[PATCH v3 2/5] i2c: Add STM32F4 I2C driver
M'boumba Cedric Madianga
cedric.madianga at gmail.com
Mon Jun 20 09:22:48 PDT 2016
This patch adds support for the STM32F4 I2C controller.
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga at gmail.com>
---
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-stm32f4.c | 863 +++++++++++++++++++++++++++++++++++++++
3 files changed, 874 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-stm32f4.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index faa8e68..805acf6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -873,6 +873,16 @@ config I2C_ST
This driver can also be built as module. If so, the module
will be called i2c-st.
+config I2C_STM32F4
+ tristate "STMicroelectronics STM32F4 I2C support"
+ depends on ARCH_STM32
+ help
+ Enable this option to add support for STM32 I2C controller embedded
+ in STM32F4 SoCs.
+
+ This driver can also be built as module. If so, the module
+ will be called i2c-stm32f4.
+
config I2C_STU300
tristate "ST Microelectronics DDC I2C interface"
depends on MACH_U300
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 37f2819..2ac0eb2 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o
obj-$(CONFIG_I2C_ST) += i2c-st.o
+obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o
obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
new file mode 100644
index 0000000..652d4bf
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -0,0 +1,863 @@
+/*
+ * Driver for STMicroelectronics STM32 I2C controller
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2015
+ * Author: M'boumba Cedric Madianga <cedric.madianga at gmail.com>
+ *
+ * This driver is based on st-i2c.c
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+/* STM32F4 I2C offset registers */
+#define STM32F4_I2C_CR1 0x00
+#define STM32F4_I2C_CR2 0x04
+#define STM32F4_I2C_DR 0x10
+#define STM32F4_I2C_SR1 0x14
+#define STM32F4_I2C_SR2 0x18
+#define STM32F4_I2C_CCR 0x1C
+#define STM32F4_I2C_TRISE 0x20
+#define STM32F4_I2C_FLTR 0x24
+
+/* STM32F4 I2C control 1*/
+#define STM32F4_I2C_CR1_SWRST BIT(15)
+#define STM32F4_I2C_CR1_POS BIT(11)
+#define STM32F4_I2C_CR1_ACK BIT(10)
+#define STM32F4_I2C_CR1_STOP BIT(9)
+#define STM32F4_I2C_CR1_START BIT(8)
+#define STM32F4_I2C_CR1_PE BIT(0)
+
+/* STM32F4 I2C control 2 */
+#define STM32F4_I2C_CR2_FREQ_MASK GENMASK(5, 0)
+#define STM32F4_I2C_CR2_FREQ(n) ((n & STM32F4_I2C_CR2_FREQ_MASK))
+#define STM32F4_I2C_CR2_ITBUFEN BIT(10)
+#define STM32F4_I2C_CR2_ITEVTEN BIT(9)
+#define STM32F4_I2C_CR2_ITERREN BIT(8)
+#define STM32F4_I2C_CR2_IRQ_MASK (STM32F4_I2C_CR2_ITBUFEN \
+ | STM32F4_I2C_CR2_ITEVTEN \
+ | STM32F4_I2C_CR2_ITERREN)
+
+/* STM32F4 I2C Status 1 */
+#define STM32F4_I2C_SR1_AF BIT(10)
+#define STM32F4_I2C_SR1_ARLO BIT(9)
+#define STM32F4_I2C_SR1_BERR BIT(8)
+#define STM32F4_I2C_SR1_TXE BIT(7)
+#define STM32F4_I2C_SR1_RXNE BIT(6)
+#define STM32F4_I2C_SR1_BTF BIT(2)
+#define STM32F4_I2C_SR1_ADDR BIT(1)
+#define STM32F4_I2C_SR1_SB BIT(0)
+#define STM32F4_I2C_SR1_ITEVTEN_MASK (STM32F4_I2C_SR1_BTF \
+ | STM32F4_I2C_SR1_ADDR \
+ | STM32F4_I2C_SR1_SB)
+#define STM32F4_I2C_SR1_ITBUFEN_MASK (STM32F4_I2C_SR1_TXE \
