[PATCH v3 07/14] clk: sunxi-ng: Add divider
Maxime Ripard
maxime.ripard at free-electrons.com
Wed Jun 29 12:05:28 PDT 2016
Add support for the various dividers (linear, table or pow-of-two based)
found in the CCU.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
drivers/clk/sunxi-ng/Kconfig | 4 ++
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu_div.c | 136 +++++++++++++++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu_div.h | 133 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 274 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu_div.c
create mode 100644 drivers/clk/sunxi-ng/ccu_div.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 3a3bc4368a2a..7e65e776e7a8 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -6,6 +6,10 @@ if SUNXI_CCU
# Base clock types
+config SUNXI_CCU_DIV
+ bool
+ select SUNXI_CCU_MUX
+
config SUNXI_CCU_FRAC
bool
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index a0c53c56ebfe..4bc5b6168560 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_SUNXI_CCU) += ccu_common.o
obj-$(CONFIG_SUNXI_CCU) += ccu_reset.o
# Base clock types
+obj-$(CONFIG_SUNXI_CCU_DIV) += ccu_div.o
obj-$(CONFIG_SUNXI_CCU_FRAC) += ccu_frac.o
obj-$(CONFIG_SUNXI_CCU_GATE) += ccu_gate.o
obj-$(CONFIG_SUNXI_CCU_MUX) += ccu_mux.o
diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
new file mode 100644
index 000000000000..8659b4cb6c20
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "ccu_gate.h"
+#include "ccu_div.h"
+
+static unsigned long ccu_div_round_rate(struct ccu_mux_internal *mux,
+ unsigned long parent_rate,
+ unsigned long rate,
+ void *data)
+{
+ struct ccu_div *cd = data;
+ unsigned long val;
+
+ /*
+ * We can't use divider_round_rate that assumes that there's
+ * several parents, while we might be called to evaluate
+ * several different parents.
+ */
+ val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
+ cd->div.flags);
+
+ return divider_recalc_rate(&cd->common.hw, parent_rate, val,
+ cd->div.table, cd->div.flags);
+}
+
+static void ccu_div_disable(struct clk_hw *hw)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+
+ return ccu_gate_helper_disable(&cd->common, cd->enable);
+}
+
+static int ccu_div_enable(struct clk_hw *hw)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+
+ return ccu_gate_helper_enable(&cd->common, cd->enable);
+}
+
+static int ccu_div_is_enabled(struct clk_hw *hw)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+
+ return ccu_gate_helper_is_enabled(&cd->common, cd->enable);
+}
+
+static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+ unsigned long val;
+ u32 reg;
+
+ reg = readl(cd->common.base + cd->common.reg);
+ val = reg >> cd->div.shift;
+ val &= (1 << cd->div.width) - 1;
+
+ ccu_mux_helper_adjust_parent_for_prediv(&cd->common, &cd->mux, -1,
+ &parent_rate);
+
+ return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
+ cd->div.flags);
+}
+
+static int ccu_div_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+
+ return ccu_mux_helper_determine_rate(&cd->common, &cd->mux,
+ req, ccu_div_round_rate, cd);
+}
+
+static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+ unsigned long flags;
+ unsigned long val;
+ u32 reg;
+
+ ccu_mux_helper_adjust_parent_for_prediv(&cd->common, &cd->mux, -1,
+ &parent_rate);
+
+ val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
+ cd->div.flags);
+
+ spin_lock_irqsave(cd->common.lock, flags);
+
+ reg = readl(cd->common.base + cd->common.reg);
+ reg &= ~GENMASK(cd->div.width + cd->div.shift - 1, cd->div.shift);
+
+ writel(reg | (val << cd->div.shift),
+ cd->common.base + cd->common.reg);
+
+ spin_unlock_irqrestore(cd->common.lock, flags);
+
+ return 0;
+}
+
+static u8 ccu_div_get_parent(struct clk_hw *hw)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+
