[PATCH 3/3] phy: rockchip-emmc: Wait even longer for the DLL to lock
Kishon Vijay Abraham I
kishon at ti.com
Wed Jun 29 06:50:31 PDT 2016
On Monday 27 June 2016 11:09 PM, Douglas Anderson wrote:
> Two times out of 2000 reboots I ran into the error message
> "rockchip_emmc_phy_power: dllrdy timeout". Presumably there is some
> corner case where the DLL just takes a little longer to timeout. Let's
> give it even more time to handle these corner cases.
>
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
Acked-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
> drivers/phy/phy-rockchip-emmc.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
> index a2aa6aca7dec..fd57345ffed2 100644
> --- a/drivers/phy/phy-rockchip-emmc.c
> +++ b/drivers/phy/phy-rockchip-emmc.c
> @@ -206,8 +206,18 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
> * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
> * Hopefully we won't be running at 100 kHz, but we should still make
> * sure we wait long enough.
> + *
> + * NOTE: There appear to be corner cases where the DLL seems to take
> + * extra long to lock for reasons that aren't understood. In some
> + * extreme cases we've seen it take up to over 10ms (!). We'll be
> + * generous and give it 50ms. We still busy wait here because:
> + * - In most cases it should be super fast.
> + * - This is not called lots during normal operation so it shouldn't
> + * be a power or performance problem to busy wait. We expect it
> + * only at boot / resume. In both cases, eMMC is probably on the
> + * critical path so busy waiting a little extra time should be OK.
> */
> - timeout = jiffies + msecs_to_jiffies(10);
> + timeout = jiffies + msecs_to_jiffies(50);
> do {
> udelay(1);
>
>
More information about the linux-arm-kernel
mailing list