[PATCH 4/6] [media] s5p-jpeg: only fill driver's name in capabilities driver field

[Jacek Anaszewski]

Hi Javier,

On 06/16/2016 11:40 PM, Javier Martinez Canillas wrote:
> The driver fills in both the struct v4l2_capability driver and card fields
> the same values, that is the driver's name plus the information if the dev
> is a decoder or an encoder.
>
> But the driver field has a fixed length of 16 bytes so the filled data is
> truncated:
>
> Driver Info (not using libv4l2):
>          Driver name   : s5p-jpeg decode
>          Card type     : s5p-jpeg decoder
>          Bus info      : platform:11f50000.jpeg
>          Driver version: 4.7.0
>
> Also, this field should only contain the driver's name so use just that.
> The information if the device is a decoder or an encoder is in the card
> type field anyways.
>
> Signed-off-by: Javier Martinez Canillas <javier at osg.samsung.com>
> ---
>
>   drivers/media/platform/s5p-jpeg/jpeg-core.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> index e3ff3d4bd72e..f9fb52a53e79 100644
> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> @@ -1246,12 +1246,12 @@ static int s5p_jpeg_querycap(struct file *file, void *priv,
>   	struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
>
>   	if (ctx->mode == S5P_JPEG_ENCODE) {
> -		strlcpy(cap->driver, S5P_JPEG_M2M_NAME " encoder",
> +		strlcpy(cap->driver, S5P_JPEG_M2M_NAME,
>   			sizeof(cap->driver));
>   		strlcpy(cap->card, S5P_JPEG_M2M_NAME " encoder",
>   			sizeof(cap->card));
>   	} else {
> -		strlcpy(cap->driver, S5P_JPEG_M2M_NAME " decoder",
> +		strlcpy(cap->driver, S5P_JPEG_M2M_NAME,
>   			sizeof(cap->driver));
>   		strlcpy(cap->card, S5P_JPEG_M2M_NAME " decoder",
>   			sizeof(cap->card));
>

Acked-by: Jacek Anaszewski <j.anaszewski at samsung.com>

-- 
Best regards,
Jacek Anaszewski