[PATCH v4 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
Tai Tri Nguyen
ttnguyen at apm.com
Sat Jun 25 10:54:20 PDT 2016
Hi Mark,
On Thu, Jun 23, 2016 at 7:32 AM, Mark Rutland <mark.rutland at arm.com> wrote:
>
> Hi,
>
> On Wed, Jun 22, 2016 at 11:06:58AM -0700, Tai Nguyen wrote:
> > diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> > index 04e2653..be597dd 100644
> > --- a/drivers/perf/Kconfig
> > +++ b/drivers/perf/Kconfig
> > @@ -12,4 +12,11 @@ config ARM_PMU
> > Say y if you want to use CPU performance monitors on ARM-based
> > systems.
> >
> > +config XGENE_PMU
> > + depends on PERF_EVENTS && ARCH_XGENE
> > + bool "APM SoC X-Gene PMU"
>
> Nit: make this "APM X-Gene SoC PMU"
Okay
>
>
> > + default n
> > + help
> > + Say y if you want to use APM X-Gene SOC performance monitors.
>
> Nit: s/SOC/SoC/ for consistency.
>
Okay
> [...]
>
> > +#include <linux/acpi.h>
> > +#include <linux/clk.h>
> > +#include <linux/cpumask.h>
> > +#include <linux/efi.h>
>
> Looking at the driver, I don't see any reason you need linux/efi.h, and
> I can't imagine why this driver would care about EFI. Please drop that
> include.
>
> The other includes look fine.
You're right. I'll drop it.
>
> > +#define PMU_MAX_COUNTERS 4
> > +#define PMU_CNT_MAX_VAL 0x100000000ULL
>
> I was a little confused by this. Please s/VAL/PERIOD/ (as the maximum
> *value* will be 0xFFFFFFFF).
Okay, I'll change it
>
> > +#define _GET_CNTR(ev) (ev->hw.extra_reg.reg)
> > +#define _GET_EVENTID(ev) (ev->hw.config & 0xFFULL)
> > +#define _GET_AGENTID(ev) (ev->hw.extra_reg.config & 0xFFFFFFFFULL)
> > +#define _GET_AGENT1ID(ev) ((ev->hw.extra_reg.config >> 32) & 0xFFFFFFFFULL)
>
> I don't think you need to use the extra_reg fields for this. It's a
> little bit confusing to use them, as the extra_reg (and branch_reg)
> fields are for separately allocated PMU state.
>
> _GET_CNTR can use hw_perf_event::idx, and _GET_AGENT*_ID can use
> config_base.
I need a 64 bit field for GET_AGENT*ID. The config_base is only 32 bit.
Can you please suggest another field?
For _GET_CNTR, yes I'll use hw::idx.
>
> > +struct xgene_pmu_dev {
> > + struct hw_pmu_info *inf;
> > + struct xgene_pmu *parent;
> > + struct pmu pmu;
> > + u8 max_counters;
> > + DECLARE_BITMAP(cntr_assign_mask, PMU_MAX_COUNTERS);
> > + raw_spinlock_t lock;
> > + u64 max_period;
> > + const struct attribute_group **attr_groups;
> > + struct perf_event *pmu_counter_event[4];
> > +};
>
> I believe that the 4 should be PMU_MAX_COUNTERS, to match the bitmap.
>
Will fix it.
> [...]
