem_cma_helper.h>
>> +#include <drm/drm_fb_cma_helper.h>
>>
>> #include "kirin_drm_drv.h"
>> #include "kirin_ade_reg.h"
>>
>> +#define PRIMARY_CH ADE_CH1 /* primary plane */
>> +#define OUT_OVLY ADE_OVLY2 /* output overlay compositor */
>
>
> Could you briefly explain this overlay/channel mapping? It looks like
> it's something that is hard coded at the moment.
>
> Do channels map to planes, and OVLs map to crtcs?
>
Yes, channels map to planes.
But not sure if OVLs is map to crtcs. IMO, crtc mean an individual
display pipe line.
Here, OVLs are the overlay compositor. There three OVLs in this chip,
we choose OVLY2 for online display now.
Also see the Hardware Detail part of cover patch.
>
>> +#define ADE_DEBUG 1
>> +
>> #define to_ade_crtc(crtc) \
>> container_of(crtc, struct ade_crtc, base)
>>
>> +#define to_ade_plane(plane) \
>> + container_of(plane, struct ade_plane, base)
>> +
>> struct ade_hw_ctx {
>> void __iomem *base;
>> struct regmap *noc_regmap;
>> @@ -52,11 +62,76 @@ struct ade_crtc {
>> u32 out_format;
>> };
>>
>> +struct ade_plane {
>> + struct drm_plane base;
>> + void *ctx;
>> + u8 ch; /* channel */
>> +};
>> +
>> struct ade_data {
>> struct ade_crtc acrtc;
>> + struct ade_plane aplane[ADE_CH_NUM];
>> struct ade_hw_ctx ctx;
>> };
>>
>> +/* ade-format info: */
>> +struct ade_format {
>> + u32 pixel_format;
>> + enum ade_fb_format ade_format;
>> +};
>> +
>> +static const struct ade_format ade_formats[] = {
>> + /* 16bpp RGB: */
>> + { DRM_FORMAT_RGB565, ADE_RGB_565 },
>> + { DRM_FORMAT_BGR565, ADE_BGR_565 },
>> + /* 24bpp RGB: */
>> + { DRM_FORMAT_RGB888, ADE_RGB_888 },
>> + { DRM_FORMAT_BGR888, ADE_BGR_888 },
>> + /* 32bpp [A]RGB: */
>> + { DRM_FORMAT_XRGB8888, ADE_XRGB_8888 },
>> + { DRM_FORMAT_XBGR8888, ADE_XBGR_8888 },
>> + { DRM_FORMAT_RGBA8888, ADE_RGBA_8888 },
>> + { DRM_FORMAT_BGRA8888, ADE_BGRA_8888 },
>> + { DRM_FORMAT_ARGB8888, ADE_ARGB_8888 },
>> + { DRM_FORMAT_ABGR8888, ADE_ABGR_8888 },
>> +};
>> +
>> +static const u32 channel_formats1[] = {
>> + /* channel 1,2,3,4 */
>> + DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_RGB888,
>> + DRM_FORMAT_BGR888, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
>> + DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_ARGB8888,
>> + DRM_FORMAT_ABGR8888
>> +};
>> +
>> +u32 ade_get_channel_formats(u8 ch, const u32 **formats)
>> +{
>> + switch (ch) {
>> + case ADE_CH1:
>> + *formats = channel_formats1;
>> + return ARRAY_SIZE(channel_formats1);
>> + default:
>> + DRM_ERROR("no this channel %d\n", ch);
>> + *formats = NULL;
>> + return 0;
>> + }
>> +}
>> +
>> +/* convert from fourcc format to ade format */
>> +static u32 ade_get_format(u32 pixel_format)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(ade_formats); i++)
>> + if (ade_formats[i].pixel_format == pixel_format)
>> + return ade_formats[i].ade_format;
>> +
>> + /* not found */
>> + DRM_ERROR("Not found pixel format!!fourcc_format= %d\n",
>> + pixel_format);
>> + return ADE_FORMAT_NOT_SUPPORT;
>> +}
>> +
>> static void ade_update_reload_bit(void __iomem *base, u32 bit_num, u32
>> val)
>> {
>> u32 bit_ofst, reg_num;
