[PATCH 5/7] ata: ahci_brcm: Add support for Broadcom NSP SoC
Yendapally Reddy Dhananjaya Reddy
yendapally.reddy at broadcom.com
Thu Jun 16 06:53:33 PDT 2016
Add SATA3 support for Broadcom NSP SoC
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy at broadcom.com>
---
drivers/ata/Kconfig | 2 +-
drivers/ata/ahci_brcm.c | 46 ++++++++++++++++++++++++++++++++++++----------
2 files changed, 37 insertions(+), 11 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 8fe06e6..2c8be74 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -100,7 +100,7 @@ config SATA_AHCI_PLATFORM
config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
help
This option enables support for the AHCI SATA3 controller found on
Broadcom SoC's.
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index e87bcec..6f8a734 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -71,6 +71,12 @@
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+enum brcm_ahci_version {
+ BRCM_SATA_BCM7425 = 1,
+ BRCM_SATA_BCM7445,
+ BRCM_SATA_NSP,
+};
+
enum brcm_ahci_quirks {
BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
@@ -81,6 +87,7 @@ struct brcm_ahci_priv {
void __iomem *top_ctrl;
u32 port_mask;
u32 quirks;
+ enum brcm_ahci_version version;
};
static const struct ata_port_info ahci_brcm_port_info = {
@@ -247,9 +254,19 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
+ void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
+
/* Configure endianness */
- brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
- priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+ if (priv->version == BRCM_SATA_NSP) {
+ u32 data = brcm_sata_readreg(ctrl);
+
+ data &= ~((0x03 << DMADATA_ENDIAN_SHIFT) |
+ (0x03 << DMADESC_ENDIAN_SHIFT));
+ data |= (0x02 << DMADATA_ENDIAN_SHIFT) |
+ (0x02 << DMADESC_ENDIAN_SHIFT);
+ brcm_sata_writereg(data, ctrl);
+ } else
+ brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, ctrl);
}
#ifdef CONFIG_PM_SLEEP
@@ -282,8 +299,17 @@ static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
+static const struct of_device_id ahci_of_match[] = {
+ {.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
+ {.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
+ {.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
static int brcm_ahci_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
struct brcm_ahci_priv *priv;
struct ahci_host_priv *hpriv;
@@ -293,6 +319,12 @@ static int brcm_ahci_probe(struct platform_device *pdev)
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+
+ of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
+ if (!of_id)
+ return -ENODEV;
+
+ priv->version = (enum brcm_ahci_version)of_id->data;
priv->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
@@ -300,7 +332,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
- if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
+ if ((priv->version == BRCM_SATA_BCM7425) ||
+ (priv->version == BRCM_SATA_NSP)) {
priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
}
@@ -354,13 +387,6 @@ static int brcm_ahci_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id ahci_of_match[] = {
- {.compatible = "brcm,bcm7425-ahci"},
- {.compatible = "brcm,bcm7445-ahci"},
- {},
-};
-MODULE_DEVICE_TABLE(of, ahci_of_match);
-
static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
static struct platform_driver brcm_ahci_driver = {
--
2.1.0
More information about the linux-arm-kernel
mailing list