[linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One

Michal Suchanek hramrach at gmail.com
Thu Jun 30 04:13:48 PDT 2016


Hello,

On 25 June 2016 at 05:45,  <megous at megous.com> wrote:
> From: Ondrej Jirman <megous at megous.com>
>
> Use Xulong Orange Pi One GPIO based regulator for
> passive cooling and thermal management.
>
> Signed-off-by: Ondrej Jirman <megous at megous.com>
> ---
>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 39 +++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> index b1bd6b0..a38d871 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> @@ -109,6 +109,45 @@
>         };
>  };
>
> +&cpu0 {
> +       operating-points = <
> +               /* kHz    uV */
> +               1296000 1300000
> +               1200000 1300000

First problem is that the board boots at 1008000 which is not listed
and the kernel complains.

Second problem is that the board locks up during boot with this enabled.

Do you have some suggestion for alternate configuration to test?

Thanks

Michal



More information about the linux-arm-kernel mailing list