[PATCH v6 02/15] KVM: arm/arm64: check return value for kvm_register_vgic_device
Andre Przywara
andre.przywara at arm.com
Fri Jun 17 05:08:34 PDT 2016
kvm_register_device_ops() can return an error, so lets check its return
value and propagate this up the call chain.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
virt/kvm/arm/vgic/vgic-kvm-device.c | 15 +++++++++------
virt/kvm/arm/vgic/vgic-v2.c | 7 ++++++-
virt/kvm/arm/vgic/vgic-v3.c | 15 +++++++++++++--
virt/kvm/arm/vgic/vgic.h | 2 +-
4 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-kvm-device.c b/virt/kvm/arm/vgic/vgic-kvm-device.c
index 0130c4b..2f24f13 100644
--- a/virt/kvm/arm/vgic/vgic-kvm-device.c
+++ b/virt/kvm/arm/vgic/vgic-kvm-device.c
@@ -210,20 +210,24 @@ static void vgic_destroy(struct kvm_device *dev)
kfree(dev);
}
-void kvm_register_vgic_device(unsigned long type)
+int kvm_register_vgic_device(unsigned long type)
{
+ int ret = -ENODEV;
+
switch (type) {
case KVM_DEV_TYPE_ARM_VGIC_V2:
- kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
- KVM_DEV_TYPE_ARM_VGIC_V2);
+ ret = kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
+ KVM_DEV_TYPE_ARM_VGIC_V2);
break;
#ifdef CONFIG_KVM_ARM_VGIC_V3
case KVM_DEV_TYPE_ARM_VGIC_V3:
- kvm_register_device_ops(&kvm_arm_vgic_v3_ops,
- KVM_DEV_TYPE_ARM_VGIC_V3);
+ ret = kvm_register_device_ops(&kvm_arm_vgic_v3_ops,
+ KVM_DEV_TYPE_ARM_VGIC_V3);
break;
#endif
}
+
+ return ret;
}
/** vgic_attr_regs_access: allows user space to read/write VGIC registers
@@ -428,4 +432,3 @@ struct kvm_device_ops kvm_arm_vgic_v3_ops = {
};
#endif /* CONFIG_KVM_ARM_VGIC_V3 */
-
diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
index e31405e..80313de 100644
--- a/virt/kvm/arm/vgic/vgic-v2.c
+++ b/virt/kvm/arm/vgic/vgic-v2.c
@@ -344,7 +344,12 @@ int vgic_v2_probe(const struct gic_kvm_info *info)
}
kvm_vgic_global_state.can_emulate_gicv2 = true;
- kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2);
+ ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2);
+ if (ret) {
+ kvm_err("Cannot register GICv2 KVM device\n");
+ iounmap(kvm_vgic_global_state.vctrl_base);
+ return ret;
+ }
kvm_vgic_global_state.vcpu_base = info->vcpu.start;
kvm_vgic_global_state.type = VGIC_V2;
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
index 346b4ad..e48a22e 100644
--- a/virt/kvm/arm/vgic/vgic-v3.c
+++ b/virt/kvm/arm/vgic/vgic-v3.c
@@ -296,6 +296,7 @@ out:
int vgic_v3_probe(const struct gic_kvm_info *info)
{
u32 ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
+ int ret;
/*
* The ListRegs field is 5 bits, but there is a architectural
@@ -319,12 +320,22 @@ int vgic_v3_probe(const struct gic_kvm_info *info)
} else {
kvm_vgic_global_state.vcpu_base = info->vcpu.start;
kvm_vgic_global_state.can_emulate_gicv2 = true;
- kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2);
+ ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2);
+ if (ret) {
+ kvm_err("Cannot register GICv2 KVM device.\n");
+ return ret;
+ }
kvm_info("vgic-v2@%llx\n", info->vcpu.start);
}
+ ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V3);
+ if (ret) {
+ kvm_err("Cannot register GICv3 KVM device.\n");
+ kvm_unregister_device_ops(KVM_DEV_TYPE_ARM_VGIC_V2);
+ return ret;
+ }
+
if (kvm_vgic_global_state.vcpu_base == 0)
kvm_info("disabling GICv2 emulation\n");
- kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V3);
kvm_vgic_global_state.vctrl_base = NULL;
kvm_vgic_global_state.type = VGIC_V3;
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 7b300ca..c752152 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -124,7 +124,7 @@ static inline int vgic_register_redist_iodevs(struct kvm *kvm,
}
#endif
-void kvm_register_vgic_device(unsigned long type);
+int kvm_register_vgic_device(unsigned long type);
int vgic_lazy_init(struct kvm *kvm);
int vgic_init(struct kvm *kvm);
--
2.8.2
More information about the linux-arm-kernel
mailing list