[PATCH 2/3] clk: sunxi: Add the A83T clocks
Jean-Francois Moine
moinejf at free.fr
Tue Jun 28 10:20:18 PDT 2016
Define the CCU clocks of the Allwinner's A83T Soc.
Signed-off-by: Jean-Francois Moine <moinejf at free.fr>
---
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/ccu-sun8i-a83t.c | 858 +++++++++++++++++++++++++++++++++
include/dt-bindings/clock/sun8i-a83t.h | 97 ++++
include/dt-bindings/reset/sun8i-a83t.h | 62 +++
4 files changed, 1018 insertions(+)
create mode 100644 drivers/clk/sunxi/ccu-sun8i-a83t.c
create mode 100644 include/dt-bindings/clock/sun8i-a83t.h
create mode 100644 include/dt-bindings/reset/sun8i-a83t.h
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index b8ca3e2..6eae4c2 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_MFD_SUN6I_PRCM) += \
clk-sun8i-apb0.o
obj-y += ccu.o
+obj-$(CONFIG_MACH_SUN8I) += ccu-sun8i-a83t.o
diff --git a/drivers/clk/sunxi/ccu-sun8i-a83t.c b/drivers/clk/sunxi/ccu-sun8i-a83t.c
new file mode 100644
index 0000000..8ee35fd
--- /dev/null
+++ b/drivers/clk/sunxi/ccu-sun8i-a83t.c
@@ -0,0 +1,858 @@
+/*
+ * Copyright (c) 2016 Jean-Francois Moine <moinejf at free.fr>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/clock/sun8i-a83t.h>
+#include <dt-bindings/reset/sun8i-a83t.h>
+
+#include "ccu.h"
+
+/* 2 * cpux */
+/* rate = 24MHz * n / p */
+static struct ccu pll_c0cpux_clk = {
+ CCU_REG(0x000),
+ CCU_HW("pll-c0cpux", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 0),
+ CCU_N(8, 8), .n_min = 12,
+/* CCU_P(16, 1), * only when rate < 288MHz */
+ .features = CCU_FEATURE_N0,
+};
+
+static struct ccu pll_c1cpux_clk = {
+ CCU_REG(0x004),
+ CCU_HW("pll-c1cpux", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 1),
+ CCU_N(8, 8), .n_min = 12,
+/* CCU_P(16, 1), * only when rate < 288MHz */
+ .features = CCU_FEATURE_N0,
+};
+
+/* audio */
+/* rate = 24MHz * n / (d1 + 1) / (d2 + 1) / (p + 1) */
+static struct ccu pll_audio_clk = {
+ CCU_REG(0x008),
+ CCU_HW("pll-audio", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 2),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_D2(18, 1),
+ CCU_M(0, 6), /* p = divider */
+ .features = CCU_FEATURE_N0,
+};
+
+/* video 0 */
+/* rate = 24MHz * n / (d1 + 1) >> p */
+static struct ccu pll_video0_clk = {
+ CCU_REG(0x010),
+ CCU_HW("pll-video0", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 3),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_P(0, 2),
+ .features = CCU_FEATURE_N0,
+};
+
+/* video engine */
+/* rate = 24MHz * n / (d1 + 1) / (d2 + 1) */
+static struct ccu pll_ve_clk = {
+ CCU_REG(0x018),
+ CCU_HW("pll-ve", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 4),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_D2(18, 1),
+ .features = CCU_FEATURE_N0,
+};
+
+/* ddr */
+/* rate = 24MHz * (n + 1) / (d1 + 1) / (d2 + 1)
+ * bit 21: DDR_CLOCK = PLL_DDR / PLL_PERIPH (default DDR)
+ */
+static struct ccu pll_ddr_clk = {
+ CCU_REG(0x020),
+ CCU_HW("pll-ddr", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 5),
+ CCU_N(8, 6), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_D2(18, 1),
