[PATCH 0/3] Add Broadcom iproc-static-adc controller driver

[Raveendra Padasalagi]

This patchset contains initial driver for Broadcom's
iproc static adc controller. The patchset is based on v4.7-rc1
tag and its tested on Broadcom Cygnus SoC.

The patches can be fetched from iproc-adc-v1 branch of
https://github.com/Broadcom/arm64-linux.git

Raveendra Padasalagi (3):
  Documentation: DT: Add iproc-static-adc binding
  iio: Add driver for Broadcom iproc-static-adc
  ARM:dts-Add dt node for Broadcom iproc-static-adc

 .../bindings/iio/adc/brcm,iproc-static-adc.txt     |  43 ++
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |  13 +
 drivers/iio/adc/Kconfig                            |  12 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/bcm_iproc_adc.c                    | 556 +++++++++++++++++++++
 5 files changed, 625 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
 create mode 100644 drivers/iio/adc/bcm_iproc_adc.c

-- 
1.9.1