[PATCH 2/4] ARM: dts: imx7d-sdb: Add display support
Shawn Guo
shawnguo at kernel.org
Mon Jun 20 23:48:10 PDT 2016
On Fri, Jun 17, 2016 at 05:09:41PM -0300, Diego Dorta wrote:
> Add support for the LCD8000-43T display.
>
> Signed-off-by: Diego Dorta <diego.dorta at nxp.com>
> ---
> arch/arm/boot/dts/imx7d-sdb.dts | 84 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 84 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index d6da506..c9cf9b0 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -272,6 +272,45 @@
> };
> };
>
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat
> + &pinctrl_lcdif_ctrl>;
Do we have any particular reason to split the lcdif pins into two sets?
Shawn
> + display = <&display0>;
> + status = "okay";
> +
> + display0: display {
> + bits-per-pixel = <16>;
> + bus-width = <24>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> +
> + timing0: timing0 {
> + clock-frequency = <9200000>;
> + hactive = <480>;
> + vactive = <272>;
> + hfront-porch = <8>;
> + hback-porch = <4>;
> + hsync-len = <41>;
> + vback-porch = <2>;
> + vfront-porch = <4>;
> + vsync-len = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> &uart1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart1>;
> @@ -396,6 +435,51 @@
> >;
> };
>
> + pinctrl_lcdif_dat: lcdifdatgrp {
> + fsl,pins = <
> + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
> + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
> + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
> + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
> + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
> + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
> + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
> + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
> + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
> + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
> + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
> + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
> + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
> + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
> + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
> + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
> + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
> + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
> + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
> + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
> + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
> + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
> + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
> + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
> + >;
> + };
> +
> + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> + fsl,pins = <
> + MX7D_PAD_LCD_CLK__LCD_CLK 0x79
> + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
> + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
> + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
> + MX7D_PAD_LCD_RESET__LCD_RESET 0x79
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0
> + >;
> + };
> +
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list