>
> > +#define XGENE_PMU_FORMAT_ATTR(_name, _config) \
> > + struct dev_ext_attribute pmu_format_attr_##_name = \
> > + { __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), _config }
> > +
> > +static XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7");
> > +static XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9");
> > +static XGENE_PMU_FORMAT_ATTR(iob_eventid, "config:0-7");
> > +static XGENE_PMU_FORMAT_ATTR(iob_agentid, "config1:0-63");
> > +static XGENE_PMU_FORMAT_ATTR(mcb_eventid, "config:0-5");
> > +static XGENE_PMU_FORMAT_ATTR(mcb_agentid, "config1:0-9");
> > +static XGENE_PMU_FORMAT_ATTR(mc_eventid, "config:0-28");
> > +
> > +static const struct attribute *l3c_pmu_format_attrs[] = {
> > + &pmu_format_attr_l3c_eventid.attr.attr,
> > + &pmu_format_attr_l3c_agentid.attr.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute *iob_pmu_format_attrs[] = {
> > + &pmu_format_attr_iob_eventid.attr.attr,
> > + &pmu_format_attr_iob_agentid.attr.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute *mcb_pmu_format_attrs[] = {
> > + &pmu_format_attr_mcb_eventid.attr.attr,
> > + &pmu_format_attr_mcb_agentid.attr.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute *mc_pmu_format_attrs[] = {
> > + &pmu_format_attr_mc_eventid.attr.attr,
> > + NULL,
> > +};
>
> As mentioned before, you can use compound literals for these and avoid
> the redundancy. There is a trick to this, which I didn't explain last
> time. You need to update XGENE_PMU_FORMAT_ATTR to match what we do in
> the arm-cci driver for CCI_EXT_ATTR_ENTRY, using a single element array
> to allow the compiler to statically allocate an anonymous struct and
> generate a pointer to a sub-field at compile time. e.g.
>
> #define XGENE_PMU_FORMAT_ATTR(_name, _config) \
> &((struct dev_ext_attribute[]) { \
> { __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), _config } \
> })[0].attr.attr
>
> static struct attribute *l3c_pmu_format_attrs[] = {
> XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7"),
> XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9"),
> NULL,
> };
Thanks, I'll make change as per your suggestion.
>
> > +static const struct attribute_group l3c_pmu_format_attr_group = {
> > + .name = "format",
> > + .attrs = (struct attribute **) l3c_pmu_format_attrs,
> > +};
>
> I see based on that suspicious cast that attribute_group::attrs isn't
> const, and so we're throwing away the constness of
> xgene_pmu_cpumask_attrs here. I didn't realise that when I suggested
> making the structures const; sorry for the bad advice in the last round
> of review.
>
> Forcefully casting away const isn't a great idea. For the timebeing,
> please drop any casts which throw away const, and remove the instances
> of const that made those necessary.
>
Yes, I agree.
> > +#define XGENE_PMU_EVENT_ATTR(_name) \
> > + __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL)
> > +#define XGENE_PMU_EVENT(_name, _config) { \
> > + .attr = XGENE_PMU_EVENT_ATTR(_name), \
> > + .config = _config, }
> > +
> > +static const struct xgene_pmu_event l3c_pmu_events[] = {
> > + XGENE_PMU_EVENT(cycle-count, 0x00),
> > + XGENE_PMU_EVENT(cycle-count-div-64, 0x01),
> > + XGENE_PMU_EVENT(read-hit, 0x02),
> > + XGENE_PMU_EVENT(read-miss, 0x03),
> > + XGENE_PMU_EVENT(write-need-replacement, 0x06),
> > + XGENE_PMU_EVENT(write-not-need-replacement, 0x07),
> > + XGENE_PMU_EVENT(tq-full, 0x08),
> > + XGENE_PMU_EVENT(ackq-full, 0x09),
> > + XGENE_PMU_EVENT(wdb-full, 0x0a),
> > + XGENE_PMU_EVENT(bank-fifo-full, 0x0b),
> > + XGENE_PMU_EVENT(odb-full, 0x0c),
> > + XGENE_PMU_EVENT(wbq-full, 0x0d),
> > + XGENE_PMU_EVENT(bank-conflict-fifo-issue, 0x0e),
> > + XGENE_PMU_EVENT(bank-fifo-issue, 0x0f),
> > +};
>
> [...]
