[PATCH 2/4] soc: fsl: add GUTS driver for QorIQ platforms

Yangbo Lu yangbo.lu at nxp.com
Wed Jun 22 19:46:10 PDT 2016


Hi Arnd,

Could you comment on these?
Thanks.


Best regards,
Yangbo Lu


> -----Original Message-----
> From: Scott Wood [mailto:oss at buserror.net]
> Sent: Saturday, June 11, 2016 9:51 AM
> To: Arnd Bergmann; linuxppc-dev at lists.ozlabs.org
> Cc: Mark Rutland; Ulf Hansson; linux-kernel at vger.kernel.org; linux-
> i2c at vger.kernel.org; linux-clk at vger.kernel.org; Qiang Zhao; Russell King;
> Bhupesh Sharma; Joerg Roedel; Claudiu Manoil; devicetree at vger.kernel.org;
> Kumar Gala; Rob Herring; Santosh Shilimkar; linux-arm-
> kernel at lists.infradead.org; netdev at vger.kernel.org; linux-
> mmc at vger.kernel.org; Xiaobo Xie; Yang-Leo Li; iommu at lists.linux-
> foundation.org; Yangbo Lu
> Subject: Re: [PATCH 2/4] soc: fsl: add GUTS driver for QorIQ platforms
> 
> On Thu, 2016-06-02 at 10:43 +0200, Arnd Bergmann wrote:
> > On Wednesday, June 1, 2016 8:47:22 PM CEST Scott Wood wrote:
> > > On Mon, 2016-05-30 at 15:15 +0200, Arnd Bergmann wrote:
> > > > diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c new
> > > > file mode 100644 index 000000000000..2f30698f5bcf
> > > > --- /dev/null
> > > > +++ b/drivers/soc/fsl/guts.c
> > > > @@ -0,0 +1,130 @@
> > > > +/*
> > > > + * Freescale QorIQ Platforms GUTS Driver
> > > > + *
> > > > + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> > > > + *
> > > > + * This program is free software; you can redistribute it and/or
> > > > +modify
> > > > + * it under the terms of the GNU General Public License as
> > > > +published by
> > > > + * the Free Software Foundation; either version 2 of the License,
> > > > +or
> > > > + * (at your option) any later version.
> > > > + */
> > > > +
> > > > +#include <linux/io.h>
> > > > +#include <linux/platform_device.h> #include <linux/module.h>
> > > > +#include <linux/slab.h> #include <linux/of_address.h> #include
> > > > +<linux/of_platform.h> #include <linux/sys_soc.h>
> > > > +
> > > > +#define GUTS_PVR	0x0a0
> > > > +#define GUTS_SVR	0x0a4
> > > > +
> > > > +struct guts {
> > > > +	void __iomem *regs;
> > >
> > > We already have a struct to define guts.  Why are you not using it?
> > > Why do you consider using it to be "abuse"?  What if we want to move
> > > more guts functionality into this driver?
> >
> > This structure was in the original patch, I left it in there, only
> > removed the inclusion of the powerpc header file, which seemed to be
> > misplaced.
> 
> I'm not refering "struct guts".  I'm referring to changing "struct
> ccsr_guts __iomem *regs" into "void __iomem *regs".
> 
> And it's not a powerpc header file.
> 
> > > > +/*
> > > > + * Table for matching compatible strings, for device tree
> > > > + * guts node, for Freescale QorIQ SOCs.
> > > > + */
> > > > +static const struct of_device_id fsl_guts_of_match[] = {
> > > > +	/* For T4 & B4 Series SOCs */
> > > > +	{ .compatible = "fsl,qoriq-device-config-1.0", .data = "T4/B4
> > > > series" },
> > > [snip]
> > > > +	{ .compatible = "fsl,qoriq-device-config-2.0", .data = "P
> > > > series"
> > >
> > > As noted in my comment on patch 3/4, these descriptions are reversed.
> > >
> > > They're also incomplete.  t2080 has device config 2.0.  t1040 is
> > > described as
> > > 2.0 though it should probably be 2.1 (or better, drop the generic
> > > compatible altogether).
> >
> > Ok. Ideally I think we'd even look up the specific SoC names from the
> > SVC rather than the compatible string. I just didn't have a good list
> > for those to put in the driver.
> 
> The list is in arch/powerpc/include/asm/mpc85xx.h but I don't know why we