+ | STM32F4_I2C_SR1_RXNE)
+#define STM32F4_I2C_SR1_ITERREN_MASK (STM32F4_I2C_SR1_AF \
+ | STM32F4_I2C_SR1_ARLO \
+ | STM32F4_I2C_SR1_BERR)
+
+/* STM32F4 I2C Status 2 */
+#define STM32F4_I2C_SR2_BUSY BIT(1)
+
+/* STM32F4 I2C Control Clock */
+#define STM32F4_I2C_CCR_CCR_MASK GENMASK(11, 0)
+#define STM32F4_I2C_CCR_CCR(n) ((n & STM32F4_I2C_CCR_CCR_MASK))
+#define STM32F4_I2C_CCR_FS BIT(15)
+#define STM32F4_I2C_CCR_DUTY BIT(14)
+
+/* STM32F4 I2C Trise */
+#define STM32F4_I2C_TRISE_VALUE_MASK GENMASK(5, 0)
+#define STM32F4_I2C_TRISE_VALUE(n) ((n & STM32F4_I2C_TRISE_VALUE_MASK))
+
+/* STM32F4 I2C Filter */
+#define STM32F4_I2C_FLTR_DNF_MASK GENMASK(3, 0)
+#define STM32F4_I2C_FLTR_DNF(n) ((n & STM32F4_I2C_FLTR_DNF_MASK))
+#define STM32F4_I2C_FLTR_ANOFF BIT(4)
+
+#define STM32F4_I2C_MIN_FREQ 2
+#define STM32F4_I2C_MAX_FREQ 42
+#define FAST_MODE_MAX_RISE_TIME 1000
+#define STD_MODE_MAX_RISE_TIME 300
+#define MHZ_TO_HZ 1000000
+
+enum stm32f4_i2c_speed {
+ STM32F4_I2C_SPEED_STANDARD, /* 100 kHz */
+ STM32F4_I2C_SPEED_FAST, /* 400 kHz */
+ STM32F4_I2C_SPEED_END,
+};
+
+/**
+ * struct stm32f4_i2c_timings - per-Mode tuning parameters
+ * @duty: Fast mode duty cycle
+ * @mul_ccr: Value to be multiplied to CCR to reach 100Khz/400Khz SCL frequency
+ * @min_ccr: Minimum clock ctrl reg value to reach 100Khz/400Khz SCL frequency
+ */
+struct stm32f4_i2c_timings {
+ u32 rate;
+ u32 duty;
+ u32 mul_ccr;
+ u32 min_ccr;
+};
+
+/**
+ * struct stm32f4_i2c_client - client specific data
+ * @addr: 8-bit slave addr, including r/w bit
+ * @count: number of bytes to be transferred
+ * @buf: data buffer
+ * @result: result of the transfer
+ * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ */
+struct stm32f4_i2c_client {
+ u8 addr;
+ u32 count;
+ u8 *buf;
+ int result;
+ bool stop;
+};
+
+/**
+ * struct stm32f4_i2c_dev - private data of the controller
+ * @adap: I2C adapter for this controller
+ * @dev: device for this controller
+ * @base: virtual memory area
+ * @complete: completion of I2C message
+ * @irq_event: interrupt event line for the controller
+ * @irq_error: interrupt error line for the controller
+ * @clk: hw i2c clock
+ * speed: I2C clock frequency of the controller. Standard or Fast only supported
+ * @client: I2C transfer information
+ * @rst: I2C reset line
+ */
+struct stm32f4_i2c_dev {
+ struct i2c_adapter adap;
+ struct device *dev;
+ void __iomem *base;
+ struct completion complete;
+ int irq_event;
+ int irq_error;
+ struct clk *clk;
+ int speed;
+ struct stm32f4_i2c_client client;
+ struct reset_control *rst;
+};
+
+static struct stm32f4_i2c_timings i2c_timings[] = {
+ [STM32F4_I2C_SPEED_STANDARD] = {
+ .mul_ccr = 1,
+ .min_ccr = 4,
+ .duty = 0,
+ },
+ [STM32F4_I2C_SPEED_FAST] = {
+ .mul_ccr = 16,
+ .min_ccr = 1,
+ .duty = 1,
+ },
+};
+
+static inline void stm32f4_i2c_set_bits(void __iomem *reg, u32 mask)
+{
+ writel_relaxed(readl_relaxed(reg) | mask, reg);
+}
+
+static inline void stm32f4_i2c_clr_bits(void __iomem *reg, u32 mask)
+{
+ writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+}
+
+static void stm32f4_i2c_soft_reset(struct stm32f4_i2c_dev *i2c_dev)
+{