>
> > +/* Populated in xgene_pmu_probe */
> > +static struct attribute *l3c_pmu_events_attrs[ARRAY_SIZE(l3c_pmu_events) + 1];
> > +static struct attribute *iob_pmu_events_attrs[ARRAY_SIZE(iob_pmu_events) + 1];
> > +static struct attribute *mcb_pmu_events_attrs[ARRAY_SIZE(mcb_pmu_events) + 1];
> > +static struct attribute *mc_pmu_events_attrs[ARRAY_SIZE(mc_pmu_events) + 1];
>
> As with the other attributes above, please use the CCI_EXT_ATTR_ENTRY
> trick to initialise these at compile time, rather than initialising this
> in xgene_pmu_probe. e.g.
>
> #define XGENE_PMU_EVENT_ATTR(_name, _config) \
> &((struct xgene_pmu_event[]) {{ \
> .attr = __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL), \
> .config = _config, \
> }})[0].attr.attr
>
> static struct attribute *l3c_pmu_events_attrs[] = {
> XGENE_PMU_EVENT_ATTR(cycle-count, 0x00),
> XGENE_PMU_EVENT_ATTR(cycle-count-div-64, 0x01),
> XGENE_PMU_EVENT_ATTR(read-hit, 0x02),
> XGENE_PMU_EVENT_ATTR(read-miss, 0x03),
> XGENE_PMU_EVENT_ATTR(write-need-replacement, 0x06),
> XGENE_PMU_EVENT_ATTR(write-not-need-replacement, 0x07),
> XGENE_PMU_EVENT_ATTR(tq-full, 0x08),
> XGENE_PMU_EVENT_ATTR(ackq-full, 0x09),
> XGENE_PMU_EVENT_ATTR(wdb-full, 0x0a),
> XGENE_PMU_EVENT_ATTR(bank-fifo-full, 0x0b),
> XGENE_PMU_EVENT_ATTR(odb-full, 0x0c),
> XGENE_PMU_EVENT_ATTR(wbq-full, 0x0d),
> XGENE_PMU_EVENT_ATTR(bank-conflict-fifo-issue, 0x0e),
> XGENE_PMU_EVENT_ATTR(bank-fifo-issue, 0x0f),
> NULL,
> };
Got it. I'll do the same as format attribute groups
>
> > + /*
> > + * Each bit of the config1 field represents an agent from which the
> > + * request of the event come. The event is counted only if it's caused
> > + * by a request of an agent has the bit set.
> > + * By default, the event is counted for all agents.
> > + */
> > + if (config1)
> > + hwc->extra_reg.config = config1;
> > + else
> > + hwc->extra_reg.config = 0xFFFFFFFFFFFFFFFFULL;
>
> Previously I asked you to invert the meaning of this, such that the
> default would be to match all masters.
>
> I understand that in HW, you need to write 0xFFFFFFFFFFFFFFFF to match
> all masters, as you mentioned in your last reply. The simple way to
> handle that is to bitwise invert the value when writing it to HW , i.e.
> write ~(hwc->extra_reg.config). Please do so, updating the documentation
> appropriately.
>
Okay. I'll do so.
> [...]
>
> > +static int xgene_perf_add(struct perf_event *event, int flags)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > + struct hw_perf_event *hw = &event->hw;
> > +
> > + event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
>
> Please either use event->hw.field or hw->field consistently.
Okay, will fix it consistently.
>
> > +
> > + /* Allocate an event counter */
> > + hw->idx = get_next_avail_cntr(pmu_dev);
> > + if (hw->idx < 0)
> > + return -EAGAIN;
> > +
> > + event->hw.extra_reg.reg = (u16) hw->idx;
>
> That cast shouldn't be necessary, given idx will be between 0 and 4, and
> reg is an unsigned int.
>
> Given this is already in hw->idx, what is the benefit of duplicating this?
>
> You can get rid of this line if you change _GET_CNTR to return
> ev->hw.idx.
Yes, I'll fix it.