+ CCU_UPD(30),
+};
+
+/* periph */
+/* rate = 24MHz * n / (d1 + 1) / (d2 + 1) */
+static struct ccu pll_periph_clk = {
+ CCU_REG(0x028),
+ CCU_HW("pll-periph", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 6),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_D2(18, 1),
+ .features = CCU_FEATURE_N0,
+};
+
+/* gpu */
+/* rate = 24MHz * n / (d1 + 1) / (d2 + 1) */
+static struct ccu pll_gpu_clk = {
+ CCU_REG(0x038),
+ CCU_HW("pll-gpu", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 7),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_D2(18, 1),
+ .features = CCU_FEATURE_N0,
+};
+
+/* hsic */
+/* rate = 24MHz * n / (d1 + 1) / (d2 + 1) */
+static struct ccu pll_hsic_clk = {
+ CCU_REG(0x044),
+ CCU_HW("pll-hsic", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 8),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_D2(18, 1),
+ .features = CCU_FEATURE_N0,
+};
+
+/* display engine */
+/* rate = 24MHz * n / (d1 + 1) / (d2 + 1) */
+static struct ccu pll_de_clk = {
+ CCU_REG(0x048),
+ CCU_HW("pll-de", "osc24M", &ccu_pll_ops, 0),
+ CCU_RESET(0x2c4, 12),
+ CCU_BUS(0x64, 12),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 9),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_D2(18, 1),
+ .features = CCU_FEATURE_N0,
+};
+
+/* video 1 */
+/* rate = 24MHz * n / (d1 + 1) >> p */
+static struct ccu pll_video1_clk = {
+ CCU_REG(0x04c),
+ CCU_HW("pll-video1", "osc24M", &ccu_pll_ops, 0),
+ CCU_GATE(31),
+ CCU_LOCK(0x20c, 10),
+ CCU_N(8, 8), .n_min = 12,
+ CCU_D1(16, 1),
+ CCU_P(0, 2),
+ .features = CCU_FEATURE_N0,
+};
+
+static const char * const c0cpux_parents[] = { "osc24M", "pll-c0cpux" };
+static struct ccu c0cpux_clk = {
+ CCU_REG(0x050),
+ CCU_HW_PARENTS("c0cpux", c0cpux_parents, &ccu_periph_ops,
+ CLK_IS_CRITICAL),
+ CCU_MUX(12, 1),
+};
+
+static struct ccu axi0_clk = {
+ CCU_REG(0x050),
+ CCU_HW("axi0", "c0cpux", &ccu_periph_ops, 0),
+ CCU_M(0, 2),
+};
+
+static const char * const c1cpux_parents[] = { "osc24M", "pll-c1cpux" };
+static struct ccu c1cpux_clk = {
+ CCU_REG(0x050),
+ CCU_HW_PARENTS("c1cpux", c1cpux_parents, &ccu_periph_ops,
+ CLK_IS_CRITICAL),
+ CCU_MUX(28, 1),
+};
+
+static struct ccu axi1_clk = {
+ CCU_REG(0x050),
+ CCU_HW("axi1", "c1cpux", &ccu_periph_ops, 0),
+ CCU_M(16, 2),
+};
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+ "pll-periph" };
+static const struct ccu_extra ahb1_extra = {
+ .variable_prediv = { .index = 2, .shift = 6, .width = 2 },
+};
+static struct ccu ahb1_clk = {
+ CCU_REG(0x054),
+ CCU_HW_PARENTS("ahb1", ahb1_parents, &ccu_periph_ops, 0),
+ CCU_MUX(12, 2),
+ CCU_P(4, 2),
+ .features = CCU_FEATURE_MUX_VARIABLE_PREDIV,
+ .extra = &ahb1_extra,
+};
+
+static struct ccu apb1_clk = {
+ CCU_REG(0x054),
+ CCU_HW("apb1", "ahb1", &ccu_periph_ops, 0),
+ CCU_M(8, 2),
+};
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+ "pll-periph", "pll-periph" };
+static struct ccu apb2_clk = {
+ CCU_REG(0x058),
+ CCU_HW_PARENTS("apb2", apb2_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_M(0, 5),
+ CCU_P(16, 2),
+};