>> @@ -89,7 +164,7 @@ static void ade_init(struct ade_hw_ctx *ctx)
>> /* clear overlay */
>> writel(0, base + ADE_OVLY1_TRANS_CFG);
>> writel(0, base + ADE_OVLY_CTL);
>> - writel(0, base + ADE_OVLYX_CTL(ADE_OVLY2));
>> + writel(0, base + ADE_OVLYX_CTL(OUT_OVLY));
>> /* clear reset and reload regs */
>> writel(MASK(32), base + ADE_SOFT_RST_SEL(0));
>> writel(MASK(32), base + ADE_SOFT_RST_SEL(1));
>> @@ -147,6 +222,10 @@ static void ade_ldi_set_mode(struct ade_crtc *acrtc,
>> mode->clock * 1000, ret);
>> adj_mode->clock = clk_get_rate(ctx->ade_pix_clk) / 1000;
>>
>> + /* set overlay compositor output size */
>> + writel(((width - 1) << OUTPUT_XSIZE_OFST) | (height - 1),
>> + base + ADE_OVLY_OUTPUT_SIZE(OUT_OVLY));
>> +
>> /* ctran6 setting */
>> writel(CTRAN_BYPASS_ON, base + ADE_CTRAN_DIS(ADE_CTRAN6));
>> /* the configured value is actual value - 1 */
>> @@ -219,6 +298,10 @@ static void ade_display_enable(struct ade_crtc
>> *acrtc)
>> void __iomem *base = ctx->base;
>> u32 out_fmt = acrtc->out_format;
>>
>> + /* enable output overlay compositor */
>> + writel(ADE_ENABLE, base + ADE_OVLYX_CTL(OUT_OVLY));
>> + ade_update_reload_bit(base, OVLY_OFST + OUT_OVLY, 0);
>> +
>> /* display source setting */
>> writel(DISP_SRC_OVLY2, base + ADE_DISP_SRC_CFG);
>>
>> @@ -232,6 +315,97 @@ static void ade_display_enable(struct ade_crtc
>> *acrtc)
>> writel(DSI_PCLK_ON, base + LDI_HDMI_DSI_GT);
>> }
>>
>> +#if ADE_DEBUG
>> +static void ade_rdma_dump_regs(void __iomem *base, u32 ch)
>> +{
>> + u32 reg_ctrl, reg_addr, reg_size, reg_stride, reg_space, reg_en;
>> + u32 val;
>> +
>> + reg_ctrl = RD_CH_CTRL(ch);
>> + reg_addr = RD_CH_ADDR(ch);
>> + reg_size = RD_CH_SIZE(ch);
>> + reg_stride = RD_CH_STRIDE(ch);
>> + reg_space = RD_CH_SPACE(ch);
>> + reg_en = RD_CH_EN(ch);
>> +
>> + val = ade_read_reload_bit(base, RDMA_OFST + ch);
>> + DRM_DEBUG_DRIVER("[rdma%d]: reload(%d)\n", ch + 1, val);
>> + val = readl(base + reg_ctrl);
>> + DRM_DEBUG_DRIVER("[rdma%d]: reg_ctrl(0x%08x)\n", ch + 1, val);
>> + val = readl(base + reg_addr);
>> + DRM_DEBUG_DRIVER("[rdma%d]: reg_addr(0x%08x)\n", ch + 1, val);
>> + val = readl(base + reg_size);
>> + DRM_DEBUG_DRIVER("[rdma%d]: reg_size(0x%08x)\n", ch + 1, val);
>> + val = readl(base + reg_stride);
>> + DRM_DEBUG_DRIVER("[rdma%d]: reg_stride(0x%08x)\n", ch + 1, val);
>> + val = readl(base + reg_space);
>> + DRM_DEBUG_DRIVER("[rdma%d]: reg_space(0x%08x)\n", ch + 1, val);
>> + val = readl(base + reg_en);
>> + DRM_DEBUG_DRIVER("[rdma%d]: reg_en(0x%08x)\n", ch + 1, val);
>> +}
>> +
>> +static void ade_clip_dump_regs(void __iomem *base, u32 ch)
>> +{
>> + u32 val;
>> +
>> + val = ade_read_reload_bit(base, CLIP_OFST + ch);
>> + DRM_DEBUG_DRIVER("[clip%d]: reload(%d)\n", ch + 1, val);
>> + val = readl(base + ADE_CLIP_DISABLE(ch));
>> + DRM_DEBUG_DRIVER("[clip%d]: reg_clip_disable(0x%08x)\n", ch + 1,
>> val);
>> + val = readl(base + ADE_CLIP_SIZE0(ch));
>> + DRM_DEBUG_DRIVER("[clip%d]: reg_clip_size0(0x%08x)\n", ch + 1,
>> val);
>> + val = readl(base + ADE_CLIP_SIZE1(ch));
>> + DRM_DEBUG_DRIVER("[clip%d]: reg_clip_size1(0x%08x)\n", ch + 1,
>> val);
>> +}
>> +
