[PATCH v2] arm64: defconfig: add options for virtualization and containers

Christoffer Dall christoffer.dall at linaro.org
Mon Jun 27 04:11:13 PDT 2016


On Wed, Jun 15, 2016 at 11:27:59AM +0300, Riku Voipio wrote:
> Enable options commonly needed by popular virtualization
> and container applications. Use modules when possible to
> avoid too much overhead for users not interested.
> 
> - add namespace and cgroup options needed
> - add seccomp - optional, but enhances Qemu etc
> - bridge, nat, veth, macvtap and multicast for routing
>   guests and containers
> - btfrs and overlayfs modules for container COW backends
> - while near it, make fuse a module instead of built-in.
> 
> Generated with make saveconfig and dropping unrelated spurious
> change hunks while commiting. bloat-o-meter old-vmlinux vmlinux:
> 
> add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652)
> ....
> Total: Before=10515408, After=10604060, chg +0.84%
> 
> Signed-off-by: Riku Voipio <riku.voipio at linaro.org>

I'm unclear what the conclusion on the v1 regarding using modules in
defconfig was exactly, but I'm happy to see a defconfig that makes it
easier to test virtualization.

Thanks,
-Christoffer

> ---
> v2: Adapt to v4.7-rc3 where CONFIG_DEVPTS_MULTIPLE_INSTANCES is gone
> ---
>  arch/arm64/configs/defconfig | 52 +++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 46 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index fd2d74d..2d9f845 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -15,10 +15,14 @@ CONFIG_IKCONFIG_PROC=y
>  CONFIG_LOG_BUF_SHIFT=14
>  CONFIG_MEMCG=y
>  CONFIG_MEMCG_SWAP=y
> +CONFIG_BLK_CGROUP=y
> +CONFIG_CGROUP_PIDS=y
>  CONFIG_CGROUP_HUGETLB=y
> -# CONFIG_UTS_NS is not set
> -# CONFIG_IPC_NS is not set
> -# CONFIG_NET_NS is not set
> +CONFIG_CPUSETS=y
> +CONFIG_CGROUP_DEVICE=y
> +CONFIG_CGROUP_CPUACCT=y
> +CONFIG_CGROUP_PERF=y
> +CONFIG_USER_NS=y
>  CONFIG_SCHED_AUTOGROUP=y
>  CONFIG_BLK_DEV_INITRD=y
>  CONFIG_KALLSYMS_ALL=y
> @@ -69,6 +73,7 @@ CONFIG_PREEMPT=y
>  CONFIG_KSM=y
>  CONFIG_TRANSPARENT_HUGEPAGE=y
>  CONFIG_CMA=y
> +CONFIG_SECCOMP=y
>  CONFIG_XEN=y
>  # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
>  CONFIG_COMPAT=y
> @@ -81,10 +86,37 @@ CONFIG_NET=y
>  CONFIG_PACKET=y
>  CONFIG_UNIX=y
>  CONFIG_INET=y
> +CONFIG_IP_MULTICAST=y
>  CONFIG_IP_PNP=y
>  CONFIG_IP_PNP_DHCP=y
>  CONFIG_IP_PNP_BOOTP=y
> -# CONFIG_IPV6 is not set
> +CONFIG_IPV6=m
> +CONFIG_NETFILTER=y
> +CONFIG_NF_CONNTRACK=m
> +CONFIG_NF_CONNTRACK_EVENTS=y
> +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
> +CONFIG_NETFILTER_XT_TARGET_LOG=m
> +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
> +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> +CONFIG_NF_CONNTRACK_IPV4=m
> +CONFIG_IP_NF_IPTABLES=m
> +CONFIG_IP_NF_FILTER=m
> +CONFIG_IP_NF_TARGET_REJECT=m
> +CONFIG_IP_NF_NAT=m
> +CONFIG_IP_NF_TARGET_MASQUERADE=m
> +CONFIG_IP_NF_MANGLE=m
> +CONFIG_NF_CONNTRACK_IPV6=m
> +CONFIG_IP6_NF_IPTABLES=m
> +CONFIG_IP6_NF_FILTER=m
> +CONFIG_IP6_NF_TARGET_REJECT=m
> +CONFIG_IP6_NF_MANGLE=m
> +CONFIG_IP6_NF_NAT=m
> +CONFIG_IP6_NF_TARGET_MASQUERADE=m
> +CONFIG_BRIDGE=m
> +CONFIG_BRIDGE_VLAN_FILTERING=y
> +CONFIG_VLAN_8021Q=m
> +CONFIG_VLAN_8021Q_GVRP=y
> +CONFIG_VLAN_8021Q_MVRP=y
>  CONFIG_BPF_JIT=y
>  CONFIG_CFG80211=m
>  CONFIG_MAC80211=m
> @@ -100,6 +132,7 @@ CONFIG_MTD=y
>  CONFIG_MTD_M25P80=y
>  CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_LOOP=y
> +CONFIG_BLK_DEV_NBD=m
>  CONFIG_VIRTIO_BLK=y
>  # CONFIG_SCSI_PROC_FS is not set
>  CONFIG_BLK_DEV_SD=y
> @@ -116,7 +149,10 @@ CONFIG_SATA_SIL24=y
>  CONFIG_PATA_PLATFORM=y
>  CONFIG_PATA_OF_PLATFORM=y
>  CONFIG_NETDEVICES=y
> +CONFIG_MACVLAN=m
> +CONFIG_MACVTAP=m
>  CONFIG_TUN=y
> +CONFIG_VETH=m
>  CONFIG_VIRTIO_NET=y
>  CONFIG_AMD_XGBE=y
>  CONFIG_NET_XGENE=y
> @@ -304,12 +340,16 @@ CONFIG_ARM_SCPI_PROTOCOL=y
>  CONFIG_ACPI=y
>  CONFIG_EXT2_FS=y
>  CONFIG_EXT3_FS=y
> +CONFIG_EXT4_FS_POSIX_ACL=y
> +CONFIG_BTRFS_FS=m
> +CONFIG_BTRFS_FS_POSIX_ACL=y
>  CONFIG_FANOTIFY=y
>  CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
>  CONFIG_QUOTA=y
>  CONFIG_AUTOFS4_FS=y
> -CONFIG_FUSE_FS=y
> -CONFIG_CUSE=y
> +CONFIG_FUSE_FS=m
> +CONFIG_CUSE=m
> +CONFIG_OVERLAY_FS=m
>  CONFIG_VFAT_FS=y
>  CONFIG_TMPFS=y
>  CONFIG_HUGETLBFS=y
> -- 
> 2.1.4
> 



More information about the linux-arm-kernel mailing list