+
+/* from the bpi-m3 legacy driver, pll-periph is the only ahb2 parent */
+static struct ccu ahb2_clk = {
+ CCU_HW("ahb2", "pll-periph", &ccu_fixed_factor_ops, 0),
+ CCU_FIXED(1, 2),
+};
+
+static struct ccu bus_mipi_dsi_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-mipi-dsi", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(1),
+};
+static struct ccu bus_ss_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-ss", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(5),
+};
+static struct ccu bus_dma_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-dma", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(6),
+};
+/* the mmcx bus gates are handled by the mmcx clocks*/
+static struct ccu bus_mmc0_clk = {
+ CCU_HW("bus-mmc0", "ahb1", &ccu_periph_ops, 0),
+};
+static struct ccu bus_mmc1_clk = {
+ CCU_HW("bus-mmc1", "ahb1", &ccu_periph_ops, 0),
+};
+static struct ccu bus_mmc2_clk = {
+ CCU_HW("bus-mmc2", "ahb1", &ccu_periph_ops, 0),
+};
+static struct ccu bus_nand_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-nand", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(13),
+};
+static struct ccu bus_dram_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-dram", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(14),
+};
+static struct ccu bus_emac_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-emac", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(17),
+};
+static struct ccu bus_hstimer_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-hstimer", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(19),
+};
+static struct ccu bus_spi0_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-spi0", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(20),
+};
+static struct ccu bus_spi1_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-spi1", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(21),
+};
+static struct ccu bus_usbdrd_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-usbdrd", "ahb2", &ccu_periph_ops, 0),
+ CCU_GATE(24),
+};
+static struct ccu bus_ehci0_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-ehci0", "ahb2", &ccu_periph_ops, 0),
+ CCU_GATE(26),
+};
+static struct ccu bus_ehci1_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-ehci1", "ahb2", &ccu_periph_ops, 0),
+ CCU_GATE(27),
+};
+static struct ccu bus_ohci0_clk = {
+ CCU_REG(0x060),
+ CCU_HW("bus-ohci0", "ahb2", &ccu_periph_ops, 0),
+ CCU_GATE(29),
+};
+
+static struct ccu bus_ve_clk = {
+ CCU_REG(0x064),
+ CCU_HW("bus-ve", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(0),
+};
+static struct ccu bus_csi_clk = {
+ CCU_REG(0x064),
+ CCU_HW("bus-csi", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(8),
+};
+static struct ccu bus_gpu_clk = {
+ CCU_REG(0x064),
+ CCU_HW("bus-gpu", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(20),
+};
+static struct ccu bus_msgbox_clk = {
+ CCU_REG(0x064),
+ CCU_HW("bus-msgbox", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(21),
+};
+static struct ccu bus_spinlock_clk = {
+ CCU_REG(0x064),