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1;
+
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_SWRST);
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_SWRST);
+}
+
+static void stm32f4_i2c_disable_it(struct stm32f4_i2c_dev *i2c_dev)
+{
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK);
+}
+
+static void stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 clk_rate, cr2, freq;
+
+ cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2);
+ cr2 &= ~STM32F4_I2C_CR2_FREQ_MASK;
+
+ clk_rate = clk_get_rate(i2c_dev->clk);
+ freq = clk_rate / MHZ_TO_HZ;
+
+ if (freq > STM32F4_I2C_MAX_FREQ)
+ freq = STM32F4_I2C_MAX_FREQ;
+ if (freq < STM32F4_I2C_MIN_FREQ)
+ freq = STM32F4_I2C_MIN_FREQ;
+
+ cr2 |= STM32F4_I2C_CR2_FREQ(freq);
+ writel_relaxed(cr2, i2c_dev->base + STM32F4_I2C_CR2);
+}
+
+static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 trise, freq, cr2, val;
+
+ cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2);
+ freq = cr2 & STM32F4_I2C_CR2_FREQ_MASK;
+
+ trise = readl_relaxed(i2c_dev->base + STM32F4_I2C_TRISE);
+ trise &= ~STM32F4_I2C_TRISE_VALUE_MASK;
+
+ /* Maximum rise time computation */
+ if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) {
+ trise |= STM32F4_I2C_TRISE_VALUE((freq + 1));
+ } else {
+ val = freq * FAST_MODE_MAX_RISE_TIME / STD_MODE_MAX_RISE_TIME;
+ trise |= STM32F4_I2C_TRISE_VALUE((val + 1));
+ }
+
+ writel_relaxed(trise, i2c_dev->base + STM32F4_I2C_TRISE);
+}
+
+static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_timings *t = &i2c_timings[i2c_dev->speed];
+ u32 ccr, clk_rate;
+ int val;
+
+ ccr = readl_relaxed(i2c_dev->base + STM32F4_I2C_CCR);
+ ccr &= ~(STM32F4_I2C_CCR_FS | STM32F4_I2C_CCR_DUTY |
+ STM32F4_I2C_CCR_CCR_MASK);
+
+ clk_rate = clk_get_rate(i2c_dev->clk);
+ val = clk_rate / MHZ_TO_HZ * t->mul_ccr;
+ if (val < t->min_ccr)
+ val = t->min_ccr;
+ ccr |= STM32F4_I2C_CCR_CCR(val);
+
+ if (t->duty)
+ ccr |= STM32F4_I2C_CCR_FS | STM32F4_I2C_CCR_DUTY;
+
+ writel_relaxed(ccr, i2c_dev->base + STM32F4_I2C_CCR);
+}
+
+static void stm32f4_i2c_set_filter(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 filter;
+
+ /* Enable analog noise filter and disable digital noise filter */
+ filter = readl_relaxed(i2c_dev->base + STM32F4_I2C_FLTR);
+ filter &= ~(STM32F4_I2C_FLTR_ANOFF | STM32F4_I2C_FLTR_DNF_MASK);
+ writel_relaxed(filter, i2c_dev->base + STM32F4_I2C_FLTR);
+}
+
+/**
+ * stm32f4_i2c_hw_config() - Prepare I2C block
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_hw_config(struct stm32f4_i2c_dev *i2c_dev)
+{
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1;
+
+ /* Disable I2C */
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_PE);
+
+ stm32f4_i2c_set_periph_clk_freq(i2c_dev);
+
+ stm32f4_i2c_set_rise_time(i2c_dev);
+
+ stm32f4_i2c_set_speed_mode(i2c_dev);
+
+ stm32f4_i2c_set_filter(i2c_dev);
+
+ /* Enable I2C */
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_PE);
+}
+
+static int stm32f4_i2c_wait_free_bus(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 status;
+ int ret;
+
+ ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F4_I2C_SR2,
+ status,
+ !(status & STM32F4_I2C_SR2_BUSY),
+ 10, 1000);
