[PATCH 13/41] ARM: dts: gose: Name serial port pfc subnodes after device names

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas at glider.be>

Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7793-gose.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f748360ee857..995e1e0fb1ff 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -320,12 +320,12 @@
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
 
-	scif1_pins: serial1 {
+	scif1_pins: scif1 {
 		groups = "scif1_data_d";
 		function = "scif1";
 	};
-- 
2.7.0.rc3.207.g0ac5344