+ CCU_HW("bus-spinlock", "ahb1", &ccu_periph_ops, 0),
+ CCU_GATE(22),
+};
+
+static struct ccu bus_spdif_clk = {
+ CCU_REG(0x068),
+ CCU_HW("bus-spdif", "apb1", &ccu_periph_ops, 0),
+ CCU_GATE(1),
+};
+static struct ccu bus_pio_clk = {
+ CCU_REG(0x068),
+ CCU_HW("bus-pio", "apb1", &ccu_periph_ops, 0),
+ CCU_GATE(5),
+};
+static struct ccu bus_i2c0_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-i2c0", "apb2", &ccu_periph_ops, 0),
+ CCU_GATE(0),
+};
+static struct ccu bus_i2c1_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-i2c1", "apb", &ccu_periph_ops, 0),
+ CCU_GATE(1),
+};
+static struct ccu bus_i2c2_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-i2c2", "apb2", &ccu_periph_ops, 0),
+ CCU_GATE(2),
+};
+static struct ccu bus_uart0_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-uart0", "apb2", &ccu_periph_ops, 0),
+ CCU_GATE(16),
+};
+static struct ccu bus_uart1_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-uart1", "apb2", &ccu_periph_ops, 0),
+ CCU_GATE(17),
+};
+static struct ccu bus_uart2_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-uart2", "apb2", &ccu_periph_ops, 0),
+ CCU_GATE(18),
+};
+static struct ccu bus_uart3_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-uart3", "apb2", &ccu_periph_ops, 0),
+ CCU_GATE(19),
+};
+static struct ccu bus_uart4_clk = {
+ CCU_REG(0x06c),
+ CCU_HW("bus-uart4", "apb2", &ccu_periph_ops, 0),
+ CCU_GATE(20),
+};
+
+static const char * const cci400_parents[] = { "osc24M", "pll-periph",
+ "pll-hsic" };
+static struct ccu cci400_clk = {
+ CCU_REG(0x078),
+ CCU_HW_PARENTS("cci400", cci400_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_M(0, 2),
+};
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" };
+static struct ccu nand_clk = {
+ CCU_REG(0x080),
+ CCU_HW_PARENTS("nand", mod0_default_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+ CCU_P(16, 2),
+};
+
+static struct ccu mmc0_clk = {
+ CCU_REG(0x088),
+ CCU_HW_PARENTS("mmc0", mod0_default_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_RESET(0x2c0, 8),
+ CCU_BUS(0x060, 8),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+ CCU_P(16, 2),
+ .features = CCU_FEATURE_SET_RATE_UNGATE,
+};
+static struct ccu mmc0_sample_clk = {
+ CCU_REG(0x088),
+ CCU_HW("mmc0_sample", "mmc0", &ccu_phase_ops, 0),
+ CCU_PHASE(20, 3),
+};
+static struct ccu mmc0_output_clk = {
+ CCU_REG(0x088),
+ CCU_HW("mmc0_output", "mmc0", &ccu_phase_ops, 0),
+ CCU_PHASE(8, 3),
+};
+
+static struct ccu mmc1_clk = {
+ CCU_REG(0x08c),
+ CCU_HW_PARENTS("mmc1", mod0_default_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_RESET(0x2c0, 9),
+ CCU_BUS(0x060, 9),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+ CCU_P(16, 2),
+ .features = CCU_FEATURE_SET_RATE_UNGATE,
+};
+static struct ccu mmc1_sample_clk = {
+ CCU_REG(0x08c),
+ CCU_HW("mmc1_sample", "mmc1", &ccu_phase_ops, 0),
+ CCU_PHASE(20, 3),
+};
+static struct ccu mmc1_output_clk = {
+ CCU_REG(0x08c),
+ CCU_HW("mmc1_output", "mmc1", &ccu_phase_ops, 0),
+ CCU_PHASE(8, 3),
+};
+
+/* new mode */
+static const struct ccu_extra mmc_extra = {
