[PATCH v3 1/3] Documentation: dt: Add Broadcom iproc pwm controller binding

[Yendapally Reddy Dhananjaya Reddy]

Add a binding for Broadcom iproc pwm controller

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy at broadcom.com>
Acked-by: Rob Herring <robh at kernel.org>
---
 .../devicetree/bindings/pwm/brcm,iproc-pwm.txt      | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt

diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt
new file mode 100644
index 0000000..21f75bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt
@@ -0,0 +1,21 @@
+Broadcom iProc PWM controller device tree bindings
+
+This controller has 4 channels.
+
+Required Properties :
+- compatible: must be "brcm,iproc-pwm"
+- reg: physical base address and length of the controller's registers
+- clocks: phandle + clock specifier pair for the external clock
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a
+  description of the cells format.
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
+Example:
+
+pwm: pwm at 18031000 {
+	compatible = "brcm,iproc-pwm";
+	reg = <0x18031000 0x28>;
+	clocks = <&osc>;
+	#pwm-cells = <3>;
+};
-- 
2.1.0