[PATCH 3/5] clk: max77686: Add DT binding details for PMIC MAX77620

[Laxman Dewangan]

Maxim has used the same clock IP on multiple PMICs like
MAX77686, MAX77802, MAX77620. Only differences are the
number of clocks from these PMICs.

Add clock binding details and example for the max77620 in
maxim,max77686.

Signed-off-by: Laxman Dewangan <ldewangan at nvidia.com>
CC: Krzysztof Kozlowski <k.kozlowski at samsung.com>
CC: Javier Martinez Canillas <javier at dowhile0.org>
---
 .../devicetree/bindings/clock/maxim,max77686.txt   | 38 +++++++++++++++++++---
 include/dt-bindings/mfd/max77620.h                 |  4 +++
 2 files changed, 38 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 354e5ab..24deb19 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -1,8 +1,11 @@
-Binding for Maxim MAX77686/MAX77802 32k clock generator block
+Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
 
-This is a part of device tree bindings of MAX77686/MAX77802 multi-function
-device. More information can be found in bindings/mfd/max77686.txt file for
-MAX77686 and bindings/mfd/max77802.txt for MAX77802.
+This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
+multi-function device. More information can be found in MFD DT binding
+doc as follows:
+	bindings/mfd/max77686.txt for MAX77686 and
+	bindings/mfd/max77802.txt for MAX77802 and
+	bindings/mfd/max77620.txt for MAX77620.
 
 The MAX77686 contains three 32.768khz clock outputs that can be controlled
 (gated/ungated) over I2C.
@@ -10,6 +13,9 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled
 The MAX77802 contains two 32.768khz clock outputs that can be controlled
 (gated/ungated) over I2C.
 
+The MAX77686 contains one 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
 Following properties should be presend in main device node of the MFD chip.
 
 Required properties:
@@ -82,3 +88,27 @@ Example:
 			clock-names = "my-clock";
 			clocks = <&max77802 MAX77802_CLK_32K_AP>;
 		};
+
+
+3. With MAX77620:
+
+#include <dt-bindings/mfd/max77620.h>
+:::
+
+	Node of the MFD chip
+		max77620: max77620 at 3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			:::
+			#clock-cells = <1>;
+			:::
+		};
+
+	Clock consumer node
+
+		foo at 0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
+		};
diff --git a/include/dt-bindings/mfd/max77620.h b/include/dt-bindings/mfd/max77620.h
index b911a07..e1bd08c 100644
--- a/include/dt-bindings/mfd/max77620.h
+++ b/include/dt-bindings/mfd/max77620.h
@@ -36,4 +36,8 @@
 #define MAX77620_FPS_SRC_NONE			3
 #define MAX77620_FPS_SRC_DEF			4
 
+/* MAX77686 clocks */
+#define MAX77620_CLKS_NUM			1
+#define MAX77620_CLK_32K_OUT0			0
+
 #endif
-- 
2.1.4