[PATCHv3 2/7] EDAC, altera: Add panic flag check to A10 IRQ

[Thor Thayer]

Hi Boris,

On 06/17/2016 11:51 AM, Borislav Petkov wrote:
> On Mon, Jun 13, 2016 at 04:19:07PM -0500, tthayer at opensource.altera.com wrote:
>> From: Thor Thayer <tthayer at opensource.altera.com>
>>
>> In preparation for additional memory module ECCs, the
>> IRQ function will check a panic flag before doing a
>> kernel panic on double bit errors. ECCs on buffers
>> will not cause a kernel panic on DBERRs.
>>
>> Signed-off-by: Thor Thayer <tthayer at opensource.altera.com>
>> ---
>> v2  New patch. Add panic flag to IRQ function.
>> v3  No change
>> ---
>>   drivers/edac/altera_edac.c |    4 +++-
>>   drivers/edac/altera_edac.h |    1 +
>>   2 files changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
>> index 926bcaf..a9d8fa7 100644
>> --- a/drivers/edac/altera_edac.c
>> +++ b/drivers/edac/altera_edac.c
>> @@ -897,7 +897,8 @@ static irqreturn_t altr_edac_a10_ecc_irq(int irq, void *dev_id)
>>   		writel(ALTR_A10_ECC_DERRPENA,
>>   		       base + ALTR_A10_ECC_INTSTAT_OFST);
>>   		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
>> -		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
>> +		if (dci->data->panic)
>> +			panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
>>
>>   		return IRQ_HANDLED;
>>   	}
>> @@ -936,6 +937,7 @@ const struct edac_device_prv_data a10_ocramecc_data = {
>>   	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
>>   	.ecc_irq_handler = altr_edac_a10_ecc_irq,
>>   	.inject_fops = &altr_edac_a10_device_inject_fops,
>> +	.panic = true,
>
> So I could use a bit more detailed explanation here why OCRAM must panic
> and the others don't. Consider me an external guy who doesn't know the
> hardware and is looking at the driver and is wondering why this IP must
> panic on double-bit errors and the others don't.
>
> :-)
>
> Thanks.
>
That is a good question. We have 2 important uses for OCRAM 1) to hold 
our power-down/sleep and resume functions and 2) to hold our FPGA 
contents during sleep. If either of these is corrupted, it is better to 
panic than to load something that would cause incorrect.

In the cases of the FIFOs such as Ethernet and USB, the plan is to add 
code to drop the packet so that we'll get a re-transmission. In that 
case, it is sort of recoverable.

Thor