+ return ccu_mux_helper_get_parent(&cd->common, &cd->mux);
+}
+
+static int ccu_div_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct ccu_div *cd = hw_to_ccu_div(hw);
+
+ return ccu_mux_helper_set_parent(&cd->common, &cd->mux, index);
+}
+
+const struct clk_ops ccu_div_ops = {
+ .disable = ccu_div_disable,
+ .enable = ccu_div_enable,
+ .is_enabled = ccu_div_is_enabled,
+
+ .get_parent = ccu_div_get_parent,
+ .set_parent = ccu_div_set_parent,
+
+ .determine_rate = ccu_div_determine_rate,
+ .recalc_rate = ccu_div_recalc_rate,
+ .set_rate = ccu_div_set_rate,
+};
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
new file mode 100644
index 000000000000..653ade5769b3
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_DIV_H_
+#define _CCU_DIV_H_
+
+#include <linux/clk-provider.h>
+
+#include "ccu_common.h"
+#include "ccu_mux.h"
+
+struct _ccu_div {
+ u8 shift;
+ u8 width;
+
+ u32 flags;
+
+ struct clk_div_table *table;
+};
+
+#define _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, _table, _flags) \
+ { \
+ .shift = _shift, \
+ .width = _width, \
+ .flags = _flags, \
+ .table = _table, \
+ }
+
+#define _SUNXI_CCU_DIV_FLAGS(_shift, _width, _flags) \
+ _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, NULL, _flags)
+
+#define _SUNXI_CCU_DIV_TABLE(_shift, _width, _table) \
+ _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, _table, 0)
+
+#define _SUNXI_CCU_DIV(_shift, _width) \
+ _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, NULL, 0)
+
+struct ccu_div {
+ u32 enable;
+
+ struct _ccu_div div;
+ struct ccu_mux_internal mux;
+ struct ccu_common common;
+};
+
+#define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
+ _shift, _width, \
+ _table, _gate, _flags) \
+ struct ccu_div _struct = { \
+ .div = _SUNXI_CCU_DIV_TABLE(_shift, _width, \
+ _table), \
+ .enable = _gate, \
+ .common = { \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT(_name, \
+ _parent, \
+ &ccu_div_ops, \
+ _flags), \
+ } \
+ }
+
+
+#define SUNXI_CCU_DIV_TABLE(_struct, _name, _parent, _reg, \
+ _shift, _width, \
+ _table, _flags) \
+ SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
+ _shift, _width, _table, 0, \
+ _flags)
+
+#define SUNXI_CCU_M_WITH_MUX_GATE(_struct, _name, _parents, _reg, \
+ _mshift, _mwidth, _muxshift, _muxwidth, \
+ _gate, _flags) \
+ struct ccu_div _struct = { \
+ .enable = _gate, \
+ .div = _SUNXI_CCU_DIV(_mshift, _mwidth), \
+ .mux = SUNXI_CLK_MUX(_muxshift, _muxwidth), \
+ .common = { \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT_PARENTS(_name, \
+ _parents, \
+ &ccu_div_ops, \
+ _flags), \
+ }, \
+ }
+
+#define SUNXI_CCU_M_WITH_MUX(_struct, _name, _parents, _reg, \
+ _mshift, _mwidth, _muxshift, _muxwidth, \
+ _flags) \
+ SUNXI_CCU_M_WITH_MUX_GATE(_struct, _name, _parents, _reg, \
+ _mshift, _mwidth, _muxshift, _muxwidth, \
+ 0, _flags)
+
+
+#define SUNXI_CCU_M_WITH_GATE(_struct, _name, _parent, _reg, \
+ _mshift, _mwidth, _gate, \
+ _flags) \
+ struct ccu_div _struct = { \
+ .enable = _gate, \
+ .div = _SUNXI_CCU_DIV(_mshift, _mwidth), \
+ .common = { \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT(_name, \
+ _parent, \
+ &ccu_div_ops, \
+ _flags), \
+ }, \
+ }
+
+#define SUNXI_CCU_M(_struct, _name, _parent, _reg, _mshift, _mwidth, \
+ _flags) \
+ SUNXI_CCU_M_WITH_GATE(_struct, _name, _parent, _reg, \
+ _mshift, _mwidth, 0, _flags)
+
+static inline struct ccu_div *hw_to_ccu_div(struct clk_hw *hw)
+{
+ struct ccu_common *common = hw_to_ccu_common(hw);
+
+ return container_of(common, struct ccu_div, common);
+}
+
+extern const struct clk_ops ccu_div_ops;
+
+#endif /* _CCU_DIV_H_ */
--
2.9.0
More information about the linux-arm-kernel
mailing list