>
> > +
> > + if (flags & PERF_EF_START)
> > + xgene_perf_start(event, PERF_EF_RELOAD);
> > +
> > + /* Update counter event pointer for Interrupt handler */
> > + pmu_dev->pmu_counter_event[hw->idx] = event;
>
> Are interrupts guaranteed to be disabled here, or should these be
> swapped? Otherwise, what happens if an interrupt comes in before we
> updated this pointer?
Right. Naturally, this should be updated before starting perf event.
I'll swap these. Thanks for catching it.
>
> > +
> > + return 0;
> > +}
> > +
> > +static void xgene_perf_del(struct perf_event *event, int flags)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > +
> > + xgene_perf_stop(event, PERF_EF_UPDATE);
> > +
> > + /* clear the assigned counter */
> > + clear_avail_cntr(pmu_dev, _GET_CNTR(event));
> > +
> > + perf_event_update_userpage(event);
> > +}
>
> It would be a good idea to remove the dangling pmu_dev->pmu_counter_event
> pointer, even if not strictly required.
Sure, I'll reset it to NULL.
>
> > +
> > +static u64 xgene_perf_event_update(struct perf_event *event)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > + struct hw_perf_event *hwc = &event->hw;
> > + u64 delta, prev_raw_count, new_raw_count;
> > +
> > +again:
> > + prev_raw_count = local64_read(&hwc->prev_count);
> > + new_raw_count = pmu_dev->max_period;
>
> I don't understand this. Why are we not reading the counter here?
>
> This means that the irq handler won't be reading the counter, which
> means we're throwing away events, and I suspect other cases are broken
> too.
>
When the overflow interrupt occurs, the PMU counter wraps to 0 and
continues to run.
This event_update function is called only to handle the The PMU
counter overflow interrupt occurs.
I'm assuming that when the overflow happens, the read back counter
value is the max period.
Is this assumption incorrect? Do you have any suggestion what I should
do. Because if I read the counter register,
it returns the minor wrapped around value.
Or should it be: new_count = counter read + max period?
> > +
> > + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
> > + new_raw_count) != prev_raw_count)
> > + goto again;
> > +
> > + delta = (new_raw_count - prev_raw_count) & pmu_dev->max_period;
> > +
> > + local64_add(delta, &event->count);
> > + local64_sub(delta, &hwc->period_left);
>
> Given we aren't sampling, does the period left matter? It looks like
> drivers are inconsistent w.r.t. this, and I'm not immediately sure :(
>
I tried to drop it and the perf event count still works properly for me.
I'll remove it.
> > +
> > + return new_raw_count;
> > +}
> > +
> > +static int xgene_perf_event_set_period(struct perf_event *event)
> > +{
> > + struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
> > + struct hw_perf_event *hwc = &event->hw;
> > + s64 left = local64_read(&hwc->period_left);
> > + s64 period = hwc->sample_period;
> > + int ret = 0;
> > +
> > + if (unlikely(left <= -period)) {
> > + left = period;
> > + local64_set(&hwc->period_left, left);
> > + hwc->last_period = period;
> > + ret = 1;
> > + }
> > +
> > + if (unlikely(left <= 0)) {
> > + left += period;
> > + local64_set(&hwc->period_left, left);
> > + hwc->last_period = period;
> > + ret = 1;
> > + }
> > +
> > + /*
> > + * Limit the maximum period to prevent the counter value
> > + * from overtaking the one we are about to program. In
> > + * effect we are reducing max_period to account for
> > + * interrupt latency (and we are being very conservative).
> > + */
> > + if (left > (pmu_dev->max_period >> 1))
> > + left = pmu_dev->max_period >> 1;
> > +
> > + local64_set(&hwc->prev_count, (u64) -left);
> > +
> > + xgene_pmu_write_counter(pmu_dev, hwc->idx, (u64)(-left) & 0xffffffff);
> > +
> > + perf_event_update_userpage(event);
> > +
> > + return ret;
> > +}
>
> Given the lack of sampling, I suspect that you can simply follow what
> the arm-cci driver does, and always use exactly half a max period.
Okay, I'll refer to the arm-cci driver.
>
> [...]