>> +static void ade_compositor_routing_dump_regs(void __iomem *base, u32 ch)
>> +{
>> + u8 ovly_ch = 0; /* TODO: Only primary plane now */
>> + u32 val;
>> +
>> + val = readl(base + ADE_OVLY_CH_XY0(ovly_ch));
>> + DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_xy0(0x%08x)\n", ovly_ch,
>> val);
>> + val = readl(base + ADE_OVLY_CH_XY1(ovly_ch));
>> + DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_xy1(0x%08x)\n", ovly_ch,
>> val);
>> + val = readl(base + ADE_OVLY_CH_CTL(ovly_ch));
>> + DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_ctl(0x%08x)\n", ovly_ch,
>> val);
>> +}
>> +
>> +static void ade_dump_overlay_compositor_regs(void __iomem *base, u32
>> comp)
>> +{
>> + u32 val;
>> +
>> + val = ade_read_reload_bit(base, OVLY_OFST + comp);
>> + DRM_DEBUG_DRIVER("[overlay%d]: reload(%d)\n", comp + 1, val);
>> + writel(ADE_ENABLE, base + ADE_OVLYX_CTL(comp));
>> + DRM_DEBUG_DRIVER("[overlay%d]: reg_ctl(0x%08x)\n", comp + 1, val);
>> + val = readl(base + ADE_OVLY_CTL);
>> + DRM_DEBUG_DRIVER("ovly_ctl(0x%08x)\n", val);
>> +}
>> +
>> +static void ade_dump_regs(void __iomem *base)
>> +{
>> + u32 i;
>> +
>> + /* dump channel regs */
>> + for (i = 0; i < ADE_CH_NUM; i++) {
>> + /* dump rdma regs */
>> + ade_rdma_dump_regs(base, i);
>> +
>> + /* dump clip regs */
>> + ade_clip_dump_regs(base, i);
>> +
>> + /* dump compositor routing regs */
>> + ade_compositor_routing_dump_regs(base, i);
>> + }
>> +
>> + /* dump overlay compositor regs */
>> + ade_dump_overlay_compositor_regs(base, OUT_OVLY);
>> +}
>> +#else
>> +static void ade_dump_regs(void __iomem *base) { }
>> +#endif
>> +
>> static void ade_crtc_enable(struct drm_crtc *crtc)
>> {
>> struct ade_crtc *acrtc = to_ade_crtc(crtc);
>> @@ -249,6 +423,7 @@ static void ade_crtc_enable(struct drm_crtc *crtc)
>>
>> ade_set_medianoc_qos(acrtc);
>> ade_display_enable(acrtc);
>> + ade_dump_regs(ctx->base);
>> acrtc->enable = true;
>> }
>>
>> @@ -303,6 +478,7 @@ static void ade_crtc_atomic_flush(struct drm_crtc
>> *crtc,
>>
>> /* only crtc is eanbled regs take effect */
>> if (acrtc->enable) {
>> + ade_dump_regs(base);
>> /* flush ade regitsters */
>> writel(ADE_ENABLE, base + ADE_EN);
>> }
>> @@ -359,6 +535,338 @@ static int ade_crtc_init(struct drm_device *dev,
>> struct drm_crtc *crtc,
>> return 0;
>> }
>>
>> +static void ade_rdma_set(void __iomem *base, struct drm_framebuffer *fb,
>> + u32 ch, u32 y, u32 in_h, u32 fmt)
>> +{
>> + struct drm_gem_cma_object *obj = drm_fb_cma_get_gem_obj(fb, 0);
>> + u32 reg_ctrl, reg_addr, reg_size, reg_stride, reg_space, reg_en;
>> + u32 stride = fb->pitches[0];
>> + u32 addr = (u32)obj->paddr + y * stride;
>> +
>> + DRM_DEBUG_DRIVER("rdma%d: (y=%d, height=%d), stride=%d,
>> paddr=0x%x\n",
>> + ch + 1, y, in_h, stride, (u32)obj->paddr);
>> + DRM_DEBUG_DRIVER("addr=0x%x, fb:%dx%d, pixel_format=%d(%s)\n",
>> + addr, fb->width, fb->height, fmt,
>> + drm_get_format_name(fb->pixel_format));
>> +
>> + /* get reg offset */
>> + reg_ctrl = RD_CH_CTRL(ch);
>> + reg_addr = RD_CH_ADDR(ch);
>> + reg_size = RD_CH_SIZE(ch);
>> + reg_stride = RD_CH_STRIDE(ch);
>> + reg_space = RD_CH_SPACE(ch);
