[PATCH] perf annotate: ARM64 support

[Chris Ryder]

On Wed, Jun 15, 2016 at 10:08:48AM +0100, Will Deacon wrote:
> Hi Andrew,
> 
> [adding acme and Chris]
> 
> Thanks for this.
> 
> On Sat, Jun 11, 2016 at 08:58:22PM -0700, Andrew Pinski wrote:
> > Add basic support to parse ARM64 assembly.
> > 
> > This:
> > 
> > * enables perf to correctly show the disassembly, rather than chopping
> >   some constants off at the '#'.  '#' is not the comment character
> >   for ARM64.
> > 
> > * allows perf to identify ARM64 instructions that branch to other parts
> >   within the same function, thereby properly annotating them.
> > 
> > * allows perf to identify function calls, allowing called functions to
> >   be followed in the annotated view.
> 
> It's probably worth working with Chris on this, since he was doing something
> similar for AArch32:

Actually the whole patchset was ultimately adding AArch64 support as
well.

> 
>   http://lkml.kernel.org/r/20160520094407.GB26584@arm.com
> 
> Chris -- did you get a chance to re-spin that series?

I haven't had chance to re-spin yet, as it's a side project of mine and not
my main job - but I might get some time to work on it this week. Very happy
to work with Andrew on this though.

Chris.

> Will
> 
> > Signed-off-by: Andrew Pinski <apinski at cavium.com>
> > ---
> >  tools/perf/util/annotate.c | 64 +++++++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 61 insertions(+), 3 deletions(-)
> > 
> > diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
> > index 7e5a1e8..ea915e8 100644
> > --- a/tools/perf/util/annotate.c
> > +++ b/tools/perf/util/annotate.c
> > @@ -65,7 +65,7 @@ static int call__parse(struct ins_operands *ops)
> >  
> >  	name++;
> >  
> > -#ifdef __arm__
> > +#if defined(__arm__) || defined(__aarch64__)
> >  	if (strchr(name, '+'))
> >  		return -1;
> >  #endif
> > @@ -119,9 +119,22 @@ bool ins__is_call(const struct ins *ins)
> >  
> >  static int jump__parse(struct ins_operands *ops)
> >  {
> > -	const char *s = strchr(ops->raw, '+');
> > +	const char *raw = ops->raw;
> > +	const char *s;
> > +#ifdef __aarch64__
> > +	/* Skip over one or two commas so that cbz and tbz works. */
> > +	const char *comma = strchr(raw, ',');
> > +
> > +	if (comma) {
> > +		raw = comma + 1;
> > +		comma = strchr(raw, ',');
> > +		if (comma)
> > +			raw = comma + 1;
> > +	}
> > +#endif
> > +	s = strchr(raw, '+');
> >  
> > -	ops->target.addr = strtoull(ops->raw, NULL, 16);
> > +	ops->target.addr = strtoull(raw, NULL, 16);
> >  
> >  	if (s++ != NULL)
> >  		ops->target.offset = strtoull(s, NULL, 16);
> > @@ -134,6 +147,25 @@ static int jump__parse(struct ins_operands *ops)
> >  static int jump__scnprintf(struct ins *ins, char *bf, size_t size,
> >  			   struct ins_operands *ops)
> >  {
> > +#ifdef __aarch64__
> > +	const char *comma0 = strchr(ops->raw, ',');
> > +
> > +	if (comma0) {
> > +		const char *comma1 = strchr(comma0 + 1, ',');
> > +
> > +		if (comma1)
> > +			return scnprintf(bf, size,
> > +					 "%-6.6s %.*s, %.*s, %" PRIx64,
> > +					 ins->name,
> > +					 (int)(comma0 - ops->raw), ops->raw,
> > +					 (int)(comma1 - comma0 - 1), comma0 + 1,
> > +					 ops->target.offset);
> > +
> > +		return scnprintf(bf, size, "%-6.6s %.*s, %" PRIx64, ins->name,
> > +				 (int)(comma0 - ops->raw), ops->raw,
> > +				 ops->target.offset);
> > +	}
> > +#endif
> >  	return scnprintf(bf, size, "%-6.6s %" PRIx64, ins->name, ops->target.offset);
> >  }
> >  
> > @@ -253,6 +285,8 @@ static int mov__parse(struct ins_operands *ops)
> >  	target = ++s;
> >  #ifdef __arm__
> >  	comment = strchr(s, ';');
> > +#elif defined(__aarch64__)
> > +	comment = strstr(s, "//");
> >  #else
> >  	comment = strchr(s, '#');
> >  #endif
> > @@ -355,6 +389,29 @@ static struct ins_ops nop_ops = {
> >  };
> >  
> >  static struct ins instructions[] = {
> > +#ifdef __aarch64__
> > +	{ .name = "b",     .ops  = &jump_ops, }, // might also be a call
> > +	{ .name = "b.cc",  .ops  = &jump_ops, },
> > +	{ .name = "b.cs",  .ops  = &jump_ops, },
> > +	{ .name = "b.eq",  .ops  = &jump_ops, },
> > +	{ .name = "b.ge",  .ops  = &jump_ops, },
> > +	{ .name = "b.gt",  .ops  = &jump_ops, },
> > +	{ .name = "b.hi",  .ops  = &jump_ops, },
> > +	{ .name = "b.le",  .ops  = &jump_ops, },
> > +	{ .name = "b.ls",  .ops  = &jump_ops, },
> > +	{ .name = "b.lt",  .ops  = &jump_ops, },
> > +	{ .name = "b.ne",  .ops  = &jump_ops, },
> > +	{ .name = "b.pl",  .ops  = &jump_ops, },
> > +	{ .name = "bl",    .ops  = &call_ops, },
> > +	{ .name = "cbnz",  .ops  = &jump_ops, },
> > +	{ .name = "cbz",   .ops  = &jump_ops, },
> > +	{ .name = "dec",   .ops  = &dec_ops, },
> > +	{ .name = "lock",  .ops  = &lock_ops, }, // fake one
> > +	{ .name = "mov",   .ops  = &mov_ops, },
> > +	{ .name = "nop",   .ops  = &nop_ops, },
> > +	{ .name = "tbnz",  .ops  = &jump_ops, },
> > +	{ .name = "tbz",   .ops  = &jump_ops, },
> > +#else
> >  	{ .name = "add",   .ops  = &mov_ops, },
> >  	{ .name = "addl",  .ops  = &mov_ops, },
> >  	{ .name = "addq",  .ops  = &mov_ops, },
> > @@ -444,6 +501,7 @@ static struct ins instructions[] = {
> >  	{ .name = "xadd",  .ops  = &mov_ops, },
> >  	{ .name = "xbeginl", .ops  = &jump_ops, },
> >  	{ .name = "xbeginq", .ops  = &jump_ops, },
> > +#endif
> >  };
> >  
> >  static int ins__key_cmp(const void *name, const void *insp)
> > -- 
> > 1.9.1
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> > 
>