+ .mode_select.rate = 100000000,
+ .mode_select.bit = 30,
+};
+static struct ccu mmc2_clk = {
+ CCU_REG(0x090),
+ CCU_HW_PARENTS("mmc2", mod0_default_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_RESET(0x2c0, 10),
+ CCU_BUS(0x060, 10),
+ CCU_M(0, 4),
+ CCU_P(16, 2),
+ CCU_GATE(31),
+ .features = CCU_FEATURE_SET_RATE_UNGATE |
+ CCU_FEATURE_MODE_SELECT,
+ .extra = &mmc_extra,
+};
+static struct ccu mmc2_sample_clk = {
+ CCU_REG(0x090),
+ CCU_HW("mmc2_sample", "mmc2", &ccu_phase_ops, 0),
+ CCU_PHASE(20, 3),
+};
+static struct ccu mmc2_output_clk = {
+ CCU_REG(0x090),
+ CCU_HW("mmc2_output", "mmc2", &ccu_phase_ops, 0),
+ CCU_PHASE(8, 3),
+};
+
+static struct ccu ss_clk = {
+ CCU_REG(0x09c),
+ CCU_HW_PARENTS("ss", mod0_default_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+ CCU_P(16, 2),
+};
+
+static struct ccu spi0_clk = {
+ CCU_REG(0x0a0),
+ CCU_HW_PARENTS("spi0", mod0_default_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+ CCU_P(16, 2),
+};
+
+static struct ccu spi1_clk = {
+ CCU_REG(0x0a4),
+ CCU_HW_PARENTS("spi1", mod0_default_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+ CCU_P(16, 2),
+};
+
+static struct ccu daudio0_clk = {
+ CCU_REG(0x0b0),
+ CCU_HW("daudio0", "pll-audio", &ccu_periph_ops, 0),
+ CCU_BUS(0x068, 12),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+};
+static struct ccu daudio1_clk = {
+ CCU_REG(0x0b4),
+ CCU_HW("daudio1", "pll-audio", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+ CCU_BUS(0x068, 13),
+ CCU_M(0, 4),
+};
+
+static struct ccu daudio2_clk = {
+ CCU_REG(0x0b8),
+ CCU_HW("daudio2", "pll-audio", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+ CCU_BUS(0x068, 14),
+ CCU_M(0, 4),
+};
+
+static struct ccu tdm_clk = {
+ CCU_REG(0x0bc),
+ CCU_HW("tdm", "pll-audio", &ccu_periph_ops, 0),
+ CCU_BUS(0x068, 15),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+};
+
+static struct ccu spdif_clk = {
+ CCU_REG(0x0c0),
+ CCU_HW("spdif", "pll-audio", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+};
+
+static struct ccu usb_phy0_clk = {
+ CCU_REG(0x0cc),
+ CCU_HW("usb-phy0", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(8),
+};
+
+static struct ccu usb_phy1_clk = {
+ CCU_REG(0x0cc),
+ CCU_HW("usb-phy1", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(9),
+};
+
+static struct ccu usb_hsic_clk = {
+ CCU_REG(0x0cc),
+ CCU_HW("usb-hsic", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(10),
+};
+
+static struct ccu osc12m_clk = {
+ CCU_REG(0x0cc),
+ CCU_HW("osc12M", "osc24M", &ccu_fixed_factor_ops, 0),
+ CCU_GATE(11),
+ CCU_FIXED(1, 2),
+};
+
+static struct ccu ohci0_clk = {
+ CCU_REG(0x0cc),
+ CCU_HW("ohci0", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(16),
+};
+
+static struct ccu dram_clk = {
+ CCU_REG(0x0f4),
+ CCU_HW("dram", "pll-ddr", &ccu_periph_ops, 0),
+ CCU_M(0, 4),
+ CCU_UPD(16),
+};
+
+/* pll_ddr config not done */
+
+static struct ccu dram_ve_clk = {
+ CCU_REG(0x0100),
+ CCU_HW("dram-ve", "dram", &ccu_periph_ops, 0),
+ CCU_GATE(0),
+};
+
+static struct ccu dram_csi_clk = {