+ if (ret) {
+ dev_err(i2c_dev->dev, "bus not free\n");
+ ret = -EBUSY;
+ }
+
+ return ret;
+}
+
+/**
+ * stm32f4_i2c_write_ byte() - Write a byte in the data register
+ * @i2c_dev: Controller's private data
+ * @byte: Data to write in the register
+ */
+static void stm32f4_i2c_write_byte(struct stm32f4_i2c_dev *i2c_dev, u8 byte)
+{
+ writel_relaxed(byte, i2c_dev->base + STM32F4_I2C_DR);
+}
+
+/**
+ * stm32f4_i2c_write_msg() - Fill the data register in write mode
+ * @i2c_dev: Controller's private data
+ *
+ * This function fills the data register with I2C transfer buffer
+ */
+static void stm32f4_i2c_write_msg(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+
+ stm32f4_i2c_write_byte(i2c_dev, *c->buf++);
+ c->count--;
+}
+
+static void stm32f4_i2c_read_msg(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ u32 rbuf;
+
+ rbuf = readl_relaxed(i2c_dev->base + STM32F4_I2C_DR);
+ *c->buf++ = (u8)rbuf & 0xff;
+ c->count--;
+}
+
+static void stm32f4_i2c_terminate_xfer(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+ stm32f4_i2c_disable_it(i2c_dev);
+
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ if (c->stop)
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+ else
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+
+ complete(&i2c_dev->complete);
+}
+
+/**
+ * stm32f4_i2c_handle_write() - Handle FIFO empty interrupt in case of write
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_write(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+ if (c->count) {
+ stm32f4_i2c_write_msg(i2c_dev);
+ if (!c->count) {
+ /* Disable BUF interrupt */
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN);
+ }
+ } else {
+ stm32f4_i2c_terminate_xfer(i2c_dev);
+ }
+}
+
+/**
+ * stm32f4_i2c_handle_read() - Handle FIFO empty interrupt in case of read
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_read(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+ switch (c->count) {
+ case 1:
+ stm32f4_i2c_disable_it(i2c_dev);
+ stm32f4_i2c_read_msg(i2c_dev);
+ complete(&i2c_dev->complete);
+ break;
+ case 2:
+ case 3:
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN);
+ break;
+ default:
+ stm32f4_i2c_read_msg(i2c_dev);
+ }
+}
+
+/**
+ * stm32f4_i2c_handle_rx_btf() - Handle byte transfer finished interrupt
+ * in case of read
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_rx_btf(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg;
+ u32 mask;
+ int i;
+
+ switch (c->count) {
+ case 2:
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ /* Generate STOP or REPSTART */
+ if (c->stop)
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+ else
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+
+ /* Read two last data bytes */
+ for (i = 2; i > 0; i--)
+ stm32f4_i2c_read_msg(i2c_dev);
+
+ /* Disable EVT and ERR interrupt */
+ reg = i2c_dev->base + STM32F4_I2C_CR2;
+ mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN;
+ stm32f4_i2c_clr_bits(reg, mask);
+
+ complete(&i2c_dev->complete);
+ break;
+ case 3:
+ /* Enable ACK and read data */
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK);
+ stm32f4_i2c_read_msg(i2c_dev);
+ break;
+ default:
