[PATCH 09/12] power: pwrseq: pwrseq_usb_generic: add generic power sequence support for USB deivces
Peter Chen
peter.chen at nxp.com
Fri Jun 17 03:09:22 PDT 2016
Add driver for generic power sequence support for USB deivces
which handles below things:
- Clock and its frequencies
- GPIO for reset and the duration time
- GPIO for enable
- Regulator for power
Signed-off-by: Peter Chen <peter.chen at nxp.com>
---
drivers/power/pwrseq/Kconfig | 11 ++
drivers/power/pwrseq/Makefile | 1 +
drivers/power/pwrseq/pwrseq_usb_generic.c | 202 ++++++++++++++++++++++++++++++
3 files changed, 214 insertions(+)
create mode 100644 drivers/power/pwrseq/pwrseq_usb_generic.c
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index c7e9271..9749c6d 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -29,4 +29,15 @@ config POWER_SEQ_SIMPLE
This driver can also be built as a module. If so, the module
will be called pwrseq_simple.
+config POWER_SEQ_USB_GENERIC
+ tristate "Generic power sequence support for USB devices"
+ default y
+ depends on OF || COMPILE_TEST
+ help
+ This selects generic power sequence support for USB devices.
+ By default this option is set to y.
+
+ This driver can also be built as a module. If so, the module
+ will be called pwrseq_usb_generic.
+
endif
diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile
index d475e01..230bb45 100644
--- a/drivers/power/pwrseq/Makefile
+++ b/drivers/power/pwrseq/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_POWER_SEQ) += core.o
obj-$(CONFIG_POWER_SEQ_SIMPLE) += pwrseq_mmc_simple.o
obj-$(CONFIG_POWER_SEQ_EMMC) += pwrseq_emmc.o
+obj-$(CONFIG_POWER_SEQ_USB_GENERIC) += pwrseq_usb_generic.o
diff --git a/drivers/power/pwrseq/pwrseq_usb_generic.c b/drivers/power/pwrseq/pwrseq_usb_generic.c
new file mode 100644
index 0000000..6017636
--- /dev/null
+++ b/drivers/power/pwrseq/pwrseq_usb_generic.c
@@ -0,0 +1,202 @@
+/*
+ * usb_generic.c The generic power sequence driver for USB device
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Author: Peter Chen <peter.chen at nxp.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/pwrseq.h>
+
+struct usb_pwrseq_generic {
+ struct pwrseq pwrseq;
+ struct gpio_desc *gpiod_reset;
+ struct gpio_desc *gpiod_enable;
+ struct clk *clk;
+ struct regulator *reg_power;
+};
+
+#define to_pwrseq_generic(p) container_of(p, struct usb_pwrseq_generic, pwrseq)
+
+static void usb_pwrseq_power_off(struct pwrseq *_pwrseq)
+{
+ struct usb_pwrseq_generic *pwrseq = to_pwrseq_generic(_pwrseq);
+
+ if (pwrseq->clk)
+ clk_disable_unprepare(pwrseq->clk);
+
+ if (pwrseq->gpiod_enable)
+ gpiod_set_value(pwrseq->gpiod_enable, 0);
+
+ if (pwrseq->reg_power)
+ regulator_disable(pwrseq->reg_power);
+}
+
+static int usb_pwrseq_power_on(struct pwrseq *_pwrseq)
+{
+ struct usb_pwrseq_generic *pwrseq = to_pwrseq_generic(_pwrseq);
+ struct gpio_desc *gpiod_reset = pwrseq->gpiod_reset;
+ struct gpio_desc *gpiod_enable = pwrseq->gpiod_enable;
+ struct device *dev = _pwrseq->dev;
+ struct device_node *node = dev->of_node;
+ u32 duration_us = 50, clk_rate = 0;
+ int ret;
+
+ if (pwrseq->clk) {
+ ret = clk_prepare_enable(pwrseq->clk);
+ if (ret) {
+ dev_err(dev,
+ "Can't enable external clock: %d\n",
+ ret);
+ return ret;