+ CCU_REG(0x0100),
+ CCU_HW("dram-csi", "dram", &ccu_periph_ops, 0),
+ CCU_GATE(1),
+};
+
+static struct ccu tcon0_clk = {
+ CCU_REG(0x118),
+ CCU_HW("tcon0", "pll-video0", &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_RESET(0x2c4, 4),
+ CCU_BUS(0x064, 4),
+ CCU_GATE(31),
+};
+
+static struct ccu tcon1_clk = {
+ CCU_REG(0x11c),
+ CCU_HW("tcon1", "pll-video1", &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_RESET(0x2c4, 5),
+ CCU_BUS(0x064, 5),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+};
+
+static struct ccu csi_misc_clk = {
+ CCU_REG(0x0130),
+ CCU_HW("csi-misc", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(16),
+};
+
+static struct ccu mipi_csi_clk = {
+ CCU_REG(0x0130),
+ CCU_HW("mipi-csi", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+};
+
+/* hack: "osc32k" is used for no parent */
+static const char * const csi_sclk_parents[] = { "pll-periph",
+ "osc32k", "osc32k", "osc32k", "osc32k",
+ "pll-ve" };
+static struct ccu csi_sclk_clk = {
+ CCU_REG(0x134),
+ CCU_HW_PARENTS("csi-sclk", csi_sclk_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 3),
+ CCU_GATE(31),
+ CCU_M(16, 4),
+};
+
+/* hack: "osc32k" is used for no parent */
+static const char * const csi_mclk_parents[] = {"osc32k", "osc32k", "osc32k",
+ "pll-periph", "osc32k",
+ "osc24M"};
+static struct ccu csi_mclk_clk = {
+ CCU_REG(0x134),
+ CCU_HW_PARENTS("csi-mclk", csi_mclk_parents, &ccu_periph_ops, 0),
+ CCU_MUX(8, 3),
+ CCU_GATE(15),
+ CCU_M(0, 5),
+};
+
+static struct ccu ve_clk = {
+ CCU_REG(0x13c),
+ CCU_HW("ve", "pll-ve", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+ CCU_M(16, 3),
+};
+
+static struct ccu avs_clk = {
+ CCU_REG(0x0144),
+ CCU_HW("avs", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+};
+
+static struct ccu hdmi_clk = {
+ CCU_REG(0x150),
+ CCU_HW("hdmi", "pll-video1", &ccu_periph_ops, 0),
+ CCU_MUX(24, 2),
+ CCU_BUS(0x064, 11),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+};
+
+static struct ccu hdmi_ddc_clk = {
+ CCU_REG(0x0154),
+ CCU_HW("hdmi-ddc", "osc24M", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+};
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph",
+ "pll-ddr" };
+static struct ccu mbus_clk = {
+ CCU_REG(0x15c),
+ CCU_HW_PARENTS("mbus", mbus_parents, &ccu_periph_ops, CLK_IS_CRITICAL),
+ CCU_MUX(24, 2),
+ CCU_GATE(31),
+ CCU_M(0, 3),
+};
+
+static struct ccu mipi_dsi0_clk = {
+ CCU_REG(0x168),
+ CCU_HW("mipi-dsi0", "pll-video0", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+};
+
+static const char * const mipi_dsi1_parents[] = { "osc24M",
+/* hack: "osc32k" is used for "no parent" */
+ "osc32k", "osc32k", "osc32k", "osc32k",
+ "osc32k", "osc32k", "osc32k", "osc32k",
+ "pll-video0" };
+static struct ccu mipi_dsi1_clk = {
+ CCU_REG(0x16c),
+ CCU_HW_PARENTS("mipi-dsi1", mipi_dsi1_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 4),
+ CCU_GATE(31),
+ CCU_M(0, 4),
+};
+
+static struct ccu gpu_core_clk = {
+ CCU_REG(0x1a0),
+ CCU_HW("gpu-core", "pll-gpu", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+ CCU_M(0, 3),
