[PATCH v2 0/3] Add Broadcom iproc-static-adc controller driver

Raveendra Padasalagi raveendra.padasalagi at broadcom.com
Sun Jun 19 03:06:27 PDT 2016


This patchset contains initial driver for Broadcom's
iproc static adc controller. The patchset is based on v4.7-rc1
tag and its tested on Broadcom Cygnus SoC.

The patches can be fetched from iproc-adc-v2 branch of
https://github.com/Broadcom/arm64-linux.git

Changes since v1:
 - Modified Kconfig file to add more informative information
   in Broadcom Adc driver configuration menu.
 - Added Broadcom Adc driver menu config in the alphabetical
   order in Kconfig
 - Addressed various comments given by Peter Meerwald-Stadler
   on driver source code, Including issues related to linux
   coding style and race conditions.

Raveendra Padasalagi (3):
  Documentation: DT: Add iproc-static-adc binding
  iio: Add driver for Broadcom iproc-static-adc
  ARM:dts-Add dt node for Broadcom iproc-static-adc

 .../bindings/iio/adc/brcm,iproc-static-adc.txt     |  43 ++
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |  13 +
 drivers/iio/adc/Kconfig                            |  13 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/bcm_iproc_adc.c                    | 563 +++++++++++++++++++++
 5 files changed, 633 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
 create mode 100644 drivers/iio/adc/bcm_iproc_adc.c

-- 
1.9.1




More information about the linux-arm-kernel mailing list