>> + reg_en = RD_CH_EN(ch);
>> +
>> + /*
>> + * TODO: set rotation
>> + */
>> + writel((fmt << 16) & 0x1f0000, base + reg_ctrl);
>> + writel(addr, base + reg_addr);
>> + writel((in_h << 16) | stride, base + reg_size);
>> + writel(stride, base + reg_stride);
>> + writel(in_h * stride, base + reg_space);
>> + writel(ADE_ENABLE, base + reg_en);
>> + ade_update_reload_bit(base, RDMA_OFST + ch, 0);
>> +}
>> +
>> +static void ade_rdma_disable(void __iomem *base, u32 ch)
>> +{
>> + u32 reg_en;
>> +
>> + /* get reg offset */
>> + reg_en = RD_CH_EN(ch);
>> + writel(0, base + reg_en);
>> + ade_update_reload_bit(base, RDMA_OFST + ch, 1);
>> +}
>> +
>> +static void ade_clip_set(void __iomem *base, u32 ch, u32 fb_w, u32 x,
>> + u32 in_w, u32 in_h)
>> +{
>> + u32 disable_val;
>> + u32 clip_left;
>> + u32 clip_right;
>> +
>> + /*
>> + * clip width, no need to clip height
>> + */
>> + if (fb_w == in_w) { /* bypass */
>> + disable_val = 1;
>> + clip_left = 0;
>> + clip_right = 0;
>> + } else {
>> + disable_val = 0;
>> + clip_left = x;
>> + clip_right = fb_w - (x + in_w) - 1;
>> + }
>> +
>> + DRM_DEBUG_DRIVER("clip%d: clip_left=%d, clip_right=%d\n",
>> + ch + 1, clip_left, clip_right);
>> +
>> + writel(disable_val, base + ADE_CLIP_DISABLE(ch));
>> + writel((fb_w - 1) << 16 | (in_h - 1), base + ADE_CLIP_SIZE0(ch));
>> + writel(clip_left << 16 | clip_right, base + ADE_CLIP_SIZE1(ch));
>> + ade_update_reload_bit(base, CLIP_OFST + ch, 0);
>> +}
>> +
>> +static void ade_clip_disable(void __iomem *base, u32 ch)
>> +{
>> + writel(1, base + ADE_CLIP_DISABLE(ch));
>> + ade_update_reload_bit(base, CLIP_OFST + ch, 1);
>> +}
>> +
>> +static bool has_Alpha_channel(int format)
>> +{
>> + switch (format) {
>> + case ADE_ARGB_8888:
>> + case ADE_ABGR_8888:
>> + case ADE_RGBA_8888:
>> + case ADE_BGRA_8888:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static void ade_get_blending_params(u32 fmt, u8 glb_alpha, u8 *alp_mode,
>> + u8 *alp_sel, u8 *under_alp_sel)
>> +{
>> + bool has_alpha = has_Alpha_channel(fmt);
>> +
>> + /*
>> + * get alp_mode
>> + */
>> + if (has_alpha && glb_alpha < 255)
>> + *alp_mode = ADE_ALP_PIXEL_AND_GLB;
>> + else if (has_alpha)
>> + *alp_mode = ADE_ALP_PIXEL;
>> + else
>> + *alp_mode = ADE_ALP_GLOBAL;
>> +
>> + /*
>> + * get alp sel
>> + */
>> + *alp_sel = ADE_ALP_MUL_COEFF_3; /* 1 */
>> + *under_alp_sel = ADE_ALP_MUL_COEFF_2; /* 0 */
>> +}
>> +
>> +static void ade_compositor_routing_set(void __iomem *base, u8 ch,
>> + u32 x0, u32 y0,
>> + u32 in_w, u32 in_h, u32 fmt)
>> +{
>> + u8 ovly_ch = 0; /* TODO: This is the zpos, only one plane now */
>
>
> Does the ovly_ch map to the crtc here? If so, maybe instead of hard
> coding it here, you could extract the channel number via plane->crtc?
>
This is the Zpos property of plane not the plane number.
It is hard code because currently, only one primary plane is supported.
Will support muti-planes and add up Zpos property in the future.
Thanks,
-xinliang
> Other than the hard coding, it looks fine to me.
>
> Thanks,
> Archit
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
More information about the linux-arm-kernel
mailing list