[PATCH 10/21] usb: chipidea: msm: Rely on core to override AHBBURST

[Stephen Boyd]

The core framework already handles setting this parameter with a
platform quirk. Add the appropriate flag so that we always set
AHBBURST to 0. Technically DT should be doing this, but we always
do it for msm chipidea devices so setting the flag in the driver
works just as well.

Cc: Peter Chen <peter.chen at nxp.com>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd at linaro.org>
---
 drivers/usb/chipidea/ci_hdrc_msm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 3889809fd0c4..37591a4b1346 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -24,7 +24,6 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 	switch (event) {
 	case CI_HDRC_CONTROLLER_RESET_EVENT:
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
-		writel(0, USB_AHBBURST);
 		/* use AHB transactor, allow posted data writes */
 		writel(0x8, USB_AHBMODE);
 		usb_phy_init(ci->usb_phy);
@@ -47,7 +46,8 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
 	.name			= "ci_hdrc_msm",
 	.capoffset		= DEF_CAPOFFSET,
 	.flags			= CI_HDRC_REGS_SHARED |
-				  CI_HDRC_DISABLE_STREAMING,
+				  CI_HDRC_DISABLE_STREAMING |
+				  CI_HDRC_OVERRIDE_AHB_BURST,
 
 	.notify_event		= ci_hdrc_msm_notify_event,
 };
-- 
2.9.0.rc2.8.ga28705d