+ }
+
+ of_property_read_u32(node, "clock-frequency", &clk_rate);
+ if (clk_rate) {
+ ret = clk_set_rate(pwrseq->clk, clk_rate);
+ if (ret) {
+ dev_err(dev, "Error setting clock rate\n");
+ goto disable_clk;
+ }
+ }
+ }
+
+ if (gpiod_reset) {
+ of_property_read_u32(node, "reset-duration-us", &duration_us);
+ gpiod_direction_output(gpiod_reset, 1);
+
+ gpiod_set_value(gpiod_reset, 1);
+ usleep_range(duration_us, duration_us + 10);
+ gpiod_set_value(gpiod_reset, 0);
+ }
+
+ if (gpiod_enable) {
+ gpiod_direction_output(gpiod_enable, 1);
+ gpiod_set_value(gpiod_enable, 1);
+ }
+
+ if (pwrseq->reg_power) {
+ ret = regulator_enable(pwrseq->reg_power);
+ if (ret) {
+ dev_err(dev, "Failed to power regulator, ret=%d\n",
+ ret);
+ goto disable_gpio;
+ }
+ }
+
+ return 0;
+
+disable_gpio:
+ if (gpiod_enable)
+ gpiod_set_value(gpiod_enable, 0);
+
+disable_clk:
+ if (pwrseq->clk)
+ clk_disable_unprepare(pwrseq->clk);
+ return ret;
+}
+
+static const struct pwrseq_ops usb_pwrseq_generic_ops = {
+ .pre_power_on = usb_pwrseq_power_on,
+ .power_off = usb_pwrseq_power_off,
+};
+
+static const struct of_device_id usb_pwrseq_generic_of_match[] = {
+ { .compatible = "usb-pwrseq-generic",},
+ {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, usb_pwrseq_generic_of_match);
+
+static int usb_pwrseq_generic_probe(struct platform_device *pdev)
+{
+ struct usb_pwrseq_generic *pwrseq;
+ struct device *dev = &pdev->dev;
+ struct regulator *reg;
+ int ret;
+
+ pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
+ if (!pwrseq)
+ return -ENOMEM;
+
+ pwrseq->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(pwrseq->clk)) {
+ dev_dbg(dev, "Can't get clock: %ld\n",
+ PTR_ERR(pwrseq->clk));
+ pwrseq->clk = NULL;
+ }
+
+ pwrseq->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_ASIS);
+ ret = PTR_ERR_OR_ZERO(pwrseq->gpiod_reset);
+ if (ret) {
+ dev_err(dev, "Failed to get reset gpio, err = %d\n", ret);
+ return ret;
+ }
+
+ pwrseq->gpiod_enable = devm_gpiod_get_optional(dev, "enable",
+ GPIOD_ASIS);
+ ret = PTR_ERR_OR_ZERO(pwrseq->gpiod_enable);
+ if (ret) {
+ dev_err(dev, "Failed to get enable gpio, err = %d\n", ret);
+ return ret;
+ }
+
+ reg = devm_regulator_get(dev, "power");
+ if (PTR_ERR(reg) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ else if (PTR_ERR(reg) == -ENODEV)
+ /* no power regulator is needed */
+ reg = NULL;
+ else if (IS_ERR(reg))
+ return PTR_ERR(reg);
+ pwrseq->reg_power = reg;
+
+ pwrseq->pwrseq.dev = dev;
+ pwrseq->pwrseq.ops = &usb_pwrseq_generic_ops;
+ pwrseq->pwrseq.owner = THIS_MODULE;
+ platform_set_drvdata(pdev, pwrseq);
+
+ return pwrseq_register(&pwrseq->pwrseq);
+}
+
+static int usb_pwrseq_generic_remove(struct platform_device *pdev)
+{
+ struct usb_pwrseq_generic *pwrseq = platform_get_drvdata(pdev);
+
+ pwrseq_unregister(&pwrseq->pwrseq);
+
+ return 0;
+}
+
+static struct platform_driver usb_pwrseq_generic_driver = {
+ .probe = usb_pwrseq_generic_probe,
+ .remove = usb_pwrseq_generic_remove,
+ .driver = {
+ .name = "usb_pwrseq_generic",
+ .of_match_table = usb_pwrseq_generic_of_match,
+ },
+};
+
+module_platform_driver(usb_pwrseq_generic_driver);
+MODULE_LICENSE("GPL v2");
--
1.9.1
More information about the linux-arm-kernel
mailing list