> need to convert it to a string in the first place.
> 
> >
> > > > +	/*
> > > > +	 * syscon devices default to little-endian, but on powerpc we
> > > > have
> > > > +	 * existing device trees with big-endian maps and an absent
> > > > endianess
> > > > +	 * "big-property"
> > > > +	 */
> > > > +	if (!IS_ENABLED(CONFIG_POWERPC) &&
> > > > +	    !of_property_read_bool(dev->of_node, "big-endian"))
> > > > +		guts->little_endian = true;
> > >
> > > This is not a syscon device (Yangbo's patch to add a guts node on
> > > ls2080 is the only guts node that says "syscon", and that was a
> > > leftover from earlier revisions and should probably be removed).
> > > Even if it were, where is it documented that syscon defaults to
> > > little-endian?
> >
> > Documentation/devicetree/bindings/regmap/regmap.txt
> >
> > We had a little screwup here, basically regmap (and by consequence,
> > syscon) always defaulted to little-endian way before that was
> > documented, so it's too late to change it,
> 
> What causes a device node to fall under the jurisdiction of regmap.txt?
>  Again, these nodes do not claim "syscon" compatibility.
> 
> > although I agree it would have made sense to document regmap to
> > default to big-endian on powerpc.
> 
> Please don't.  It's enough of a mess as is; no need to start throwing in
> architecture ifdefs.
> 
> > > Documentation/devicetree/bindings/common-properties.txt says that
> > > the individual binding specifies the default.  The default for this
> > > node should be big-endian because that's what existed before there
> > > was a need to describe the endianness.  And we need an update to the
> > > guts binding to specify that.
> >
> > Good point. This proably means that specifying both the "guts" and
> "syscon"
> > compatible strings implies having to also specify the endianess
> > explicitly both ways, because otherwise we break one of the two
> bindings.
> 
> Yes, but the node should only specify "guts".
> 
> >
> > > > +
> > > > +	guts->regs = devm_ioremap_resource(dev, 0);
> > > > +	if (!guts->regs) {
> > > > +		ret = -ENOMEM;
> > > > +		kfree(guts);
> > > > +		goto out;
> > > > +	}
> > > > +
> > > > +	fsl_guts_init(dev, guts);
> > > > +	ret = 0;
> > > > +out:
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static struct platform_driver fsl_soc_guts = {
> > > > +	.probe = fsl_guts_probe,
> > > > +	.driver.of_match_table = fsl_guts_of_match, };
> > > > +
> > > > +module_platform_driver(fsl_soc_guts);
> > >
> > > Again, this means that the information is not available during early
> > > boot, such as in the clock driver.  Thus we would not be able to
> > > convert clk -qoriq's direct mfspr(SPRN_SVR) into an
> > > soc_device_match() (or anything else that makes use of this file),
> > > nor would we be able to move its access of the guts RCW registers
> > > into this driver.
> >
> > Correct. Do we have a reason to convert the mfspr() though? I don't
> > really see an improvement over the current state if we do that,
> 
> Then should we drop this patchset and put a similar PPC ifdef in
> drivers/mmc/host/sdhci-of-esdhc.c?
> 
> There's also the RCW access.  You said in the patch 4/4 discussion that
> you di dn't like any random driver ioremapping the registers...
> 
> > and for new devices
> > that might need the erratum workaround, we could add a DT property
> > that would be preferred to both.
> 
> It's unlikely that we would know the erratum exists at the time the
> device tree is created.  We also generally don't have separate device
> trees for each revision of a chip (and if we did, we'd have users that
> use the wrong one).
> 
> -Scott



More information about the linux-arm-kernel mailing list