+ stm32f4_i2c_read_msg(i2c_dev);
+ }
+}
+
+/**
+ * stm32f4_i2c_handle_rx_addr() - Handle address matched interrupt in case of
+ * master receiver
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_rx_addr(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg;
+ u32 sr2;
+
+ switch (c->count) {
+ case 0:
+ stm32f4_i2c_terminate_xfer(i2c_dev);
+ /* Clear ADDR flag */
+ sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+ break;
+ case 1:
+ /*
+ * Single byte reception:
+ * Enable NACK, clear ADDR flag and generate STOP or RepSTART
+ */
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK);
+ sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+ if (c->stop)
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+ else
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+ break;
+ case 2:
+ /*
+ * 2-byte reception:
+ * Enable NACK and PEC Position Ack and clear ADDR flag
+ */
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK);
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_POS);
+ sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+ break;
+
+ default:
+ /* N-byte reception: Enable ACK and clear ADDR flag */
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_ACK);
+ sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+ break;
+ }
+}
+
+/**
+ * stm32f4_i2c_isr_event() - Interrupt routine for I2C bus event
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t stm32f4_i2c_isr_event(int irq, void *data)
+{
+ struct stm32f4_i2c_dev *i2c_dev = data;
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg;
+ u32 real_status, possible_status, ien, sr2;
+ int flag;
+
+ ien = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2);
+ ien &= STM32F4_I2C_CR2_IRQ_MASK;
+ possible_status = 0;
+
+ /* Check possible status combinations */
+ if (ien & STM32F4_I2C_CR2_ITEVTEN) {
+ possible_status = STM32F4_I2C_SR1_ITEVTEN_MASK;
+ if (ien & STM32F4_I2C_CR2_ITBUFEN)
+ possible_status |= STM32F4_I2C_SR1_ITBUFEN_MASK;
+ }
+
+ real_status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1);
+
+ if (!(real_status & possible_status)) {
+ dev_dbg(i2c_dev->dev,
+ "spurious evt it (status=0x%08x, ien=0x%08x)\n",
+ real_status, ien);
+ return IRQ_NONE;
+ }
+
+ /* Use __fls() to check error bits first */
+ flag = __fls(real_status & possible_status);
+
+ switch (1 << flag) {
+ case STM32F4_I2C_SR1_SB:
+ stm32f4_i2c_write_byte(i2c_dev, c->addr);
+ break;
+
+ case STM32F4_I2C_SR1_ADDR:
+ if (c->addr & I2C_M_RD)
+ stm32f4_i2c_handle_rx_addr(i2c_dev);
+ else
+ sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+
+ /* Enable ITBUF interrupts */
+ reg = i2c_dev->base + STM32F4_I2C_CR2;
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR2_ITBUFEN);
+ break;
+
+ case STM32F4_I2C_SR1_BTF:
+ if (c->addr & I2C_M_RD)
+ stm32f4_i2c_handle_rx_btf(i2c_dev);
+ else
+ stm32f4_i2c_handle_write(i2c_dev);
+ break;
+
+ case STM32F4_I2C_SR1_TXE:
+ stm32f4_i2c_handle_write(i2c_dev);
+ break;
+
+ case STM32F4_I2C_SR1_RXNE:
+ stm32f4_i2c_handle_read(i2c_dev);
+ break;
+
+ default:
+ dev_err(i2c_dev->dev,
+ "evt it unhandled: status=0x%08x)\n", real_status);
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_i2c_isr_error() - Interrupt routine for I2C bus error
