[PATCH v3 09/14] regulator: pwm: Adjust PWM config at probe time

[Boris Brezillon]

The PWM attached to a PWM regulator device might have been previously
configured by the bootloader.
Make sure the bootloader and linux config are in sync, and adjust the PWM
config if that's not the case.

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Acked-by: Mark Brown <broonie at kernel.org>
Acked-by: Brian Norris <briannorris at chromium.org>
Tested-by: Brian Norris <briannorris at chromium.org>
Tested-by: Heiko Stuebner <heiko at sntech.de>
---
 drivers/regulator/pwm-regulator.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index ab3cc02..524b43f 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -285,11 +285,9 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to the
-	 * atomic PWM API.
-	 */
-	pwm_apply_args(drvdata->pwm);
+	ret = pwm_adjust_config(drvdata->pwm);
+	if (ret)
+		return ret;
 
 	regulator = devm_regulator_register(&pdev->dev,
 					    &drvdata->desc, &config);
-- 
2.7.4