[PATCH v8 2/3] CMDQ: Mediatek CMDQ driver

CK Hu ck.hu at mediatek.com
Sun Jun 26 19:00:07 PDT 2016


On Fri, 2016-06-24 at 19:39 +0800, Horng-Shyang Liao wrote:
> On Tue, 2016-06-21 at 15:46 +0800, Horng-Shyang Liao wrote:
> > On Tue, 2016-06-21 at 10:03 +0800, CK Hu wrote:
> > > On Mon, 2016-06-20 at 19:22 +0800, Horng-Shyang Liao wrote:
> > > > On Mon, 2016-06-20 at 18:41 +0800, CK Hu wrote:
> > > > > [Snip...]
> > > > > 
> > > > > > +
> > > > > > +static int cmdq_eng_get_thread(u64 flag)
> > > > > > +{
> > > > > > +	if (flag & BIT_ULL(CMDQ_ENG_DISP_DSI0))
> > > > > > +		return CMDQ_THR_DISP_MAIN_IDX;
> > > > > > +	else if (flag & BIT_ULL(CMDQ_ENG_DISP_DPI0))
> > > > > > +		return CMDQ_THR_DISP_SUB_IDX;
> > > > > > +	else
> > > > > > +		return CMDQ_THR_DISP_MISC_IDX;
> > > > > > +}
> > > > > 
> > > > > I think cmdq should not have knowledge of client. These statement show
> > > > > that cmdq know that DSI0-tasks is different with DPI0-tasks. I propose
> > > > > the 'session' to replace engine flag. For example, main display create
> > > > > one cmdq_session and external display create another cmdq_session. For
> > > > > client driver, every tasks created by main display is bound to main
> > > > > display session. For cmdq driver, it should dynamically bind a session
> > > > > to a HW thread, and then dispatch tasks of this session to this HW
> > > > > thread. After HW thread run out of tasks of this session, detach this
> > > > > session with this thread.
> > > > > For the problem of remove wfe cmd, I think a session can have a property
> > > > > of merge_wfe_cmd. For display session, session->merge_wfe_cmd = true.
> > > > > For other client, it's false.
> > > > 
> > > > Hi CK,
> > > > 
> > > > I think your suggestion is similar to CMDQ 'scenarios',
> > > > which was removed from CMDQ v2.
> > > > 
> > > > Daniel suggests to use engine flags instead of scenarios.
> > > > Quote from https://patchwork.kernel.org/patch/8068311/ .
> > > > 'Instead of encoding policy (these arbitrary "scenarios"), perhaps the
> > > >  cmdq driver should just provide these flag bits, and the display
> > > >  subsystem can use them to build the "flag" parameter itself.
> > > > 
> > > >  After all, the exact configuration of mmsys components is somewhat
> > > >  flexible.'
> > > > 
> > > > Therefore, it would be better to discuss with Daniel before we change
> > > > it.
> > > > 
> > > > 
> > > > Hi Daniel,
> > > > 
> > > > Do you think we should use scenarios or sessions instead of flags?
> > > > 
> > > > Thanks,
> > > > HS
> > > > 
> > > 
> > > Hi, HS:
> > > 
> > > 'session' is not similar to 'scenarios'.
> > > 
> > > In 'scenarios' mechanism, client bind a task with scenarios and send to
> > > cmdq. Cmdq transfer scenarios to engine flag, and use engine flag to
> > > dispatch task to HW thread.
> > > 
> > > 
> > > In 'engine flag' mechanism, proposed by Daniel, client bind a task
> > > directly with engine flag. Cmdq directly use engine flag to dispatch
> > > task to HW thread without any translation.
> > > 
> > > But neither 'scenarios' mechanism nor 'engine flag' mechanism get rid of
> > > engine flag, which make cmdq have knowledge of client.
> > > 
> > > In 'session' mechanism, there is no engine flag any more. Client bind
> > > time-sequential tasks to the same session and tasks in different session
> > > can execute parallelly. One thing cmdq need to know is to dispatch tasks
> > > with the same session to the same HW thread, so cmdq does not have any
> > > knowledge of client.
> > > 
> > > Daniel focus on reduce translating scenarios to engine flag. I think
> > > 'session' mechanism does not conflict with his opinion because we does
> > > not translate 'session' to engine flag. Therefore, I think 'session' is
> > > the best of these three mechanism.
> > > 
> > > Regards,
> > > CK
> > 
> > Hi CK,
> > 
> > 'Session' looks like a group of options for CMDQ.
> > CMDQ driver can just follow the options to run its flow,
> > and doesn't need to know its client(s).
> > 
> > We don't have many options now, but it has good flexibility to extend
> > for future requirements.
> > 
> > I will add it in next version.
> > 
> > Thanks,
> > HS
> 
> Hi CK,
> 
> I think session is very similar to mailbox channel.
> We can treat session's parameters as channel's arguments in device tree.
> Linking session to GCE thread is also just like linking channel to GCE
> thread.
> Because I will use mailbox framework in CMDQ v9, we can use mailbox
> channel instead of session.
> What do you think?
> 
> Thanks,
> HS
> 

Hi, HS:

I'm not familiar with mailbox, but this sounds good to me.

Regards,
CK

> > > > > Here is the sample code to create cmdq_rec with session.
> > > > > 
> > > > > merge_wfe_cmd = true;
> > > > > cmdq_session_create(merge_wfe_cmd, &primary_display_session);
> > > > > cmdq_rec_create(dev, primary_display_session, &rec);
> > > > > 
> > > > > 
> > > > > Therefore, the below definition can be removed.
> > > > > 
> > > > > > +
> > > > > > +enum cmdq_eng {
> > > > > > +	CMDQ_ENG_DISP_AAL,
> > > > > > +	CMDQ_ENG_DISP_COLOR0,
> > > > > > +	CMDQ_ENG_DISP_COLOR1,
> > > > > > +	CMDQ_ENG_DISP_DPI0,
> > > > > > +	CMDQ_ENG_DISP_DSI0,
> > > > > > +	CMDQ_ENG_DISP_DSI1,
> > > > > > +	CMDQ_ENG_DISP_GAMMA,
> > > > > > +	CMDQ_ENG_DISP_OD,
> > > > > > +	CMDQ_ENG_DISP_OVL0,
> > > > > > +	CMDQ_ENG_DISP_OVL1,
> > > > > > +	CMDQ_ENG_DISP_PWM0,
> > > > > > +	CMDQ_ENG_DISP_PWM1,
> > > > > > +	CMDQ_ENG_DISP_RDMA0,
> > > > > > +	CMDQ_ENG_DISP_RDMA1,
> > > > > > +	CMDQ_ENG_DISP_RDMA2,
> > > > > > +	CMDQ_ENG_DISP_UFOE,
> > > > > > +	CMDQ_ENG_DISP_WDMA0,
> > > > > > +	CMDQ_ENG_DISP_WDMA1,
> > > > > > +	CMDQ_ENG_MAX,
> > > > > > +};
> > > > > > +
> > > > > 
> > > > > 
> > > > > Regards,
> > > > > CK
> 
> 





More information about the linux-arm-kernel mailing list