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t stm32f4_i2c_isr_error(int irq, void *data)
+{
+ struct stm32f4_i2c_dev *i2c_dev = data;
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg;
+ u32 real_status, possible_status, ien;
+ int flag;
+
+ ien = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2);
+ ien &= STM32F4_I2C_CR2_IRQ_MASK;
+ possible_status = 0;
+
+ /* Check possible status combinations */
+ if (ien & STM32F4_I2C_CR2_ITERREN)
+ possible_status = STM32F4_I2C_SR1_ITERREN_MASK;
+
+ real_status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1);
+
+ if (!(real_status & possible_status)) {
+ dev_dbg(i2c_dev->dev,
+ "spurious err it (status=0x%08x, ien=0x%08x)\n",
+ real_status, ien);
+ return IRQ_NONE;
+ }
+
+ /* Use __fls() to check error bits first */
+ flag = __fls(real_status & possible_status);
+
+ switch (1 << flag) {
+ case STM32F4_I2C_SR1_BERR:
+ reg = i2c_dev->base + STM32F4_I2C_SR1;
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_BERR);
+ c->result = -EIO;
+ break;
+
+ case STM32F4_I2C_SR1_ARLO:
+ reg = i2c_dev->base + STM32F4_I2C_SR1;
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_ARLO);
+ c->result = -EAGAIN;
+ break;
+
+ case STM32F4_I2C_SR1_AF:
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+ c->result = -EIO;
+ break;
+
+ default:
+ dev_err(i2c_dev->dev,
+ "err it unhandled: status=0x%08x)\n", real_status);
+ return IRQ_NONE;
+ }
+
+ stm32f4_i2c_soft_reset(i2c_dev);
+ stm32f4_i2c_disable_it(i2c_dev);
+ complete(&i2c_dev->complete);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_i2c_xfer_msg() - Transfer a single I2C message
+ * @i2c_dev: Controller's private data
+ * @msg: I2C message to transfer
+ * @is_first: first message of the sequence
+ * @is_last: last message of the sequence
+ */
+static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev,
+ struct i2c_msg *msg, bool is_first,
+ bool is_last)
+{
+ struct stm32f4_i2c_client *c = &i2c_dev->client;
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1;
+ unsigned long timeout;
+ u32 mask;
+ int ret;
+
+ c->addr = (u8)(msg->addr << 1);
+ c->addr |= (msg->flags & I2C_M_RD);
+ c->buf = msg->buf;
+ c->count = msg->len;
+ c->result = 0;
+ c->stop = is_last;
+
+ reinit_completion(&i2c_dev->complete);
+
+ /* Enable ITEVT and ITERR interrupts */
+ mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN;
+ stm32f4_i2c_set_bits(i2c_dev->base + STM32F4_I2C_CR2, mask);
+
+ if (is_first) {
+ ret = stm32f4_i2c_wait_free_bus(i2c_dev);
+ if (ret)
+ return ret;
+
+ /* START generation */
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+ }
+
+ timeout = wait_for_completion_timeout(&i2c_dev->complete,
+ i2c_dev->adap.timeout);
+ ret = c->result;
+
+ /* Disable PEC position Ack */
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_POS);
+
+ if (!timeout) {
+ dev_err(i2c_dev->dev, "Access to slave 0x%x timed out\n",
+ c->addr >> 1);
+ ret = -ETIMEDOUT;
+ }
+
+ return ret;
+}
+
+/**
+ * stm32f4_i2c_xfer() - Transfer combined I2C message
+ * @i2c_adap: Adapter pointer to the controller
+ * @msgs: Pointer to data to be written.