+};
+
+static const char * const gpu_mem_parents[] = { "pll-gpu", "pll-periph" };
+static struct ccu gpu_mem_clk = {
+ CCU_REG(0x1a4),
+ CCU_HW_PARENTS("gpu-mem", gpu_mem_parents, &ccu_periph_ops, 0),
+ CCU_MUX(24, 1),
+ CCU_GATE(31),
+ CCU_M(0, 3),
+};
+
+static struct ccu gpu_hyd_clk = {
+ CCU_REG(0x1a8),
+ CCU_HW("gpu-hyd", "pll-gpu", &ccu_periph_ops, 0),
+ CCU_GATE(31),
+ CCU_M(0, 3),
+};
+
+static struct clk_hw_onecell_data sun8i_a83t_ccu_data = {
+ .num = 93,
+ .hws = {
+ [CLK_BUS_DMA] = &bus_dma_clk.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.hw,
+ [CLK_BUS_UART4] = &bus_uart4_clk.hw,
+ [CLK_BUS_USBDRD] = &bus_usbdrd_clk.hw,
+ [CLK_DAUDIO0] = &daudio0_clk.hw,
+ [CLK_DAUDIO1] = &daudio1_clk.hw,
+ [CLK_DAUDIO2] = &daudio2_clk.hw,
+ [CLK_HDMI] = &hdmi_clk.hw,
+ [CLK_HDMI_DDC] = &hdmi_ddc_clk.hw,
+ [CLK_MMC0] = &mmc0_clk.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.hw,
+ [CLK_MMC1] = &mmc1_clk.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.hw,
+ [CLK_MMC2] = &mmc2_clk.hw,
+ [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.hw,
+ [CLK_MMC2_OUTPUT] = &mmc2_output_clk.hw,
+ [CLK_OHCI0] = &ohci0_clk.hw,
+ [CLK_OSC12M] = &osc12m_clk.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_DE] = &pll_de_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.hw,
+ [CLK_PLL_HSIC] = &pll_hsic_clk.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.hw,
+ [CLK_SPDIF] = &spdif_clk.hw,
+ [CLK_SPI0] = &spi0_clk.hw,
+ [CLK_SPI1] = &spi1_clk.hw,
+ [CLK_TCON0] = &tcon0_clk.hw,
+ [CLK_TCON1] = &tcon1_clk.hw,
+ [CLK_TDM] = &tdm_clk.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.hw,
+ [CLK_USB_HSIC] = &usb_hsic_clk.hw,
+ [CLK_VE] = &ve_clk.hw,
+ &pll_c0cpux_clk.hw,
+ &pll_c1cpux_clk.hw,
+ &pll_ddr_clk.hw, /* 50 */
+ &c0cpux_clk.hw,
+ &axi0_clk.hw,
+ &c1cpux_clk.hw,
+ &axi1_clk.hw,
+ &ahb1_clk.hw,
+ &apb1_clk.hw,
+ &apb2_clk.hw,
+ &ahb2_clk.hw,
+ &bus_mipi_dsi_clk.hw,
+ &bus_ss_clk.hw, /* 60 */
+ &bus_nand_clk.hw,
+ &bus_dram_clk.hw,
+ &bus_emac_clk.hw,
+ &bus_hstimer_clk.hw,
+ &bus_spi0_clk.hw,
+ &bus_spi1_clk.hw,
+ &bus_ve_clk.hw,
+ &bus_csi_clk.hw,
+ &bus_gpu_clk.hw,
+ &bus_msgbox_clk.hw, /* 70 */
+ &bus_spinlock_clk.hw,
+ &bus_spdif_clk.hw,
+ &bus_i2c0_clk.hw,
+ &bus_i2c1_clk.hw,
+ &bus_i2c2_clk.hw,
+ &cci400_clk.hw,
+ &nand_clk.hw,
+ &ss_clk.hw,
+ &dram_clk.hw,
+ &dram_ve_clk.hw, /* 80 */
+ &dram_csi_clk.hw,
+ &csi_misc_clk.hw,
+ &mipi_csi_clk.hw,
+ &csi_sclk_clk.hw,
+ &csi_mclk_clk.hw,
+ &avs_clk.hw,
+ &mbus_clk.hw,
+ &mipi_dsi0_clk.hw,
+ &mipi_dsi1_clk.hw,
+ &gpu_core_clk.hw, /* 90 */
+ &gpu_mem_clk.hw,
+ &gpu_hyd_clk.hw,
+ },
+};
+
+static struct ccu_reset_map sun8i_a83t_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, 0 },
+ [RST_USB_PHY1] = { 0x0cc, 1 },
+ [RST_USB_HSIC] = { 0x0cc, 2 },
+ [RST_DMA] = { 0x2c0, 6 },
+ [RST_USBDRD] = { 0x2c0, 24 },
+ [RST_EHCI0] = { 0x2c0, 26 },
+ [RST_EHCI1] = { 0x2c0, 27 },
+ [RST_OHCI0] = { 0x2c0, 29 },
+ [RST_HDMI0] = { 0x2c4, 10 },
+ [RST_HDMI1] = { 0x2c4, 11 },
+ [RST_UART0] = { 0x2d8, 16 },
+ [RST_UART1] = { 0x2d8, 17 },
