[PATCH net-next 07/19] net: hns: select Hilink before serdes loopback for HNS V2

Yisen Zhuang Yisen.Zhuang at huawei.com
Mon Jun 20 20:56:27 PDT 2016


From: Kejian Yan <yankejian at huawei.com>

As Hilink3 and Hilink4 use the same xge training and xge u adaptor for
HNSv2, it needs to select which Hilink to be set before relative serdes
being configed. The hilink_access_sel is the register to do that.

Signed-off-by: Kejian Yan <yankejian at huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang at huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 26 +++++++++++++++++-----
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index 09e60d6..aff9d77 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -435,11 +435,6 @@ int hns_mac_get_sfp_prsnt(struct hns_mac_cb *mac_cb, int *sfp_prsnt)
  */
 static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en)
 {
-	/* port 0-3 hilink4 base is serdes_vaddr + 0x00280000
-	 * port 4-7 hilink3 base is serdes_vaddr + 0x00200000
-	 */
-	u8 *base_addr = (u8 *)mac_cb->serdes_vaddr +
-		       (mac_cb->mac_id <= 3 ? 0x00280000 : 0x00200000);
 	const u8 lane_id[] = {
 		0,	/* mac 0 -> lane 0 */
 		1,	/* mac 1 -> lane 1 */
@@ -465,11 +460,30 @@ static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en)
 	}
 
 	if (mac_cb->serdes_ctrl) {
-		u32 origin = dsaf_read_syscon(mac_cb->serdes_ctrl, reg_offset);
+		u32 origin;
+
+		if (!AE_IS_VER1(mac_cb->dsaf_dev->dsaf_ver)) {
+#define HILINK_ACCESS_SEL_CFG		0x40008
+			/* hilink4 & hilink3 use the same xge training and
+			 * xge u adaptor. There is a hilink access sel cfg
+			 * register to select which one to be configed
+			 */
+			if ((!HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) &&
+			    (mac_cb->mac_id <= 3))
+				dsaf_write_syscon(mac_cb->serdes_ctrl,
+						  HILINK_ACCESS_SEL_CFG, 0);
+			else
+				dsaf_write_syscon(mac_cb->serdes_ctrl,
+						  HILINK_ACCESS_SEL_CFG, 3);
+		}
+
+		origin = dsaf_read_syscon(mac_cb->serdes_ctrl, reg_offset);
 
 		dsaf_set_field(origin, 1ull << 10, 10, en);
 		dsaf_write_syscon(mac_cb->serdes_ctrl, reg_offset, origin);
 	} else {
+		u8 *base_addr = (u8 *)mac_cb->serdes_vaddr +
+				(mac_cb->mac_id <= 3 ? 0x00280000 : 0x00200000);
 		dsaf_set_reg_field(base_addr, reg_offset, 1ull << 10, 10, en);
 	}
 
-- 
1.9.1




More information about the linux-arm-kernel mailing list