[PATCH 05/12] mmc: sdhci: add a pre voltage switch callback function
Gregory CLEMENT
gregory.clement at free-electrons.com
Tue Jun 14 00:59:52 PDT 2016
Hi Adrian,
On lun., juin 13 2016, Adrian Hunter <adrian.hunter at intel.com> wrote:
> On 09/06/16 10:10, Gregory CLEMENT wrote:
>> From: Victor Gu <xigu at marvell.com>
>>
>> Some host controller such as Xenon needs additional setting when
>> switching signal voltage in eMMC mode. They also need to re-enable
>> internal clock before a voltage switch.
>>
>> This commit adds a callback routine "voltage_switch_pre" in the struct
>> sdhci_ops, which is used by some host controllers which need re-enable
>> the internal clock before a voltage switch.
>
> Don't want to add sdhci host ops for the "do something before a mmc host op"
> case.
>
> Instead, export sdhci_start_signal_voltage_switch() and hook
> host->mmc_host_ops.start_signal_voltage_switch. Then in sdhci-xenon.c:
>
> int xenon__start_signal_voltage_switch(struct mmc_host *mmc,
> struct mmc_ios *ios)
> {
> blah blah
> return sdhci_start_signal_voltage_switch(mmc, ios);
> }
OK I see your point.
Thanks,
Gregory
>
>
>>
>> [gregory.clement at free-electrons.com: split the initial commit and
>> reformulate the log]
>>
>> Signed-off-by: Victor Gu <xigu at marvell.com>
>> Signed-off-by: Marcin Wojtas <mw at semihalf.com>
>> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
>> ---
>> drivers/mmc/host/sdhci.c | 4 ++++
>> drivers/mmc/host/sdhci.h | 1 +
>> 2 files changed, 5 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index b07219426d39..cad03ffa9d9b 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -1729,6 +1729,10 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
>> if (host->version < SDHCI_SPEC_300)
>> return 0;
>>
>> + /* Some controller need to do more before switching */
>> + if (host->ops->voltage_switch_pre)
>> + host->ops->voltage_switch_pre(host);
>> +
>> ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
>>
>> switch (ios->signal_voltage) {
>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>> index 49c6c5b0e33b..6bec1b0368d2 100644
>> --- a/drivers/mmc/host/sdhci.h
>> +++ b/drivers/mmc/host/sdhci.h
>> @@ -550,6 +550,7 @@ struct sdhci_ops {
>> unsigned int max_dtr, int host_drv,
>> int card_drv, int *drv_type);
>> void (*init_card)(struct sdhci_host *host, struct mmc_card *card);
>> + void (*voltage_switch_pre)(struct sdhci_host *host);
>> };
>>
>> #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
>>
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list