+ [RST_UART2] = { 0x2d8, 18 },
+ [RST_UART3] = { 0x2d8, 19 },
+ [RST_UART4] = { 0x2d8, 20 },
+};
+
+static struct ccu_reset sun8i_a83t_resets = {
+ .rcdev.ops = &ccu_reset_ops,
+ .rcdev.owner = THIS_MODULE,
+ .rcdev.nr_resets = ARRAY_SIZE(sun8i_a83t_ccu_resets),
+ .reset_map = sun8i_a83t_ccu_resets,
+};
+
+static void __init sun8i_a83t_ccu_setup(struct device_node *node)
+{
+ ccu_probe(node, &sun8i_a83t_ccu_data,
+ &sun8i_a83t_resets);
+}
+CLK_OF_DECLARE(sun8i_a83t_ccu, "allwinner,sun8i-a83t-ccu",
+ sun8i_a83t_ccu_setup);
diff --git a/include/dt-bindings/clock/sun8i-a83t.h b/include/dt-bindings/clock/sun8i-a83t.h
new file mode 100644
index 0000000..c063783
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-a83t.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2016 Jean-Francois Moine <moinejf at free.fr>
+ * Based on the H3 version from
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_A83T_H_
+#define _DT_BINDINGS_CLK_SUN8I_A83T_H_
+
+#define CLK_BUS_DMA 0
+#define CLK_BUS_EHCI0 1
+#define CLK_BUS_EHCI1 2
+#define CLK_BUS_MMC0 3
+#define CLK_BUS_MMC1 4
+#define CLK_BUS_MMC2 5
+#define CLK_BUS_OHCI0 6
+#define CLK_BUS_PIO 7
+#define CLK_BUS_UART0 8
+#define CLK_BUS_UART1 9
+#define CLK_BUS_UART2 10
+#define CLK_BUS_UART3 11
+#define CLK_BUS_UART4 12
+#define CLK_BUS_USBDRD 13
+#define CLK_DAUDIO0 14
+#define CLK_DAUDIO1 15
+#define CLK_DAUDIO2 16
+#define CLK_HDMI 17
+#define CLK_HDMI_DDC 18
+#define CLK_MMC0 19
+#define CLK_MMC0_SAMPLE 20
+#define CLK_MMC0_OUTPUT 21
+#define CLK_MMC1 22
+#define CLK_MMC1_SAMPLE 23
+#define CLK_MMC1_OUTPUT 24
+#define CLK_MMC2 25
+#define CLK_MMC2_SAMPLE 26
+#define CLK_MMC2_OUTPUT 27
+#define CLK_OHCI0 28
+#define CLK_OSC12M 29
+#define CLK_PLL_AUDIO 30
+#define CLK_PLL_DE 31
+#define CLK_PLL_GPU 32
+#define CLK_PLL_HSIC 33
+#define CLK_PLL_PERIPH 34
+#define CLK_PLL_VE 35
+#define CLK_PLL_VIDEO0 36
+#define CLK_PLL_VIDEO1 37
+#define CLK_SPDIF 38
+#define CLK_SPI0 39
+#define CLK_SPI1 40
+#define CLK_TCON0 41
+#define CLK_TCON1 42
+#define CLK_TDM 43
+#define CLK_USB_PHY0 44
+#define CLK_USB_PHY1 45
+#define CLK_USB_HSIC 46
+#define CLK_VE 47
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_A83T_H_ */
diff --git a/include/dt-bindings/reset/sun8i-a83t.h b/include/dt-bindings/reset/sun8i-a83t.h
new file mode 100644
index 0000000..174382e
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-a83t.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2016 Jean-Francois Moine <moinejf at free.fr>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_A83T_H_
+#define _DT_BINDINGS_RST_SUN8I_A83T_H_
+
+#define RST_DMA 0
+#define RST_EHCI0 1
+#define RST_EHCI1 2
+#define RST_HDMI0 3
+#define RST_HDMI1 4
+#define RST_OHCI0 5
+#define RST_UART0 6
+#define RST_UART1 7
+#define RST_UART2 8
+#define RST_UART3 9
+#define RST_UART4 10
+#define RST_USB_HSIC 11
+#define RST_USB_PHY0 12
+#define RST_USB_PHY1 13
+#define RST_USBDRD 14
+
+#endif /* _DT_BINDINGS_RST_SUN8I_A83T_H_ */
--
2.9.0
More information about the linux-arm-kernel
mailing list