[PATCH 11/21] usb: chipidea: msm: Use hw_write_id_reg() instead of writel directly

[Peter Chen]

On Sun, Jun 26, 2016 at 12:28:28AM -0700, Stephen Boyd wrote:
> The MSM_USB_BASE macro trick is not very clear, and we're using
> it for only one register write so let's just move to using
> hw_write_id_reg() and passing the ci pointer instead. That
> clearly shows what offset we're using and avoids needing to
> include the msm_hsusb_hw.h file when we're going to delete that
> file soon.
> 
> Cc: Peter Chen <peter.chen at nxp.com>
> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Signed-off-by: Stephen Boyd <stephen.boyd at linaro.org>
> ---
>  drivers/usb/chipidea/ci_hdrc_msm.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
> index 37591a4b1346..520c85e701ef 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -8,14 +8,12 @@
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> -#include <linux/usb/msm_hsusb_hw.h>
> -#include <linux/usb/ulpi.h>
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/chipidea.h>
>  
>  #include "ci.h"
>  
> -#define MSM_USB_BASE	(ci->hw_bank.abs)
> +#define HS_PHY_AHB_MODE			0x0098
>  
>  static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
>  {
> @@ -25,7 +23,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
>  	case CI_HDRC_CONTROLLER_RESET_EVENT:
>  		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
>  		/* use AHB transactor, allow posted data writes */
> -		writel(0x8, USB_AHBMODE);
> +		hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
>  		usb_phy_init(ci->usb_phy);
>  		break;
>  	case CI_HDRC_CONTROLLER_STOPPED_EVENT:
> -- 

Acked-by: Peter Chen <peter.chen at nxp.com>

-- 

Best Regards,
Peter Chen