[PATCH 05/21] usb: chipidea: Handle extcon events properly

[Peter Chen]

On Sun, Jun 26, 2016 at 12:28:22AM -0700, Stephen Boyd wrote:
> We're currently emulating the vbus and id interrupts in the OTGSC
> read API, but we also need to make sure that if we're handling
> the events with extcon that we don't enable the interrupts for
> those events in the hardware. Therefore, properly emulate this
> register if we're using extcon, but don't enable the interrupts.
> This allows me to get my cable connect/disconnect working
> properly without getting spurious interrupts on my device that
> uses an extcon for these two events.
> 
> Cc: Peter Chen <peter.chen at nxp.com>
> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Cc: "Ivan T. Ivanov" <iivanov.xz at gmail.com>
> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
> Signed-off-by: Stephen Boyd <stephen.boyd at linaro.org>
> ---
>  drivers/usb/chipidea/otg.c   | 46 +++++++++++++++++++++++++++++++++++++++-----
>  include/linux/usb/chipidea.h |  2 ++
>  2 files changed, 43 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
> index 763a8332b009..b6a88bea4cac 100644
> --- a/drivers/usb/chipidea/otg.c
> +++ b/drivers/usb/chipidea/otg.c
> @@ -44,12 +44,15 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
>  		else
>  			val &= ~OTGSC_BSVIS;
>  
> -		cable->changed = false;
> -
>  		if (cable->state)
>  			val |= OTGSC_BSV;
>  		else
>  			val &= ~OTGSC_BSV;
> +
> +		if (cable->enabled)
> +			val |= OTGSC_BSVIE;
> +		else
> +			val &= ~OTGSC_BSVIE;
>  	}
>  
>  	cable = &ci->platdata->id_extcon;
> @@ -59,15 +62,18 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
>  		else
>  			val &= ~OTGSC_IDIS;
>  
> -		cable->changed = false;
> -
>  		if (cable->state)
>  			val |= OTGSC_ID;
>  		else
>  			val &= ~OTGSC_ID;
> +
> +		if (cable->enabled)
> +			val |= OTGSC_IDIE;
> +		else
> +			val &= ~OTGSC_IDIE;
>  	}
>  
> -	return val;
> +	return val & mask;
>  }
>  
>  /**
> @@ -77,6 +83,36 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
>   */
>  void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
>  {
> +	struct ci_hdrc_cable *cable;
> +
> +	cable = &ci->platdata->vbus_extcon;
> +	if (!IS_ERR(cable->edev)) {
> +		if (data & mask & OTGSC_BSVIS)
> +			cable->changed = false;
> +
> +		/* Don't enable vbus interrupt if using external notifier */
> +		if (data & mask & OTGSC_BSVIE) {
> +			cable->enabled = true;
> +			data &= ~OTGSC_BSVIE;
> +		} else if (mask & OTGSC_BSVIE) {
> +			cable->enabled = false;
> +		}
> +	}
> +
> +	cable = &ci->platdata->id_extcon;
> +	if (!IS_ERR(cable->edev)) {
> +		if (data & mask & OTGSC_IDIS)
> +			cable->changed = false;
> +
> +		/* Don't enable id interrupt if using external notifier */
> +		if (data & mask & OTGSC_IDIE) {
> +			cable->enabled = true;
> +			data &= ~OTGSC_IDIE;
> +		} else if (mask & OTGSC_IDIE) {
> +			cable->enabled = false;
> +		}
> +	}
> +
>  	hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
>  }
>  
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index 5dd75fa47dd8..f9be467d6695 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -14,6 +14,7 @@ struct ci_hdrc;
>   * struct ci_hdrc_cable - structure for external connector cable state tracking
>   * @state: current state of the line
>   * @changed: set to true when extcon event happen
> + * @enabled: set to true if we've enabled the vbus or id interrupt
>   * @edev: device which generate events
>   * @ci: driver state of the chipidea device
>   * @nb: hold event notification callback
> @@ -22,6 +23,7 @@ struct ci_hdrc;
>  struct ci_hdrc_cable {
>  	bool				state;
>  	bool				changed;
> +	bool				enabled;
>  	struct extcon_dev		*edev;
>  	struct ci_hdrc			*ci;
>  	struct notifier_block		nb;
> -- 

Acked-by: Peter Chen <peter.chen at nxp.com>

-- 

Best Regards,
Peter Chen