[PATCH 1/2] Documentation: bindings: Add DT bindings for ARM's FVP models.

[Jon Medhurst]

List the required properties used to describe ARM's FVP models.

Signed-off-by: Jon Medhurst <tixy at linaro.org>
---
 Documentation/devicetree/bindings/arm/arm-boards | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index ab318a5..4639a9b 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -234,3 +234,24 @@ Example:
 	};
 
 };
+
+ARM Fixed Virtual Platforms (FVP)
+---------------------------------
+FVPs are simulated platforms produced by ARM to aid software development without
+the requirement for actual hardware. They come in several families, each of
+which (usually) contain variants for different configurations of simulated
+hardware. These are documented in the Fixed Virtual Platforms FVP Reference
+Guide (reference number ARM DUI0837H).
+
+Required properties (in root node):
+- compatible value:
+	compatible = "arm,<family>,<variant>", "arm,<family>";
+  where <family> is one of:
+  - "fvp-base" for the Base FVP
+  - "fvp-ve" for the VE FVP
+  and <variant> is the part of the model's executable filename with the family
+  name omitted, converted to lower case, and with non-alphanumeric characters
+  replaced with '-'. E.g. the Base FVP that has two AEMv8 CPU clusters has an
+  executable file called FVP_Base_AEMv8A-AEMv8A, so the compatible value for
+  this would be:
+	compatible = "arm,fvp-base,aemv8a-aemv8a", "arm,fvp-base";
-- 
2.1.4