[PATCH v3 4/4] ARM/PCI: remove arch specific pcibios_enable_device()

Bjorn Helgaas helgaas at kernel.org
Wed Jun 22 16:07:46 PDT 2016


[+cc Guan]

On Wed, Jun 08, 2016 at 12:04:50PM +0100, Lorenzo Pieralisi wrote:
> The arm pcibios_enable_device() implementation exists solely
> to prevent enabling PCI resources on PCI_PROBE_ONLY systems, since
> on those systems the PCI resources are currently not claimed (ie
> inserted in the PCI resource tree - which means their parent
> pointer is not correctly set-up) therefore they can not be enabled
> since this would trigger PCI set-ups failures.
> 
> After removing the pci=firmware command line option in:
> 
> commit 903589ca7165 ("ARM: 8554/1: kernel: pci: remove pci=firmware
> command line parameter handling")

903589ca7165 removed "pci=firmware" from ARM and from
Documentation/kernel-parameters.txt (where it was documented as
ARM-specific).

I think unicore32 copied that code from arm, so unicore32 is one of
the few remaining arches that can set PCI_PROBE_ONLY.  I suspect this
was just copied from arm and may not be necessary on unicore32.

Guan, can you confirm that PCI_PROBE_ONLY is necessary on unicore32,
or that it can be removed?

> (that was used to set the PCI_PROBE_ONLY flag through the command line)
> and by introducing resources claiming in the PCI host controllers
> set-ups that have PCI_PROBE_ONLY as a probe option, there is no need for
> arch specific pcibios_enable_device() implementations anymore in that
> the kernel can rely on the generic pcibios_enable_device()
> implementation without resorting to arch specific code to work around
> the missing resources claiming enumeration step.
> 
> On !PCI_PROBE_ONLY PCI bus set-ups, resources are always assigned
> either in pcibios initialization code or PCI host controllers drivers;
> since the PCI resource assignment API takes care of inserting the
> assigned resources in the resource tree, the resources parent pointers
> are correctly set-up, which means that this patch leaves behaviour
> unchanged for all arm PCI set-ups that do not set the PCI_PROBE_ONLY
> flag.
> 
> Remove the pcibios_enable_device() function from the arm arch back-end
> so that the kernel now uses its generic implementation.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> Acked-by: Will Deacon <will.deacon at arm.com>
> Cc: Arnd Bergmann <arnd at arndb.de>
> Cc: Will Deacon <will.deacon at arm.com>
> Cc: Bjorn Helgaas <bhelgaas at google.com>
> Cc: Russell King <linux at arm.linux.org.uk>
> ---
>  arch/arm/kernel/bios32.c | 12 ------------
>  1 file changed, 12 deletions(-)
> 
> diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
> index 05e61a2..488545f 100644
> --- a/arch/arm/kernel/bios32.c
> +++ b/arch/arm/kernel/bios32.c
> @@ -590,18 +590,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
>  	return start;
>  }
>  
> -/**
> - * pcibios_enable_device - Enable I/O and memory.
> - * @dev: PCI device to be enabled
> - */
> -int pcibios_enable_device(struct pci_dev *dev, int mask)
> -{
> -	if (pci_has_flag(PCI_PROBE_ONLY))
> -		return 0;
> -
> -	return pci_enable_resources(dev, mask);
> -}
> -
>  int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
>  			enum pci_mmap_state mmap_state, int write_combine)
>  {
> -- 
> 2.6.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



More information about the linux-arm-kernel mailing list