>
> > +static irqreturn_t _xgene_pmu_isr(int irq, struct xgene_pmu_dev *pmu_dev)
> > +{
> > + struct xgene_pmu *xgene_pmu = pmu_dev->parent;
> > + u32 pmovsr;
> > + int idx;
> > +
> > + pmovsr = readl(pmu_dev->inf->csr + PMU_PMOVSR) & PMU_OVERFLOW_MASK;
> > + /* Clear interrupt flag */
> > + if (xgene_pmu->version == PCP_PMU_V1)
> > + writel(0x0, pmu_dev->inf->csr + PMU_PMOVSR);
> > + else
> > + writel(pmovsr, pmu_dev->inf->csr + PMU_PMOVSR);
> > +
> > + if (!pmovsr)
> > + return IRQ_NONE;
> > +
> > + for (idx = 0; idx < PMU_MAX_COUNTERS; idx++) {
> > + struct perf_event *event = pmu_dev->pmu_counter_event[idx];
> > + int overflowed = pmovsr & BIT(idx);
> > +
> > + /* Ignore if we don't have an event. */
> > + if (!event || !overflowed)
> > + continue;
> > + xgene_perf_event_update(event);
> > + xgene_perf_event_set_period(event);
>
> As I mentioned earlier, the lack of a counter read in
> xgene_perf_event_update() means this is broken.
>
Please see above.
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
> > +{
> > + struct xgene_pmu_dev_ctx *ctx, *temp_ctx;
> > + struct xgene_pmu *xgene_pmu = dev_id;
> > + u32 val;
> > +
> > + xgene_pmu_mask_int(xgene_pmu);
>
> Why do you need to mask the IRQ? This handler is called in hard IRQ
> context.
>
Right. Let me change to use raw_spin_lock_irqsave here.
> > +
> > + /* Get Interrupt PMU source */
> > + val = readl(xgene_pmu->pcppmu_csr + PCPPMU_INTSTATUS_REG)
> > + & PCPPMU_INTMASK;
>
> I don't think you need the mask here, given you only test masks below.
> I think that can be removed.
>
> Otherwise, please leave the '&' dangling on the first line.
Right, this is not necessary. I'll remove it.
>
> > + if (val & PCPPMU_INT_MCU) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->mcpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > + if (val & PCPPMU_INT_MCB) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->mcbpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > + if (val & PCPPMU_INT_L3C) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->l3cpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > + if (val & PCPPMU_INT_IOB) {
> > + list_for_each_entry_safe(ctx, temp_ctx,
> > + &xgene_pmu->iobpmus, next) {
> > + _xgene_pmu_isr(irq, ctx->pmu_dev);
> > + }
> > + }
> > +
> > + xgene_pmu_unmask_int(xgene_pmu);
> > +
> > + return IRQ_HANDLED;
> > +}
>
> [...]
>
> > + /* Populate PMU event atrribute arrays */
> > + for (i = 0; i < ARRAY_SIZE(l3c_pmu_events); i++)
> > + l3c_pmu_events_attrs[i] =
> > + (struct attribute *) &l3c_pmu_events[i].attr.attr;
> > + for (i = 0; i < ARRAY_SIZE(iob_pmu_events); i++)
> > + iob_pmu_events_attrs[i] =
> > + (struct attribute *) &iob_pmu_events[i].attr.attr;
> > + for (i = 0; i < ARRAY_SIZE(mcb_pmu_events); i++)
> > + mcb_pmu_events_attrs[i] =
> > + (struct attribute *) &mcb_pmu_events[i].attr.attr;
> > + for (i = 0; i < ARRAY_SIZE(mc_pmu_events); i++)
> > + mc_pmu_events_attrs[i] =
> > + (struct attribute *) &mc_pmu_events[i].attr.attr;
>
> As mentioend earlier, you can do this at compile time. Please do.
Yes, I'll do so.
Thanks,
--
Tai
More information about the linux-arm-kernel
mailing list