+ * @num: Number of messages to be executed
+ */
+static int stm32f4_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[],
+ int num)
+{
+ struct stm32f4_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+ int ret, i;
+
+ ret = clk_enable(i2c_dev->clk);
+ if (ret) {
+ dev_err(i2c_dev->dev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ stm32f4_i2c_hw_config(i2c_dev);
+
+ for (i = 0; i < num && !ret; i++)
+ ret = stm32f4_i2c_xfer_msg(i2c_dev, &msgs[i], i == 0,
+ i == num - 1);
+
+ clk_disable(i2c_dev->clk);
+
+ return (ret < 0) ? ret : i;
+}
+
+static u32 stm32f4_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm stm32f4_i2c_algo = {
+ .master_xfer = stm32f4_i2c_xfer,
+ .functionality = stm32f4_i2c_func,
+};
+
+static int stm32f4_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct stm32f4_i2c_dev *i2c_dev;
+ struct resource *res;
+ u32 clk_rate;
+ struct i2c_adapter *adap;
+ int ret;
+
+ i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+ if (!i2c_dev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(i2c_dev->base))
+ return PTR_ERR(i2c_dev->base);
+
+ i2c_dev->irq_event = irq_of_parse_and_map(np, 0);
+ if (!i2c_dev->irq_event) {
+ dev_err(&pdev->dev, "IRQ missing or invalid\n");
+ return -EINVAL;
+ }
+
+ i2c_dev->irq_error = irq_of_parse_and_map(np, 1);
+ if (!i2c_dev->irq_error) {
+ dev_err(&pdev->dev, "IRQ missing or invalid\n");
+ return -EINVAL;
+ }
+
+ i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(i2c_dev->clk)) {
+ dev_err(&pdev->dev, "Error: Missing controller clock\n");
+ return PTR_ERR(i2c_dev->clk);
+ }
+ ret = clk_prepare(i2c_dev->clk);
+ if (ret) {
+ dev_err(i2c_dev->dev, "Failed to prepare clock\n");
+ return ret;
+ }
+
+ i2c_dev->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(i2c_dev->rst)) {
+ dev_err(&pdev->dev, "Error: Missing controller reset\n");
+ return PTR_ERR(i2c_dev->rst);
+ }
+ reset_control_assert(i2c_dev->rst);
+ udelay(2);
+ reset_control_deassert(i2c_dev->rst);
+
+ i2c_dev->speed = STM32F4_I2C_SPEED_STANDARD;
+ ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
+ if ((!ret) && (clk_rate == 400000))
+ i2c_dev->speed = STM32F4_I2C_SPEED_FAST;
+
+ i2c_dev->dev = &pdev->dev;
+
+ ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq_event,
+ NULL, stm32f4_i2c_isr_event,
+ IRQF_ONESHOT, pdev->name, i2c_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq %i\n",
+ i2c_dev->irq_error);
+ goto clk_free;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq_error,
+ NULL, stm32f4_i2c_isr_error,
+ IRQF_ONESHOT, pdev->name, i2c_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq %i\n",
+ i2c_dev->irq_error);
+ goto clk_free;
+ }
+
+ adap = &i2c_dev->adap;
+ i2c_set_adapdata(adap, i2c_dev);
+ snprintf(adap->name, sizeof(adap->name), "STM32 I2C(%pa)", &res->start);
+ adap->owner = THIS_MODULE;
+ adap->timeout = 2 * HZ;
+ adap->retries = 0;
+ adap->algo = &stm32f4_i2c_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
+
+ init_completion(&i2c_dev->complete);
+
+ ret = i2c_add_adapter(adap);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add adapter\n");
+ goto clk_free;
+ }
+
+ platform_set_drvdata(pdev, i2c_dev);
+
+ dev_info(i2c_dev->dev, "STM32F4 I2C driver initialized\n");
+
+ return 0;
+
+clk_free:
+ clk_unprepare(i2c_dev->clk);
+ return ret;
+}
+
+static int stm32f4_i2c_remove(struct platform_device *pdev)
+{
+ struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c_dev->adap);
+
+ clk_unprepare(i2c_dev->clk);
+
+ return 0;
+}
+
+static const struct of_device_id stm32f4_i2c_match[] = {
+ { .compatible = "st,stm32f4-i2c", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32f4_i2c_match);
+
+static struct platform_driver stm32f4_i2c_driver = {
+ .driver = {
+ .name = "stm32f4-i2c",
+ .of_match_table = stm32f4_i2c_match,
+ },
+ .probe = stm32f4_i2c_probe,
+ .remove = stm32f4_i2c_remove,
+};
+
+module_platform_driver(stm32f4_i2c_driver);
+
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga at gmail.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32F4 I2C driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
More information about the linux-arm-kernel
mailing list